Yamaha IF2112/AS Speaker

Yamaha IF2112M/64

Speaker

  Mackie |Yamaha Professional Audio | Steinberg | JBL   | Sound Devices |  Azden  | SHURE |  Sennheiser  | Tascam  | Data video Feedbacks Contact Us  |  Email Us |  Visit Us |

Home > Yamaha Professional Audio > Speakers > IF2112M/64

 Yamaha IF2112M/64 Speaker

Yamaha IF2112/AS Speaker
Product Code: IF2112M/64

Buy Sell Sales Yamaha IF2112/AS Speaker

Yamaha's new Installation Series Speakers address a number of important issues that give them unprecedented performance and handling characteristics for live sound applications, including permanent installations. In particular, phase characteristics have been kept smooth and consistent throughout the entire series, so you can mix and match speakers to suit any system and venue without ending up with hot and dead spots due to phase interference. And of course sonic quality is superb throughout the entire reproduction range so the full impact of the source material reaches the audience undiluted.

• 12" woofer and 1.7" high-frequency compression driver with 1.4" exit.
• Horn can be rotated 90-degrees, allowing vertical or horizontal mounting.
• Trapezoidal design eliminates interference in array use.
• Switchable between single-amp and bi-amp operation.
• Fifteen 10 mm-screw (M10) and four 8 mm-screw (M8) suspension points provided for flexible rigging.
• Durable black or white finish (can be painted to match any interior).
• Optional matching array frame and U-bracket available.
• Parallel-wired Neutrik NL4 and barrier strip connectors.

A Wide Selection of Models Accommodate the Widest Possible Range of Installations
Two important criteria for speakers to be used in installations are installation/positioning ease and service area controllability. The Yamaha Installation Series includes 16 different models with speakers from 5 to 15 inches in 2-way, main, support, floor monitor, subwoofer, and other configurations. With a range of driver sizes, single and dual woofers, and a variety of external configurations, these speakers integrate easily into a wide variety of installations. The 12-inch and 15-inch models are available with four different coverage angles. By selecting and combining the appropriate models it is possible to create systems that provide any type of coverage required - from near to far, narrow to wide. Furthermore, all models feature rotatable horns to allow vertical or horizontal operation. In addition to multiple rigging points for convenient flying/hanging installation, specialized U-brackets and array frames are available to accommodate just about any installation requirements. (Four eye bolts are provided with all models except the IF2205 and IF2205W).

Consistent Sound and Phase Characteristics
Most installations involve the positioning of multiple speakers at numerous locations. The Installation Series offers a range of models that can be combined as required while delivering the most natural sound field possible, with the greatest controllability. The Installation Series has been specifically designed to provide an acoustic "white canvas" on which the most delicate tonal gradations will stand out clearly. The entire lineup has been designed with consistent phase characteristics so that they will deliver optimum performance in any combination, and respond smoothly to equalization for unprecedented installation flexibility and natural sound.

A Range of Processing Data Available for Yamaha DME Series Processors
The Installation Series speakers will deliver peak performance when used with Yamaha digital mixing consoles such as the PM5D, or DME series digital mixing engines. In particular, a range of speaker processing programs specifically designed to bring out the best in the Installation Series are available for DME series digital mixing engines. Even with complex multi-speaker systems you only need to select the appropriate program to be running at optimum performance in no time.
 

Yamaha IF2112M/64

Cabinets
Building a high-performance speaker cabinet is a lot more complex than simply building a solid box. The materials used, size, shape, bracing, porting, acoustic treatment and other factors all interact to determine the final performance of the design. This can be partly determined by good old science and engineering, but a lot also hinges on experience and exhaustive listening and field tests. Yamaha Installation Series Speakers feature cabinets constructed from high-quality 11-ply Finland birch, as much as 16 millimeters thick in most models. Solid gluing of all joints and critical placement of internal bracing results in cabinets that are virtually indestructible as well as free from resonance. The cabinets also feature a wrap-around grille that, in addition to being aesthetically pleasing, minimizes reflections from the cabinet frame.
   

Yamaha IF2112M/64

Horns
To allow the system designer maximum freedom and flexibility, all Yamaha Installation Series Speakers feature rotatable horns in a variety of configurations. 60º×40º, 90º×50º, and 90º×90º horns are available for the 12-inch and 15-inch models, while 60º×40º and 90º×50º horns are available for the 3-way designs. 8-inch and 5-inch models feature 90º×60º horns. Horns are made from fiber-reinforced plastic to minimize unwanted resonance.
   

Yamaha IF2112M/64

Networks
Selected top-quality crossover network parts including heavy-gauge inductor wire, large film capacitors, and painstakingly designed circuit boards deliver unmatched sonic quality and reliability. Heavy 16-gauge wire is used for all internal wiring.
   

Yamaha IF2112M/64

Drivers
HF drivers feature one-piece titanium domes formed to precision tolerances for superior sound as well as long-term reliability. 12-inch, 15-inch and 18-inch woofer cones have been specially treated for water resistance, providing optimum durability in the widest range of operating environments.
   

