Audio Technica AE3000 Cardioid Condenser Instrument Microphone
Product Code: AE3000
Features
• Excels in high-SPL applications
• Large-diaphragm capsule
• Low-profile side-address design
• Cardioid polar pattern reduces pickup of sounds from the sides and rear
• Robust design for enduring dependability on the road
• Integral 80 Hz HPF switch and 10 dB pad
Cardioid electret microphone offering exceptional sound performance on acoustic instruments. Designed to work at high sound pressure levels, the AE3000 proves indispensable for
all percussive instruments. Its large diaphragm element excels with acoustic guitars, guitar amps, toms, overheads, percussion, snare, timpani and other acoustic instruments.
- Compact, discreet, easy to position microphone
- Small (at just 11.5cm), reaching up to 158dB SPL with the pad
- 10dB and 138dB dynamic low-cut filter at a featherweight 170g
-
Ideal for acoustic guitar amp, toms, snare, brass and overheads
- Low-profile side-address design with tapered grille allows optimal positioning of element vis-à-vis sound source
- Robust design for enduring dependability on the road
- 80 Hz high Pass Filter and 10 dB pad
- Product designed and manufactured in Japan, guaranteed for 15 years |
| Element |
Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern |
Cardioid |
| Frequency Response |
20 - 20,000 Hz |
| Open Circuit Sensitivity |
–43 dB (7.0 mV) re 1V at 1 Pa |
| Impedance |
100 ohms |
| Maximum Input Sound Level |
148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) |
| Low Frequencey Roll Off |
80 Hz, 12 dB/octave |
| Dynamci Range |
137 dB, 1 kHz at Max SPL |
| Signal to Noise Ratio |
83 dB, 1 kHz at 1 Pa |
| Phantom Power Reqirements |
11-52V DC, 3 mA typical |
| Weight |
170 g |
| Dimensions |
4.55" (115.5 mm) long, 1.89" (48.0 mm) maximum diameter |
| Output Connector |
Integral 3-pin XLRM-type |
| Accessories |
AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
|
|
