 |
 |
 |
Product Code: UNIPAC
Discontinued |
Product Code: QRQUADPT
 |
Product Code: Product Code: QBHHD
|
|
UniPac |
QR-QUAD PT |
QBH-HD |
|
Consists of an
Anton/Bauer Gold Mount with integral belt loops and a 5 ft. power cable with a
standard 4-pin XLR connector. The UniPac allows any Logic Series Battery to
power any piece of portable 12-17 volt accessory with a standard 4-pin XLR DC
input. Additionally, in cold climates or in tight spaces, the UniPac allows the
battery to be removed from the rear of the camera and worn around waist or
placed in some other appropriate place.
|
|
| Sandwich adapter with four
PowerTap connectors allows you to power four accessories, such as lighting,
wireless receivers, hard drives, onboard monitors, etc. Contains external
replacement fuse. Maximum total draw is 10 amps. |
|
| An accessory for the video/film
dual voltage world which uses four of the same type of Logic Series Batteries.
QBH-HD features (3) three 4p XLR outputs @ 14.4 volts and (1) single 2-pin
Amphenol output @ 28.8 volts. 10 amp externally replaceable fuse. |
|
 |
 |
 |
Product Code: SOXLR
|
Product Code: DBH30
|
Product Code: QRLOCASTER
|
|
SO-XLR |
DBH-30 |
QR-LoCaster |
|
Adapts any Gold
Mount to accept a standard 4 pin XLR connector. Ideal when powering a camera
from a secondary source and wanting to use the functions of the PowerTap
connectors simultaneously with the camera.
|
|
This 30V battery holder is
ideal for ENG and EFP Lighting Kits and features:
· 2 Gold Mounts® for secure fit and seamless power
· Ability to power HMI/LED lights that run at 28V (actual battery range is
22-35Vdc)
· Lightweight configuration when using 2 DIONIC® series batteries
· Ample power for 400w lights using 2 DBH 30V
· 2-pin Amphenol connector, standard for HMI lighting |
|
|
Gold Mount for ARRI
LoCaster Light
|
|
 |
 |
 |
Product Code: QRCHILIO
|
Product Code: QRCMBPA
|
Product Code: Product Code:
QRDP800
|
|
QRC-Hilio |
QRC-MBPA |
QR-DP800 |
|
The QRC-HILIO is
designed to power Litepanels Hilio™ LED fixture when DC power is essential. The
QRC-HILIO allows for two Anton/Bauer Logic Series® batteries to be snapped onto
the back of the Hilio providing a convenient, lightweight, field lighting kit.
As an added benefit, our integrated hot swap feature provides uninterrupted
lighting throughout the production day.
|
|
| This Gold Mount works with
MacBook™ laptops using the Magsafe™ power adapter (sold separately). It
eliminates the need for additional extended life batteries for your laptop by
using your existing Anton/Bauer inventory. Ideal for editing in the field. |
|
| Gold Mount for Panasonic DVC
PRO and P2 cameras. |
|
 |
 |
 |
Product Code: QRVESA
|
Product Code: QRHOTSWAPGM
|
Product Code: QRCBMD
|
|
QRC-VESA |
QR-HOTSWAP-GM |
QRC-BMD |
|
Gold Mount which
attaches to the standard VESA mounting pattern with 4p XLR connector.
|
|
|
QR-HOTSWAP-GM allow
for true "hot swapping" as either battery can be changed at any time. The
circuitry automatically combines the output of both digital battery fuel gauges
for accurate display in the cameras with the InterActive viewfinder features.
Used with two DIONIC 90 or HC batteries, the lightweight (<13 oz/360g)
QR-HOTSWAP-GM allows for a maximum 248 watt hours of capacity and seamless,
truly perpetual power
|
|
|
The QRC-BMD
provides the convenience of powering the Blackmagic Cinema Camera as well as
having 2 PowerTap® outputs for powering accessories such as monitors and
recorders. This helps simplify on-set battery management and allows for a truly
hot swappable power solution utilizing the internal camera battery.
|
|
 |
|
 |
Product Code: QRDSLR
|
Product Code: QRCLG
|
Product Code: QRCBMURSA
|
|
QR-DSLR |
QRC-LG |
QRC-BMURSA |
|
The QR-DSLR Gold
Mount® provides 7.2V power to the camera via the Canon DR-E6 Coupler*, and 14.4V
power via the PowerTap for accessories such as the on-camera Ultralight 2,
on-board monitors, and external hard drives. Wear it as a pouch pack, or attach
it to a third party shoulder support systems. Used with a shoulder support
system, Anton/Bauer batteries offer an excellent counter balance
|
|
|
The QRC-LG Gold
Mount® provides flexibility and added convenience to the Litepanels® Sola ENG
Flight Kit. Integrated into the Gold Mount design is the Manfrotto™ Mini Clamp
which allows the QRC-LG to be mounted to a variety of lighting stands. The
QRC-LG has three PowerTap® outputs giving the entire Sola ENG Flight Kit the
ability to be powered from one Anton/Bauer Logic Series® Battery, making the
QRC-LG a truly portable lighting system.
|
|
The QRC-BM URSA
Gold Mount® installs quickly on the Blackmagic Design URSA camera. It will
specifically handle the URSA’s 12V input power requirement and has a single
PowerTap® located on the toggle switch side. For use with Anton/Bauer DIGITAL
and Logic Series® batteries. |
