|
|
| 588SDX
Microphone |
|
|
Product Code: 588SDX Microphone
|
The Model 588SDX is a ball-type,
dual-impedance, cardioid (unidirectional) dynamic microphone that
provides excellent voice reproduction. Its spherical grille is a
very effective wind and pop filter which is especially good when
used for closeup vocal miking. This microphone is highly suited for
speech or music pickup in schools, churches, and meeting rooms. Its
unidirectional polar pattern greatly reduces feedback problems,
permitting operation closer than usual to loudspeakers without the
annoying squeal or howl caused by feedback. The microphone is
equipped with a lockable ON/OFF switch and an internal impedance
selection socket located on the XLR connector for switching between
high and low impedance. A slip-in swivel adapter is supplied for
the convenience of stand-mounted use.
-
588SDX with
swivel adapter and on-off switch. Cable not
included.
|
|
| Features |
- Controlled low-frequency
response combined with a smooth high-frequency rise for clear and
intelligible voice pickup
- Symmetrical cardioid pickup
pattern minimizes feedback
- Spherical grille provides
effective filtering out of breath noise and popping when used for
closeup vocals, and of wind noise when used
outdoors
- Neodymium magnet for high
signal-to-noise ratio
- Shock-mounted cartridge for
quiet operation and low stand/ handling noise
- Lockable ON/OFF
switch
- Dual impedance selectable by
internal socket
- Break-resistant, slip-in swivel
adapter for stand-mounted use
- Three-pin professional audio
(XLR) connector
- Tough, steel-mesh grille resists
wear from constant use and handling; die-cast
handle
- Field serviceable and backed by
the Shure 2-year warranty
|
|
| Specifications |
- Type :
Dynamic (moving coil)
- Frequency Response : 80 to 15,000
Hz
- Polar Pattern : Cardioid (unidirectional)
symmetrical about axis
- Impedance
LO Z: Microphone rated impedance is 150 ohms (270 ohms actual) for
connection to microphone inputs rated low impedance
HI Z: Microphone impedance is "High" for connection to
high-impedance microphone inputs
-
Sensitivity (at 1,000 Hz)
Open Circuit voltage*
Lo Z: -55.5 dBV/Pa (1.7 mV)
Hi Z :-37.0 dBV/Pa* (14.1 mV)
*1 Pascal=94 dB SPL
- Polarity : Positive pressure on the
diaphragm produces positive voltage on pin 2 relative to pin 3 in
both HI Z and LO Z modes
- Switch : Built-in ON/OFF switch,
lockplate to lock switch ON
- Connector : Three-pin professional
(male XLR) type
- Cartridge Shock Mount : Internal
rubber vibration-isolator
- Swivel Adapter
Positive action, break-resistant, adjustable through 180 degrees,
slip-out removal for handheld use, designed for mounting on stand
with 5/8-in.-27 thread
- Case : Platinum beige enamel die
casting with platinum beige steel grille
- Dimensions : See User
Guide
- Net Weight : 315 grams (11.1
oz)
|
|
|
