|
|
| ALP5 |
| The ALP
5 is a time and phase corrected biamplified monitor that redefines
excellence in small-footprint studio reference systems. They
deliver a sound that's much wider, much deeper, much more defined,
and packed with much more low-end punch than mere mortal direct
field monitors. |
|
| Specifications |
- Low Frequency Driver: 5.25 in.
magnetically shielded mineral-filled polypropylene cone with high
temperature voice coil and damped rubber surroun
- High Frequency Driver: 1 in.
magnetically shielded soft dome neodymium radiator with
ferrofluid-cooled voice coil
- Frequency Response: 53Hz -
20kHz, +/-3dB, Ref 500Hz
- Crossover: 2.6kHz active
4th-order
- Amplifier Power: 50W LF Driver /
30W HF Driver
- Noise: >100dB below full
output, 20Hz - 20kHz bandwidth, unweighted
- Input Connectors: XLR and 1/4
in. connectors, accept balanced or unbalanced sources; RCA
connector, accepts unbalanced sources
- Protection: RF interference,
output current limiting, over temperature, turn-on/off transient,
subsonic filter, internal mains fuse
|
|