Yamaha IF2112M/64

Finish
The fact that speakers must sound good goes without saying, but in permanent installations they have to look good and match the interior of the venue, too. Yamaha Installation Series Speakers are available in black or white, featuring a durable textured paint. But if basic black or white doesn't suit your visual requirements, they can be easily repainted as required.
   

Yamaha IF2112M/64

Grille & Logo
Extremely rugged 14-gauge steel grills with a 63% aperture ratio protect your speakers without detracting from their sonic performance in any way. An acoustically transparent foam is located behind the grilles for a smart, unobtrusive looks without degraded sound. The logo plate can easily be rotated to match the speaker's orientation, or removed completely.
   

Yamaha IF2112M/64

Connectors & Mode Selectors
To match the widest possible range of systems and wiring arrangements, Yamaha Installation Series Speakers feature parallel-connected barrier-strip and Neutrik NL4 connectors (NL8 on 3-way models). The IF2112/AS, IF2115/AS, IF2108, and IF2208 models feature an additional Neutrik NL4 connector - 1 barrier strip + 2 Neutrik NL4 connectors - to facilitate wiring in monitor applications. 12-inch and 15-inch 2-way models have a selector on the rear panel that allows easy switching between bi-amp and single-amplifier drive modes. The 8-inch and 5-inch models are designed for single-amp use only. 3-way models allow switching between tri-amp and bi-amp modes. Dual-woofer subwoofers also allow switching between parallel and discrete modes for maximum system compatibility and flexibility. All mode switches are recessed to prevent inadvertent operation.
   

Yamaha IF2112M/64

Pole Mount Sockets & Handles
Since the "multi-angle" IF2112/AS, IF2115/AS, IF2108, and IF2208 models are likely to be used for floor monitoring or other applications that require maximum portability, they are equipped with handles that make moving them about comfortable and easy. They also feature pole-mount sockets so they can be easily pole mounted wherever you need extra monitor or fill sound.
   

Yamaha IF2112M/64

Rigging
Multiple M10 rigging points are provided for shoulder eye bolts or optional U-brackets. Four eye bolts are supplied with each speaker. All hardware is industry-standard, and is compatible with third-party mounting accessories. Horizontal and vertical array frames are available in black or white to match the standard speaker finishes.
   

Yamaha IF2112M/64

Shape
In addition to having a significant effect on a speaker's sound, the shape of its cabinet is an important factor for handling and setup versatility. The IF2112/AS, IF2115/AS, IF2108, and IF2208 models feature a "multi-angle" design that allows them to be used as floor monitors as well as for house sound. The IF2205 features a compact "stair-step" configuration. All other full-range cabs have a 30º trapezoidal shape that results in minimum interference when the speakers are combined in arrays.
Speaker type High power 2-way full-range speaker
Frequency range (-10dB) 55Hz-20kHz (Bi-amp mode)
Frequency response (-3dB) 60Hz-20kHz (Bi-amp mode)
Nominal coverage H 60 or 40
V 40 or 60
Components LF 12" (30cm) woofer, 3" (76mm) voice coil
HF Rotatable constant directivity horn, 1.4" (36mm) exit, 1.7" (44mm) voice coil compression driver
Drive mode options (*default) Passive* / Bi-amp
Power rating NOISE 350W (IEC, 2h)
PGM 700W
PEAK 1400W
Nominal impedance 8ohms
SPL Sensitivity (1W; 1m on axis) 95dB SPL
Continuous (Calculated) 120dB SPL
Peak (Calculated) 126dB SPL
I/O connectors 1x Neutrik NL4 and barrier strip, wired in parallel
Shape 30 degrees trapezoidal
Cabinet material 5/8" (16mm), 11-ply Finnish birch
Finish Textured black
Handle 2
Flying and mounting hardware 15x M10 for shoulder eyebolts and U-bracket; 4x M8 for 3rd party speaker mount hardware
Dimensions W 378mm; 14-7/8in
H 695mm; 27-3/8in
D 454mm; 17-7/8in
Net weight 28kg; 61.7lbs

 

Yamaha ProAudio
Mixers
Processors
Power Amps
Speakers
Loudspeakers
CBR 10 IF2115M/64
CBR 12 IF2115M/95
CBR 15 IF2115M/99
BR 10 IF3115/64
BR 12 IF3115/95

BR 12M

IH2000/64
BR 15 IH2000/95
BR 15M IL1115
IF2205 IS1118
IF2108 IS1215
IF2208 IS1218
IF2112/64 S112V
IF2112/95 S115V
IF2112/99 S215V
IF2112/AS SM10V
IF2112M/64 SM12V
IF2112M/95 SM15V
IF2112M/99 SW115V
IF2115/64 SW118V
IF2115/95 CW118V
IF2115/99 SM218V
IF2115/AS  
Surface Mount Speakers
VS6 VXS10S / VXS10SW
VS4 VXS10ST / VXS10STW
VXS5 / VXS5W VXS5-VA / VXS5-VAW
 VXS8  / VXS8W VXS8-VA  / VXS8-VAW
Ceiling Speakers
VXC4 / VXC4W VXC6-VA / VXC6-VAW
VXC6 / VXC6W VXC8-VA / VXC8-VAW
VXC8 / VXC8W VXC5F / VXC5FW
 VXC4-VA / VXC4-VAW VXC3F / VXC3FW
Ceiling Speakers
DSR215 DBR12
DSR118W DBR15
DSR115 DXS12
DSR112 DXS15
DXR8 MSR400
DXR10 MSR250
DXR12 MSR100
DXR15 MSR800W
DBR10  
Powered Monitor Speakers
MSP7 STUDIO HS 8
MSP5 STUDIO HS 8S
SW10 STUDIO MSP 3
HS 5 MSP101III
HS 7  
DAW Systems
PA Systems
Add-On-Effects
Interfaces
Recorders
Expandore Singapore India Vietnam

