|
DPA
MMB4067 Miniature Microphone
Boom, Omnidirectional, Lo-Sens & DC |
|
|
|
MMB4067-B |
|
Miniature Microphone Boom, Omnidirectional, LoSens & DC, Black |
 |
|
|
MMB4067-F |
|
Miniature Microphone Boom,
Omnidirectional, LoSens & DC, Beige |
|
|
|
MMB4067B03 |
|
Miniature Microphone Boom, Omnidirectional, LoSens & DC, Black,
3Pin Lemo |
|
|
|
MMB4067F03 |
|
Miniature Microphone Boom,
Omnidirectional, LoSens & DC, Beige, 3Pin Lemo |
|
|
|
MMB4066F10 |
|
Miniature Microphone Boom,
Omnidirectional, LoSens & DC, Beige, TA4F MiniXLR |
|
|
Miniature Microphone Boom for use with AHM6000
Adjustable Headband Mount. Combined, the boom and mount comprise a 4067
headband.
MMB4067 is available in three colors: black, beige and chocolate. |
|
Directional characteristics: |
Omnidirectional |
|
Principle of operation: |
Pressure |
|
Catridge Type: |
Pre-polarized condenser element with vertical
diaphragm |
|
Frequency range, ± 2 dB: |
Soft boost grid: 50 Hz – 20 kHz ±2 dB, 3 dB
soft boost at 8 – 20 kHz, lo-cut -10 dB at 20 Hz.
High boost grid: 50 Hz – 20 kHz ±2 dB, 10 dB boost at 12 kHz, lo-cut -10 dB at
20 Hz. |
|
Sensitivity, nominal, ±2 dB: |
Nominally 1 mV/Pa; -60 dB re. 1 V/Pa ± 3 dB at
1 kHz |
|
Equivalent noise level A-weighted: |
Typ. 31 dB(A) re. 20 µPa (max. 35 dB(A)) |
|
Equiv. noise level ITU-R BS.468-4: |
Typ. 42 dB (max. 44 dB) |
|
Total harmonic distortion (THD): |
123 dB SPL peak (<1% THD); 120 dB SPL RMS sine
(<1% THD) |
|
Max. SPL, peak before clipping: |
154 dB SPL peak before clipping |
|
Output impedance: |
30 – 40 ohm |
|
Cable drive capability: |
Up to 300 m (984 ft) |
|
Weight: |
14 g (0.5 oz) incl. cable and MicroDot
connector |
| Power supply: |
Min. 3 V – max. 50 V (via DPA adapter) |
| Capsule diameter: |
5,4 mm (0.21 in) |
| Length: |
12,7 mm (0.5 in) |
|
|
|
|
|
|
|
|
