|
EW 122 G2, Wireless
Systems - G2 - 100 Series EW122G2 EW-122-G2 EW122-G2
|
|
|
|
Sennheiser Wireless
Microphone Systems EW 122 G2
This 100 Series system is ideal for stage productions and
presentations. The unobtrusive ME 4 clip-on microphone is virtually
invisible and has excellent feedback rejection. The extremely small
SK 100 G2 bodypack transmitter as well as the EM 100 rack-mount
receiver feature 9 frequency banks with 4 frequency presets each
for direct channel selection and are ready for immediate
use.
|
|
FEATURES
|
-
1440 tunable UHF
frequencies for interference-free reception
-
Absolutely reliable
transmission and extended range due to high RF output
power
-
High-quality true
diversity reception
-
Pilot tone squelch
for eliminating RF interference when transmitter is turned
off
-
Automatic frequency
scan feature searches for available frequencies
-
Transmitter and
receiver with rugged metal housings
-
Receiver features
user-friendly menu operation via backlit display
-
Lock function avoids
accidental changing of settings
-
HDX compander for
crystal-clear sound
-
Transmitter and
receiver feature "Low Battery" indicators
-
Mute function for
the transmitter
-
Wide range of
accessories adapts the system to any requirement
|
|
BOX INCLUDES
|
-
1 EM 100 G2
rack-mount receiver
-
1 SK 100 G2 bodypack
transmitter
-
1 ME 4 clip-on
microphone (cardioid)
-
1 NT 2-1 power
supply unit
-
2 telescopic
antennas
-
2 AA
batteries
-
Operating
instructions
|
|
|
|
SPECIFICATIONS
|
| RF Frequency
Range: |
518 - 866
MHz |
| Transmission / Receiving Frequencies: |
1440 |
| Presets: |
4 |
| Switching bandwidth: |
36
MHz |
| Peak
deviation: |
+/- 48
kHz |
| Compander: |
HDX |
| Frequency response
(microphone): |
40 - 18000
Hz |
| Signal-to-noise ration: |
>100 dB (A) |
| THD, total harmonic
distortion: |
<
0.9% |
| In
compliance with: |
ETS
300422, ETS 300445, CE, FCC |
| Antenna
connector: |
2 BNC, 50
Ohm |
| Audio-XLR connector: |
6.3mm |
| Audio output level
(balanced): |
XLR: +18dBu
max |
| Audio
output level (unbalanced): |
Jack:
+12dBu max |
| Power
supply: |
10.5 - 16V
DC |
| Dimensions (Receiver): |
212 x
145 x 38 mm |
| Weight
(Receiver): |
1100g |
| RF
output power: |
30
mW |
| Power
Supply: |
2 x 1.5V battery AA
(Mignon) |
| Operating time (Transmitter): |
> 8
H |
| Input voltage range
: |
mic 1.8V
line 2.4V |
| Dimensions (Transmitter): |
82 x
64 x 24 mm |
| Weight
(transmitter): |
158g |
| Transducer ; Microphone type: |
elektret |
| AF
sensitivity: |
40 mV/Pa |
| Sound
pressure level (SPL): |
120dB
(SPL) max. |
| Pick-up
patter: |
Cardioid |
|
|
|
|
|
