Home

Studio Microphone M 260

Beyerdynamic

Azden  |   Beyerdynamic  |   Zoom  |   Mackie  |   Yamaha  |   Steinberg  |   JBL  |   Sound Devices  |   SHURE  |   Sennheiser  |   Tascam  |   Data video  |    Visit Us 19
<Home < Beyerdynamic < Studio Microphones < M 260 M260

Studio microphones

M 130
M 160
M 201 TG
M 260
M 99
MC 834
MC 840
MC 930
MC 930 Stereo-Set
CK 930 Set
MCE 530
MCE 530 Stereo-Set
Opus 51

Interviewing microphones

M 58
M 59 / M 59 S
MCE 58

 Special microphones

MCE 494

Shotgun microphones

MC 836
MC 837
MCE 86 II

Stereo microphones

MCE 72
MCE 82

Neckworn microphones

Opus 54
Opus 55 Mk II

Lavaliere microphones

MCE 5
MCE 10
MCE 55
MCE 60


 

Studio Microphone M 260 M260


Model: M 260 M260

Ribbon microphone with built-in high-pass-filter

The M 260 is used for vocals and miking instruments at broadcast, recording and film studios. Its flat frequency response and natural, warm ?ribbon? sonic profile make it a highly effective element of the digital recording process.
The hypercardioid polar pattern provides an extremely high gain-before-feedback and elimination of lateral noise (maximum at 115°). The M 260 is equipped with a built-in high-pass-filter which compensates the close miking effect, when the microphone is applied very close to an instrument. The microphone also features a high insensitivity towards magnetic stray fields and extreme temperatures. The rugged grille protects the microphone system against accidental hits and kicks.


Product code : M260

 

Features M260

  • Ribbon transducer performance in a rugged, versatile configuration

  • Hypercardioid polar pattern

  • Extremely high gain before feedback

  • Fast, transient response

  • Wide, flat frequency response

  • Rugged metal casing

Technical Specifications M260
Transducer type Dynamic
Operating principle Pressure gradient
Frequency response (distant miking) 40 - 18,000 Hz
Polar pattern Hypercardioid
Side attenuation > 20 dB at 115°
Open circuit voltage at 1 kHz (0dB = 1V/Pa) 1.2 mV/Pa ≡ -58 dBV
Nominal impedance 200 Ω
Load impedance ≥ 1000 Ω
Diaphragm Pure aluminium
Case/finish Brass
Connector 3-pin XLR male
Length 163 mm
Shaft diameter 24 mm
Head diameter 43,5 mm
Weight without cable approx. 230 g
 
   

Read our blogs