The
LMD-1530W incorporates a 15:9 aspect ratio, WXGA (1280 x 768
pixels) LCD panel, and an HDMI interface - in addition to the
features offered by the current LMD-1420 SD monitor. It also comes
in an almost equivalent size, both in height and width, as to the
popular LMD-1420 and LMD-1410 SD monitors.
Where smooth migration from the LMD-1420 or LMD-1410 to HD picture
monitoring is desired, the LMD-1530W is an ideal choice in terms of
product features, operational usability, installation convenience,
as well as picture quality.
Features of LMD-1530W
High Resolution Panel (WXGA)
15.3-inch*, 15:9 aspect ratio, WXGA
(1280 x 768 pixels) LCD panel.
*15.3 inch viewable area measured diagonally
Input Versatility
The LMD-1530W comes equipped with a
full range of analogue SD inputs such as composite NTSC and PAL,
Y/C (S-Video), and 525i/625i component and RGB. In addition, the
LMD-1530W handles SD-SDI input by using the optional BKM-320D
SD-SDI input adaptor. The LMD-1530W can accept HD signal via HDMI
and analogue component interface, and DVI signals via HDMI
interface*.
*A DVI conversion cable is required.
High Purity Colour Filters
The LMD-1530W comes equipped with
high-purity RGB colour filters, allowing the reproduction of
colours with stunning depth and saturation.
Excellent Brightness and
Contrast
The LMD-1530W provides
high-brightness, high-contrast images thanks to their wide aperture
LCD panels. In addition, the use of precisely manufactured RGB
colour filters allows the LMD-1530W to reproduce colours with
stunning depth and saturation - creating highly natural images.
Wide Viewing Angle
The LCD panel used in the LMD-1530W
provides a wide viewing angle of 176 degrees, both horizontally and
vertically, with minimal reduction in picture contrast. This allows
images to be viewed from various positions and angles.
Advanced Marker Settings
The LMD-1530W can display various
area markers, including a centre marker and aspect markers. The
brightness of these markers can be selected from three different
levels: white, grey, and dark grey. Users can also select either a
black or gray matte to fill the outer area of the aspect markers.
These flexible marker controls, together with the choice of many
different aspect markers, make the LMD-1530W extremely convenient
display devices for a variety of shooting scenarios.
Colour Temperature/Gamma
Selection
Users can select from high, low, or
preset colour temperatures. A variety of gamma modes can also be
selected.
Selectable Scan Size for Video Input
and Aspect Ratio
The scan size can be selected from 5%
over-scan and -3% under-scan modes. The aspect ratio can be
switched between 16:9 and 4:3 according to the input signal.
Three-colour Tally
The LMD-1530W comes equipped with a
tally lamp that can be lit via a parallel remote connector. The
status of the signal displayed on the monitor can be identified by
the tally colour: red, green, or amber.
Parallel Remote Control
The LMD-1530W can be controlled
remotely via their parallel remote connectors. In the remote menu,
there are 17 functions (such as the ability to switch input
signals), of which seven can be allocated to the remote
connector.
Monaural Audio Monitoring
The LMD-1530W is equipped with a
speaker (0.5 W), which enables the user to monitor audio.
Protected Controls
The key-inhibit function helps
prevent inadvertent operation from the control panel.
4:3/16:9 Switchable Display
The scan aspect ratio can be switched
between 4:3 and 16:9.
Mountable in a 19-inch EIA Standard
Rack
The LMD-1530W (7U-high) can be
mounted in a 19-inch EIA standard rack using optional MB-533
Mounting Bracket.
VESA Mounting
The LMD-1530W can easily be mounted
(100 x 100 mm pitch) on a wall or ceiling.
|
