The SmallHD 1303HDR display size, resolution, and pixel density of the 1303 production monitor make it an invaluable tool for precision focus pulling. When you don't have the time or proper
measurements, a razor-sharp, low latency display will help you hit your marks.
Preview what you're sending downstream using the Output Preview Page, while utilizing software features like customizable
focus assist and peaking on your 1303 monitor. If it's the only monitor near by, its color accuracy (100% REC 709) and broad viewing angle make it easy to share with clients and directors.
With a panel roughly 3x brighter than most production monitors, the SmallHD 1303HDR is not restrained by ambient light. Its optically bonded LCD combats glare and sunlight, allowing you to pull focus in less than ideal shooting
environments.
Power options for the SmallHD 1303HDR monitor are simple and convenient. The 2-pin LEMO out allows for a seamless integration with accessories such as the Teradek Bolt wireless receiver.
All
SmallHD® production monitors are equipped with the Rapid Rail Mounting System; the simplest way to connect, store, and travel with critical monitor accessories.
Transitioning from table to
C-Stand happens safely and securely with the 1303's VESA compatible mounting accessory.
The SmallHD 1303HDR monitor is the perfect blend of functionality and portability. With a razor-sharp display and a rugged
build quality, the 1303 will boldly go where no other production monitor has ever gone before.
|
| Panel Type |
IPS |
| Size Diagonal |
13 |
| Resolution |
1920x1080 |
| Pixel Density (PPI) |
170 PPI |
| Aspect Ratio |
16:9 |
| Active Area |
11.59” x 6.52” |
| Brightness |
1500 nits |
| Contrast |
1140:1 |
| Color Gamut |
100% Rec.709 |
| Color Depth |
10 bit |
| Viewing Angle |
178 Deg. |
| Backlight Type |
LED |
| Adjustable Backlight |
Yes |
| Temperature Adaptive Color |
No |
| Input Signal Types/Formats |
| 3G-SDI |
YCC 4:2:2 @ 10 bits: 1080p60, 1080p59.94, 1080p50, 1080i120, 1080i119.88, 1080i100 |
| HD-SDI |
YCC 4:2:2 @ 10 bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psF30, 1080psF29.97, 1080psF25, 1080psF24, 1080psF23.98, 1080i60, 1080i59.94,
1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98 |
| SD-SDI |
480i29.97, 576i25 |
HDMI
|
Supports YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98,1080i120,
1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60,
480p59.94, 576p100, 576p50 |
| Component |
Not Supported |
| Composite |
Not Supported |
| Audio |
HDMI & SDI Monitor through Speakers in Front Bezel or through Headphone Jack Metering up to 8 channels |
Output Signal Types/Formats
|
| 3G-SDI |
YCC 4:2:2 @ 10 bits: 1080p60, 1080p59.94, 1080p50, 1080i120, 1080i119.88, |
| HD-SDI |
YCC 4:2:2 @ 10 bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94,
1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98 all at 8 bits |
| SD-SDI |
Not Supported |
HDMI
|
Supports YCC 4:2:2@ 8 bits, RGB & YCC 4:4:4 @ 8 bits: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i120,
1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60,
480p59.94, 576p100, 576p50, 480i120, 480i119.88, 480i60, 480i59.94, 576i100, 576i50 |
| Component |
Not Supported |
| Composite |
Not Supported |
| Audio |
Audio sent downstream unless a LUT is loaded on the output page which disables Audio out. |
| Connector Type |
| SDI |
2x 3G Inputs, 2x 3G Outputs |
| HDMI |
1x Input, 1x Output |
| Component |
Not Supported |
| Composite |
Not Supported |
| Audio |
1x Headphone Jack on Front of Monitor |
| Power In |
1x XLR 4pin Input 12-34VDC, 1x Lemo Output 12VDC @ 4A Max |
| Power Out |
1x XLR 4pin Input 12-34VDC, 1x Lemo Output 12VDC @ 4A Max |
| USB |
1x Front USB2, 2x Rear USB2 |
| Controls |
| Primary Control Interface |
Joystick Navigation, Dedicated Back Button. Additional Dedicated buttons for: Image Capture; LUT Selection; Backlight Level; Input Selection; Scopes Toggle. |
| Record/Capture |
Dedicated Image Capture Button on Front Bezel |
| User Defined Functions |
N/A |
| RF Wireless Remote / External Control |
N/A |
| USB Remote / External Control |
N/A |
| Data I/O |
| Storage |
SD Card for LUTs, Captured Images, Image Overlays, Profile Saving & Loading, Firmware Upgrades |
| USB |
1 Front & 2 Rear USB Ports for power (1.5A shared total), LUT Loading, Profile Saving & Loading |
| Wireless |
N/A |
| Wifi |
N/A |
| Power |
| Connector Type |
1x XLR 4-pin 12 - 34VDC IN; 12V Lemo 2-pin OUT 4A Max |
| Voltage |
12 - 34VDC |
| Power Consumption |
25 - 39W |
| Recommended Power Supply |
AC - DC Power Converter “Brick” Included with Monitor 110 - 240VAC 50 - 60 HZ INPUT; 15V - 6A OUTPUT |
| Battery Types |
Gold Mount / VMount via 4pin XLR Connector |
| Output Voltage (VDC) |
12V, 2A max via LEMO Connector |
| Environmental |
| Compliance |
FCC, IC, CE, RoHS |
| Operating Temperature |
32F - 100F |
| Storage Temperature |
33F - 115F |
| Screen Protection |
Acrylic or Anti-Reflective Acrylic screen protetor available as an option |
| Weight (Item Only without battery) |
128oz (3628.74g) |
| Weight (Packaged) |
12lb (5.44kg) |
| Mount Points |
2x ¼”-20 on Top, Left & Right sides; RapidRail - Cold Shoe style rails on rear of monitor |
|
|
