|
|
|
Interviewing Microphone MCE
58 MCE58
|
|
|
Model: MCE 58 MCE 58
Electret condenser microphone for ENG/EFP
(omni)
The MCE 58 condenser microphone has been specially
developed for interviewing and broadcasting.
Its unbalanced output supplies a very high level which allows
direct connection to mobile DAT and MD-recorders. The elasticated
suspension of the transducer element eliminates unwanted handling
noise and built-in active filters suppress unwanted low frequency
noise such as traffic rumble. The MCE 58 has a frequency response
curve which has been optimised for excellent intelligibility of
speech. The non-glare surface is scratch-resistant and will
withstand the rough use often associated with news gathering
events.
|
Product code:
MCE58
 
|
|
Features MCE 58
- Omnidirectional polar
pattern
- High output
level
- Rugged
construction
- Slim line design
- Battery powering (1.5
V)
|
|
Technical Specifications MCE
58 |
| Transducer
type |
Condenser (back
electret) |
| Operating
principle |
Pressure |
| Polar
pattern |
Omnidirectional |
| Open circuit voltage
at 1 kHz (0dB = 1V/Pa) |
4
mV/Pa |
| Nominal
impedance |
370 Ω
(unbalanced) |
| Load
impedance |
2
kΩ |
| Connector |
3-pin XLR; 1,3 =
ground, 2 = signal + |
| Length |
260
mm |
| Shaft
diameter |
25 mm |
| Head
diameter |
45 mm |
| Weight without
cable |
200 g |
| Frequency
response |
40 - 20,000
Hz |
| Max. SPL at 1
kHz |
132
dB |
| S/N ratio rel. to 1
Pa |
60 dB |
| A-weighted equivalent
SPL |
26 dB |
| Power
supply |
1.5 V battery (type
Mignon AA/LR 6) |
| Current
consumption |
20 mA |
|
| |
 |
|