Yamaha Professional Audio  Link  Link1  Link2  17032015
Mixers:
RIVAGE PM10 | Digital Mixers | CL1 | CL3 | CL5 | QL-1 | QL-5 | PM5D | PM5D-RH | M7CL-32 | M7CL-48 | M7CL-48ES | LS9-32 | LS9-16 | DM2000VCM | DM1000VCM | 02R96VCM |
01V96i | IMX644 |
Analog  Mixers | MGP32X | MGP24X | MGP16X | MGP12X | MG20XU | MG16XU | MG12XU | MG10XU | MG06X | MG20 | MG16 | MG12 | MG10 | MG06 | AG06 | AG03 | MG32/14FX |
MG24/14FX | MG206C-USB | MG166CX-USB | MG166C-USB | MG166CX | MG124CX | MG82CX | MG206C | MG166C | MG124C | MG102C |
Powered Mixers | EMX5016CF | EMX5014C |
EMX512SC | EMX312SC | EMX212S |

Processors: DME-64N | DME-24N | DME8i-C | DME8i-ES | DME8o-C | DME8o-ES | DME4io-C | DME4io-ES | MTX-3 | MTX5-D | SP2060 | SPX2000 | Q2031B |
Power Amps: TX6n | TX5n | TX4n | T5n | T4n | T3n | PC9501N | PC6501N | PC4801N | PC3301N | PC2001N | XP7000 | XP5000 | XP3500 | XP2500 | XP1000 | P7000S | P5000S | P3500S | P2500S |
MA2030 | PA2030 | XMV4280 | XMV4140 | XMV4280-D | XMV4140-D | XM4180 | XM4080 | IPA8200 | XH200 |

Speakers: CBR 10 | CBR 12 | CBR 15 | BR 10 | BR 12 | BR 12M | BR 15 | BR 15M | IF2205 | IF2108 | IF2208 | IF2112/64 | IF2112/95 | IF2112/99 | IF2112/AS | IF2112M/64 | IF2112M/95 | IF2112M/99 |
IF2115/64 |IF2115/95 | IF2115/99 | IF2115/AS | IF2115M/64 | IF2115M/95 | IF2115M/99 | IF3115/64 | IF3115/95 | IH2000/64 | IH2000/95 | IL1115 | IS1118 | IS1215 | IS1218 | S112V | S115V | S215V | SM10V | SM12V | SM15V | SW115V | SW118V | CW118V | SM218V  |
VS6 | VS4 | VXS5 / VXS5.W | VXS8  / VXS8W | VXS10S / VXS10SW | VXS10ST / VXS10STW | VXS5-VA / VXS5-VAW |VXS8-VA  / VXS8-VAW |
VXC4 / VXC4W | VXC6 / VXC6W | VXC8 / VXC8W |
VXC4-VA / VXC4-VAW | VXC6-VA / VXC6-VAW | VXC8-VA / VXC8-VAW | VXC5F / VXC5FW | VXC3F / VXC3FW | DSR215 | DSR118W | DSR115 |
DSR112 | DXR8 | DXR10 | DXR12 | DXR15 | DBR10 | DBR12 | DBR15 | DXS12 | DXS15 | MSR400 | MSR250 | MSR100 | MSR800W | MSP7 STUDIO | MSP5 STUDIO | SW10 STUDIO | HS 5 | HS 7 | HS 8 | HS 8S |
MSP 3 | MSP101II |
DAW Systems:
NCS500-FD | NCS500-CT | NUAGE I/O | NUAGE WORKSPACE | DANTE ACCELERATOR |
PA Systems: Stagepas 600i | Stagepas 400i |
Add-On-Effects: AE011 | AE021 | AE031 | AE041 | AE051 |
Interfaces: MY8-LAKE | DUGAN-MY16 | WSG-Y16 | MY4-AEC | MY8-ADDA96 | MY8-AD96 | MY8-AD24 | MY4-AD | MY8-DA96 | MY4-DA | MY16-AT | MY8-AT | MY16-AE | MY8-AE96 | MY8-AE96S |
MY8-AE | MY8-AEB | MY16-MD64 | MY8-SDI-D | MY8-SDI-ED | MY16-TD | MY8-TD | AVIOM16/o-Y1 | AVIOM6416Y2 | MY16-CII | MY16-ES64 | MY16-EX |
Recorders:
CD-S300RK | CD-C600RK | POCKETRAK PR7 | POCKETRAK C24 | POCKETRAK W24 |