Digital and analog Inputs The Roland XS-83H has eight video inputs. In addition to the HDMI port which can pass DVI signals, the series also enables switching for all analog
signal formats including RGB, component, composite and S-video.
EDID emulation The Roland XS-83H features EDID emulation for HDMI and RGB signals, managing EDID information between the display and
HDMI source to ensure a stable system environment for HDMI. Near instant video switching is possible within 0.2 seconds even with HDCP enabled.
Video signals can be flipped vertically and horizontally, or rotated 90 degrees Using this in combination with the built-in scaling makes creative cropping and orienting of the video possible.
Switching and mixing of audio inputs with EQ and dynamics The Roland XS-83H internal audio mixer enables switching and mixing of audio inputs with EQ and dynamics processing on every input. Audio mixes can be created from both analog audio inputs as well as embedded HDMI
audio inputs. The resultant mix can be embedded back into the HDMI/HDBaseT output as well as analog audio outputs.
Compositing and multi-screen The internal scalers enable the
Roland XS-83H to scale individual HDMI, HD component , RGB, composite and S-video inputs and mix inputs of different resolutions to a common output. Each output can be in their respective format and display.
Resolutions up to WUXGA/1080p Roland XS-83H Resolutions up to WUXGA/1080p are supported for both input and output. Deinterlacing interlaced video for output as a progressive signal is also possible.
Video processing The series features video processor which enables the composition of the video signal and split-picture in a numerous number of productions. Dissolving transition is possible in Version
2.0. *Output format cannot be changed separately when using the composition function.
All the outputs accommodate HDMI and HDBaseT Video and Audio signals can be transmitted over a long distance by
a LAN cable. *Please access the website of the XS series in order to see more connecting verification information of HDBaseT.
Sophisticated sound processing The Roland XS-83H internal 16ch stereo digital
audio mixer enables sophisticated sound processing. Along with eight stereo HDMI audio inputs the series can also accept eight stereo analog audio inputs. Each of the inputs can be mixed separately.
Digital audio mixer with various functions Each audio input has an internal high-pass filter, 4-band equalizer, noise gate and compressor. Audio follows video capabilities are also available enabling audio switching
coordinated with video switching. Each audio output has a 4-band equalizer, gate, compressor and delay for proper lip-sync. It also features down-mixing function which makes output to a ceiling speaker
possible.
The XS series accommodates mic level audio inputs A Roland XS-83H internal ducking function enables the ability to have the mic level automatically mixed above any other audio input.
Wireless control from an iPad Roland XS-83H Using the optional wireless LAN adapter enables direct control from an iPad installed with the dedicated XS-80 Remote app. Along with operating the unit, XS-80 Remote can be used to change
settings instantly with its memory-recall function. The operation menu can also be customized by changing the layout, tab names, preset names and channel names or the background picture.
Control preset change, video switching and audio level control.
Digital audio effects The Roland XS-83H is equipped with high quality audio effects. Built-in equalizers are included to balance frequencies
and eliminate feedback. Each input has a compressor which enables ducking and a lip-sync delay.
High-speed HDMI switching All HDMI inputs and outputs and HDBaseT
outputs support HDCP. The Roland XS-83H can switch HDCP protected video at an extremely fast speed of less than 0.2 seconds thanks to the XS series advanced HDCP key management.
HDBaseT outputs The XS series include both HDMI and HDBaseT outputs. When using a LAN cable, up to WUXGA/ 1080p video signal can be transmitted up to 100meters. HDBaseT is a connectivity technology established by the HDBaseT Alliance.
HDBaseT enables uncompressed HD video and digital audio signal to be transmitted over a LAN cable. Use of a shielded Cat5e LAN cable is recommended. Transmission distance
depends on the quality of the cable.
Video |
Processing |
4:4:4 (Y/Pb/Pr), 10-bit |
Input Connectors |
HDMI : Type A (19 pin) x 8 (Input 1 to 8) *HDCP supported RGB/Component/S-video/Composite : HD DB-15 type x 8 (Input 1 to 8) |
Output Connectors |
HDMI : Type A (19 pin) x 3 (Output 1 to 3) HDBaseT : RJ-45 x 3 (Output 1 to 3) *HDCP supported |
Input/Output Level and Impedance |
RGB/Component Level : 1.0Vp-p (luminance), 0.286Vp-p (chroma, NTSC), 0.3Vp-p (chroma, PAL) Impedance : 75
ohms
Composite/S-video Level : 1.0Vp-p (luminance), 0.286Vp-p (chroma, NTSC), 0.3Vp-p (chroma, PAL) Impedance : 75 ohms |
Input Supported Formats |
HDMI : up to 1080p/59.94, up to 1920x1200/60 Component : up to 1080p/59.94 RGB : up to 1920x1200/60 *Reduced
Blanking Composite : 480i/59.94, 576i/50 S-video 480i/59.94, 576i/50 Still Image: Windows® Bitmap File (.bmp) * Maximum 1920 x 1200 pixels, 24 bit per pixel, uncompressed |
Output Supported Formats |
HDMI/HDBaseT: 480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i, 1080/59.94p, 1080/50p,
640 x 480/60 Hz, 800 x 600/60 Hz, 1024 x 768/60 Hz, 1280 x 768/60 Hz, 1280 x 1024/60 Hz, 1366 x 768/60 Hz, 1600 x 1200/60 Hz, 1920 x 1200/60 Hz * The output refresh rates of
640 x 480–1366 x 768 are 75 Hz when the unit’s frame rate setting is 50 Hz. * Conforms to VESA DMT Version 1.0 Revision 11. * 1920 x 1200/60 Hz: Reduced blanking |
Effects |
Transition : Cut Composition : PinP Others : Vertically flip, Horizontally flip, Rotated 90 degrees |
Audio |
Audio Processing |
Sampling Rate : 24-bit/48 kHz |
Input Connectors |
Digital : HDMI Type A (19 pin) x 8 Analog : 5 pin terminal block connector x 8 |
Output Connectors |
Digital : HDMI Type A (19 pin) x 3 Analog : 5 pin terminal block connector x 3 |
Input Level and Impedance |
Ch 1 to 2 : -60 to +4dBu (Maximum: +22 dBu), 10k ohms (Gain 0 to 23 dBu), 5k ohms (Gain 24 to 64 dBu) Ch 3 to 8 : +4dBu (Maximum: +22 dBu), 8.5k ohms |
Output Level and Impedance |
Ch 1 to 4 : +4dBu (Maximum: +22 dBu), 600 ohms |
Audio Formats |
HDMI : Linear PCM, 24bit, 48kHz, 8ch |
Audio Effects |
Input : High-pass filter, 4-band equalizer, Gate/Expander, Compressor Output : 4-band equalizer, Gate/Compressor, Delay |
Other Connectors |
RS-232C : D-Sub 9 pin type x 1 LAN : RJ-45 x 1 USB : A Type x 2 for USB memory, for WNA-1100RL |
Display |
2 color LCD 128 x 64 dots |
Others |
Power Supply |
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz) |
Power Consumption |
50w |
Accessories |
Power Cord, Captive Screw Connectors, Rubber Foots, Owner’s Manual |
|