Camera |
Image Type |
B/W |
Image Size |
5.1 Mega |
Image sensor |
2/3-type Global Shutter CMOS Sensor |
No. of effective pixels (H x V) |
2464 x 2056 |
Standard output pixels (H x V) |
2448 x 2048 |
Color filter |
- |
Frame rate |
23 fps (8 bit) |
Minimum Illumination |
0.5lx (Iris: F1.4, Gain: +18dB, Shutter: 1/23s) |
Sensitivity |
F8 (400 lx, Gain: 0 dB, Shutter: 1/23s) |
SNR |
More thatn 50 dB (Lens close, Gain:0 dB, 8 bits) |
Gain |
Auto, Manual: 0 dB to 18 dB |
Shutter speed |
Auto, Maual: 60 to 1/100,000 s |
White balance |
- |
Camera Features |
Readout modes |
Normal, Partial scan |
Readout features |
LUT (Binarization, Gamma (arbitary setting), Test pattern |
Synchronization |
Hardware trigger, Software trigger, PTP (IEEE1588) |
Trigger modes |
OFF (Free run), ON (Trigger edge detection, Trigger width detection), Special trigger (Bulk/Sequential) |
User Set/ Memory channel |
16 channels |
User memory |
64 bytes x 16ch |
Partial Scan |
16 to 2464 (W) 16 to 2056 (H) |
GPO |
EXPOSURE / Strobe / Sensor readout / Trigger through / Pulse generation signal / USer definition 1, 2, 3 (Selectable) |
Other features |
Area gain, Shading correction, Defect correction, Temperature readout, LUT, 3 x 3 filter |
Interface |
Video data output |
digital Mono 8, 10, 12 bit (default setting 8 bits) |
Digital Interface |
Gigabit Ethernet (1000BASE-T/100BASE-TX) |
Camera specification |
GigE Vision Version2.0, 1.2 |
Output data clock |
- |
Digital I/O |
ISO IN (x1), TTL IN/OUT (x2, selectable) |
General |
Lens mount |
C-mount |
Flange focal length |
17.526 mm |
Power requirements |
DC +12V(10.5V to 15.0V), IEEE802.3af (37v to 57v) |
Power consumption |
DC +12V 3.0 W (max) IEEE802.3af 3.7 W (max) |
Operating temperature |
-5C to +45C |
Dimensions |
29 x 29 x 42 mm (excluding protrusions) |
Weight |
Approx 65g |
Supplied Accessories |
Lens mount cap (1), Operating Instructions
(1) |