Audio Technica ATM710 Cardioid Condenser Handheld Microphone

Audio Technica ATM710
Audio Technica ATM710

Audio Technica ATM710 Cardioid Condenser Handheld Microphone

Product Code: ATM710

Buy Sell Sales Audio Technica ATM710

• Excels in venues with controlled stage volume or in-ear monitoring
• Superior anti-shock engineering for low handling noise
• Condenser design for studio-quality performance
• Integral 80 Hz HPF switch and 10 dB pad switch
• Rugged, all-metal design and construction
• Quiet-FlexTM stand clamp provides silent, exible microphone positioning

This electret singing microphone from the Artist Series range is designed for detailed and faithful voice reproduction. With a capacitor designed for studio-quality performance, the ATM710 provides remarkable clarity. This microphone is equipped with an integral 80Hz low-cut filter that allows easy switching from a flat frequency response to severe attenuation position which reduces the sensitivity of the microphone "pops" when used in proximity to voice. The ATM710 is also equipped with a 10 dB switchable attenuator that reduces the sensitivity of the microphone and provides superior SPL capacity. The cardioid microphone improves isolation of the sound source and reduces pickup of sounds to the sides and rear.

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 40 - 20,000 Hz
Open Circuit Sensitivity –40 dB (10.0 mV) re 1V at 1 Pa
Impedance 200 ohms
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Low Frequencey Roll Off 80 Hz, 12 dB/octave
Dynamci Range 127 dB, 1 kHz at Max SPL
Signal to Noise Ratio 73 dB, 1 kHz at 1 Pa
Phantom Power Reqirements 11-52V DC, 3 mA typical
Weight 274 g
Dimensions 179.0 mm (7.05") long, 50.0 mm (1.97") diameter
Output Connector Integral 3-pin XLRM-type
Accessories AT8470 Quiet-Flex® stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch