|
Sennheiser HME 26-II
Professional Broadcast headset: Condenser Microphone |
|
Product Code: HME26II
| HME
26-II-600 |
|
Broadcast Headset Condenser Mic Omni, 600 Ohms, w/o
cable |
 |
| HME
26-II-100 |
|
Broadcast Headset Condenser Mic Omni, 100 Ohms, w/o
cable |
|
|
HME 26-II-600(4) |
|
Broadcast Headset Condenser Mic Cardioid, 600 Ohms,
w/o cable |
|
| HME
26-II-100(4)P48 |
|
Broadcast Headset Dyn. Mic, 100 Ohms, w/o cable,
copper straight cable open ended, 2m |
|
|
The HME 26-II models apply to the requirements of
most demanding broadcast applications.
The pre-polarized condenser microphone features brilliant acoustic performance
for crystal clear audio transmission in highest broadcast quality and has an
excellent feedback rejection.
The closed, supra-aural headphones have a high maximum SPL and are equipped with
the ActiveGard©. This limiter can be activated or deactivated.
Features:
Lightweight with extra soft cushions and
excellent wearing comfort
Headphones with very accurate sound reproduction
for professional applications
Microphone for crystal clear audio transmission
in highest broadcast quality
ActiveGard© (on/off switch) for protected hearing
High passive noise attenuation
Reliable performance over long lifetime for safe
investments
Swiveling ear cap allows single sided listening
Microphone can either be worn on right or left
hand side
Modular concept of boom, cable and cushions for
highest flexibility |
|
General |
|
Impedance:
|
HME 26-II-600: 600 Ohm stereo (headphones)
HME 26-II-100: 100 Ohm stereo (headphones)
HME 26-II-600(4): 600 Ohm stereo (headphones)
HME 26-II-100(4)P48: 100 Ohm stereo (headphones) |
|
Characteristic SPL |
HME 26-II-600: 1 kHz, 1 V: 107 dB
HME 26-II-100: 1 kHz, 1 V: 115 dB
HME 26-II-600(4): 1 kHz, 1 V: 107 dB
HME 26-II-100(4)P48: 1 kHz, 1 V: 115 dB |
|
Pick-up pattern |
HME 26-II-600: omnidirectional (BKE 4-2)
HME 26-II-100: omnidirectional (BKE 4-2)
HME 26-II-600(4): cardioid (BKE 4-4)
HME 26-II-100(4)P48: cardioid (BKE 4-4) |
|
Max. Sound pressure level (active) |
HME 26-II-600: ActiveGard switched off: 127 dB at 1
kHz, 200 mW
HME 26-II-100: ActiveGard switched off: 128 dB at 1 kHz, 200 mW
HME 26-II-600(4): ActiveGard switched off: 127 dB at 1 kHz, 200 mW
HME 26-II-100(4)P48: ActiveGard switched off: 128 dB at 1 kHz, 200 mW |
|
Frequency response (microphone): |
40 -
20.000 Hz
|
|
Frequency response (headphones): |
40 - 18.000 Hz |
|
Transducer principle (Microphone): |
pre-polarized condenser microphone |
|
Contact pressure: |
3.9
N |
|
Ear coupling: |
supra-aural |
|
Weight (w/o cable and w/o connector):
|
approx. 205 g
|
|
Min. terminating impedance:
|
4700 Ω
|
|
Storage temperature: |
-55 °C to 70 °C |
|
Operating temperature:
|
-15 °C to 55°C
|
|
Maximum sound pressure level (passiv): |
150 dB; 0,5 % THD |
Output voltage:
|
4 mV / Pa +/- 2,5 dB
|
|
Operating voltage (stand alone): |
5 - 15 V DC
|
|
Transducer principle (headphones): |
dynamic, closed |
What's in the box:
|
1 headset
1 cable clip
1 large headband padding
1 wind and pop screen
1 manual |
|
|
|
|
|
| |
|
|
