Audio Technica AE3300 Cardioid Condenser Handheld Microphone
Product Code: AE3300
Features
• Exceptional performance for exceptional performers
• Same element as the classic AT4033 studio microphone
• Well-tempered polar pattern with outstanding rejection qualities
• Superior anti-shock engineering
• Robust all-metal design for enduring dependability on the road
• Integral 80 Hz HPF switch and 10 dB pad
With pristine audio quality, ultra-low handling noise, and high-frequency clarity, Audio-Technica’s AE3300 gives voice to the subtleties of vocal
performance. This cardioid condenser vocal microphone features the condenser element used in the legendary AT4033 and proven in the world’s finest recording studios. The hardened-steel outer grille is
lined with fine steel mesh and a layer of open-cell foam for ultimate protection against vocal plosives without compromising high-frequency clarity. Its superior anti-shock engineering ensures low handling
noise and quiet performance. For exceptional performance. For exacting detail. For brilliant clarity: AE3300. It’s the new standard in live audio. |
| Element |
Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern |
Cardioid |
| Frequency Response |
30 - 18,000 Hz |
| Open Circuit Sensitivity |
–42 dB (7.9 mV) re 1V at 1 Pa |
| Impedance |
150 ohms |
| Maximum Input Sound Level |
147 dB SPL, 1 kHz at 1% T.H.D.; 157 dB SPL, with 10 dB pad (nominal) |
| Low Frequencey Roll Off |
80 Hz, 12 dB/octave |
| Dynamci Range |
128 dB, 1 kHz at Max SPL |
| Signal to Noise Ratio |
75 dB, 1 kHz at 1 Pa |
| Phantom Power Reqirements |
11-52V DC, 3 mA typical |
| Weight |
300 g |
| Dimensions |
7.05" (179.0 mm) long, 1.97" (50.0 mm) head diameter, 1.30" to 0.87" (33.0 mm to 22.0 mm) tapered body diameter |
| Output Connector |
Integral 3-pin XLRM-type |
| Accessories |
AT8470 Quiet-Flex® stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
|
|
