Zoom
U-22 features a single high-performance, low-noise mic preamp—the same as H6
Handy Recorders
Product Code:
U-22
Features
• Stereo USB audio interface for PC/Mac/iPhone/iPad
• Connect to iPhone/iPad
with Apple iPad Camera Connection Kit or Lightning-to-USB
• Camera Adapter
(sold separately), plus 2 AA batteries or optional AC adapter for power
•
XLR/TS input with high-performance mic preamp
• High-quality recording and
playback at resolutions up to 24-bit/96 kHz
• Approximately 5 hours of
operation with 2 AA alkaline batteries
• Includes download code for Ableton
Live 9 Lite
• Hi-Z support
• Zero-latency direct monitoring
• Dedicated
RCA L/R and headphone outputs
• Gain control knob for Mic/Hi-Z input
•
+48V phantom power
• Accepts standard AA alkaline or NiMH rechargeable
batteries
The U-22 is the essential mobile recording and
performance interface, with an innovative 2-in/2-out ultra-portable design that
makes it easy to connect to a laptop or iPhone/iPad and create great-sounding
audio anywhere.
The interface features a high-performance, low-noise mic
preamp so you can record vocals, instruments, and more with pristine sound
quality—at resolutions up to 24-bit/96 kHz. The U-22 delivers the same excellent
sound as our U-44 and U-24, with an even more compact form factor.
The
U-22 can be bus-powered via USB and its compact form factor is perfect for use
with a laptop or iPhone/iPad*. The innovative design provides quick access to
connectors, knobs, and controls for effortless setup and operation.
*
Requires 2 AA batteries or optional AC adapter for power, plus an Apple iPad
Camera Connection Kit or Lightning-to-USB Camera Adapter for connection to
iPhone/iPad.
The U-22 features a single high-performance, low-noise mic
preamp—the same as acclaimed H6 Handy Recorders—with less than -120 dBu EIN, as
well as recording and playback at resolutions up to 24-bit/96 kHz. You can also
use the U-22 as a studio-quality headphone amp and listen to your favorite music
in full fidelity.
The U-22’s XLR/TS combo input can be used to record
with a microphone or line-level source, with 48V phantom power, and Hi-Z support
for connecting a guitar or bass. The U-22 is also equipped with a mini stereo
input so you can record an iPad, mixer, or other portable audio device.
*The
U-22 can record one input at a time. When recording from the LINE IN jack, the
XLR/TS combo input is disabled.
The U-22 is the perfect audio companion
for musicians who incorporate digital audio processing or pre-recorded sound
elements into their live performances. Connect your interface to a laptop or
iPhone/iPad, pull up software effects or a looper, and send your processed
signal to a mixer or the house PA via RCA stereo outputs.
|
| ANALOG IN: MIC/HI-Z |
| Connector: |
XLR/TS combo jack
(XLR: 2 hot, TS: TIP hot) |
| Input gain |
0 – 43 dB |
| Input impedance: |
2.6 k Ω (MIC) 484 k Ω (Hi-Z) |
| Maximum input level: |
-0.8 dBu (MIC) /+8.7 dBu (Hi-Z) |
| Phantom power: |
+48V |
| ANALOG IN: LINE IN |
| Connector: |
Stereo mini jack |
| Input impedance: |
22 kΩ |
| Maximum input level: |
+1.0 dBu |
| ANALOG OUT: OUTPUT L/R |
| Connector: |
RCA (coaxial) |
| Maximum output level: |
-0.8 dBu (at 0 dBFS) (into 10 kΩ load) |
| Output impedance: |
1 kΩ |
| ANALOG OUT: PHONES |
|
| Connector: |
Stereo mini jack
10 mW x 2 (into 32 Ω load) |
| Output impedance: |
10 Ω |
| General |
| Frequency characteristics: |
At 44.1 kHz: ±1.5dB: 20 Hz - 20 kHz
At 96 kHz: ±2 dB: 20 Hz
- 40 kHz
|
| Input conversion noise: |
Measured EIN: -120 dB or less (IHF-A)
at 43 dB, 150 Ω
input |
Number of audio recording and
playback channels: |
Recording: 2 channels
Playback: 2 channels |
| Sampling frequencies: |
96 kHz, 88.2 kHz, 48 kHz, 44.1 kHz |
| Bit depth: |
24-bit |
| Interface: |
USB 2.0 |
| Power Source: |
USB bus power (Type B)
Zoom AD-17 (Micro-B)
DC 5V power
supply (Micro-B)
2 AA batteries (About 5 hours continuous operation with
phantom power off) |
| Power consumption: |
5W maximum |
| Dimensions: |
119.2 mm (D) x 91.8 mm (W) x 44.6 mm (H) |
| Weight (main unit only): |
151 g |
| *0dBu=0.775Vrms |
|
| U-22 SYSTEM REQUIREMENTS |
| Windows: |
OS： Windows® 7 SP1 or later / 8.1 / 10 (32bit/64bit)
CPU:
Intel® Core i3 or faster*
USB: USB 3.0/USB 2.0**
* Operation is not
guaranteed with CPUs from Atom, Celeron or Pentium series or CPUs made by AMD.
** Only USB host controllers with Intel Chipsets are supported. Operation is not
guaranteed when used with USB hubs or expansion cards. |
| Mac: |
OS： Mac® OS X 10.9.5 or later / 10.10 / 10.11 / 10.12
CPU:
Intel® Core i3 or faster
USB: USB 3.0/USB 2.0*
* Operation is not
guaranteed when used with USB hubs or expansion cards. |
| iPhone / iPad: |
OS： iOS 7.1 or later
* Requires 2 AA batteries or optional
AC adapter for power, plus an Apple iPad Camera Connection Kit or
Lightning-to-USB Camera Adapter. |
|
• U-22 Audio Interface
• Operation
manual
• Ableton Live 9 Lite software download code
• USB Cable |
|
