DXA-SLR PRO

 DXA-SLR PRO

BeachTek XLR Adapter with Built-in Preamplifiers for HDSLR Cameras

Beachtek DXA-SLR Pro

>Home > Main > DSLR Camera Adapters > DXA-SLR PRO email uscontact us

PRODUCTS

HDSLR Adapters

DXA-SLR ULTRA

DXA-SLR PURE

DXA-CONNECT

DXA-BMD

DXA-SLR PRO

DXA-SLR MINI
DXA-5Da
Camcorder XLR Adapters
MCC-2
DXA-2T
DXA-HDV
Accessories
KAMKIT
MultiMount-5D
RB2T
Cables
Battery

DXA-SLR PRO - XLR Adapter with Built-in Preamplifiers for HDSLR Cameras

     

Beachtek DXA-SLR Pro
Model: DXASLRPRO
Buy Sell Sales BeachTek DXA-SLR Pro

 

Beachtek DXA-SLR Pro

 
DXA-SLR PRO Features


The new DXA-SLRPRO features two XLR inputs with phantom power that you can switch to accept mic or line-level signals. It has a 3.5mm headphone output with a dedicated volume knob, and the ability to disable a camera’s AGC.The DXA-SLR PRO features VU meters to easily check for proper recording levels.


Active XLR adapter with built-in preamplifiers and phantom power for connecting professional audio gear to any DSLR camera that has a mic jack.
Exceptionally low noise preamplifiers provide 15dB of gain for clean clear audio. Works with virtually any microphone, wireless device or mixing board.
The DXA-SLR PRO gives you everything you need to connect professional audio gear to your camera to capture superb sound. The DXA-SLRPRO is very easy to set up and use. The Good/Peak signal indicators show the ideal input levels at a glance while the headphone output lets you monitor what you are recording. The enhanced AGC Disable feature works even better at controlling the wild swings of the Auto Gain Control that plague most cameras. This dramatically reduce the noise during quiet moments of recording allowing you to record two channels of clean audio. You can also monitor the playback audio from the camera. Fits neatly under any camera and can also be mounted to a tripod. Operates on one 9 volt battery.
 

 

Specifications

Inputs 2 x XLR, 1 x 3.5mm monitor input
Outputs 1 x 3.5 mm camera output, 1 x 3.5 mm headphone output
Maximum Input Levels Mic: -3 dBu, Line: +14 dBu
Output Level Nominal mic levels
Frequency Response 20 Hz to 20 kHz (+/- 0.5 dB)
THD Less than 0.01% @ 1 kHz, -30 dBu input
S/N Ratio 85 dB @ 1 kHz, -30 dBu input
Gain Lo gain: 0 dB, Hi gain: 15 dB
Phantom Power Dual regulated 12 or 48 volt, current to 14 mA (direct short)
VU Meter -18 to +3 dB in 3 dB increments
Battery Type 1 x 9 volt alkaline or lithium battery
Battery Duration 3 hours with alkaline (no phantom), 8 hours with lithium (no phantom)
Dimensions 6 x 3.75 x 1.75" (152 x 95 x 44 mm)
Weight 0.51 kg
 
backtotop_button  

Read our blogs