| The Anton/Bauer
Elipz System -
Also
please remember to select your Cable
Adapter |
|
|
|
|
|
ELIPZ 10K
PACKAGE:
(1) ELIPZ
10k battery
(1) ELIPZ charger
|
EGRIPZ HANDHELD
CAMERA SUPPORT
Specification
|
ElightZ
6-VOLT ON-CAMERA LIGHT
Specification
|
ELIPZ SYSTEM
PACKAGE:
(1) ELIPZ
10k battery ,
(1) ELIPZ charger
(1) ElightZ,
(1)
EgripZ &
(1) Cable
|
| Discontinued |
Discontinued |
Discontinued |
Discontinued |
| |
|
|
|
| Chose your
Elipz Cable Adapter
here |
|
|
|
Cameras
Makers |
Type of
Cameras |
Elipz Cable Apater
model |
|
| Sony |
Sony
PD-100/150/170, DCRVX2000/2100, HDR-FX1 |
SI-ADP-ELPZ. |
Discontinued |
| Sony |
Sony
HVR-ZI |
SH-ADP-ELPZ. |
Discontinued |
| Panasonic |
Panasonic AGHVX200, AGDVX100/100A/100B,
DVC80/30 |
PA-ADP-ELPZ |
Discontinued |
| Canon |
Canon
GL1/2, XM2 |
CA-ADP-ELPZ |
Discontinued |
|
|
| |
|
| ELIPZ 10K Battery |
 |
 |
|
The innovative ElipZ
10k brings unmatched power density to handheld 7.2 volt battery
operated cameras. Using the highest capacity lithium ion cells
available, the 75Wh 10k can provide runtimes as much as 2 to 5
times that of the consumer OEM batteries supplied with the cameras.
On a 10 watt camera load, the 10k will run over 7 1/2 hours,
virtually a full shooting day! State indicator LEDs give a simple
and easy to understand and constant indication that the battery has
usable capacity (Blue) or requires charge (yellow).
Constructed of high impact polycarbonate the ELIPZ 10K innovative
under-camera mounting design allows batteries to be easily mounted
and released with one hand. A quick release "shoe" attaches to the
camera and the battery attaches directly and securely to the shoe.
Lowering the center of gravity of the camera and providing an
additional handhold without interfering with the camera operation,
the lightweight ElipZ battery actually improves the comfort and
handling characteristics of the camera. The appropriate adapter
cable connects directly to the camera battery compartment and plugs
into the PowerPlug connector on the ElipZ 10K. The ElipZ 10K mounts
easily to the EgripZ support, or other camera support using the
metal 1/4 20 insert at the bottom of the battery. The unique ElipZ
power connector accepts both the camera adapter plug and the
ElightZ PowerPlug. The 10k is capable at continuous loads of up to
6 amps - more than enough for a camera and light
simultaneously. |
|
ELIPZ 10K
BATTERY
Discontinued
|
ELIPZ 10K BATTERY
:
75Wh lithium ion battery (10,500 mAh @7.2V) - requires one
of the following cables for your specific camera type. 6.4" X 3.2"
X 1.7" (16.3 X 8.0 X 4.3 cm) 1.25lbs (567grams)
|
|
|
ELIPZ cable adapter
Discontinued
|
ELIPZ cable adapters:
Model SI-ADP-ELPZ. ElipZ Adapter for Sony PD-100/150/170,
DCRVX2000/2100, HDR-FX1
Model SH-ADP-ELPZ. Elipz Adapter for Sony HVR-ZI
Model CA-ADP-ELPZ. ElipZ Adapter for Canon GL1/2, XM2
Model PA-ADP-ELPZ. ElipZ Adapter for Panasonic AGHVX200,
AJDVX100/100A/100B, DVC80/30 |
|
|
ELIPZ CHARGER
Discontinued
|
The ElipZ battery
charger weighs only 14 oz yet has the power to charge the ELIPZ 10K
in as little as 6 hours. Simply plug the charger into the PowerPlug
connector on the battery and the charger will automatically begin
its charge routines. LEDs give easy to understand charge mode
indication and features wide range (90-250VAC 50/60 Hz) mains
input. Desktop design allows for easy travel and storage.
Dimensions :
5.4" X 3.1" X 2.2" (13.7 x 7.8 x
5.5 cm) .85 lbs. (385 grams)
|
