| Camera |
| Image
Type |
B/W |
| Image
Size |
5.1 Mega |
| Image
sensor |
2/3-type Global
Shutter CMOS Sensor |
| No. of
effective pixels (H x V) |
2464 x 2056 |
|
Standard output pixels (H x V) |
2448 x 2048 |
| Color
filter |
- |
| Frame
rate |
23 fps (8 bit) |
| Minimum
Illumination |
0.5lx
(Iris: F1.4,
Gain: +18dB, Shutter: 1/23s) |
|
Sensitivity |
F8 (400 lx, Gain: 0
dB, Shutter: 1/23s) |
| SNR |
More thatn 50 dB (Lens
close, Gain:0 dB, 8 bits) |
| Gain |
Auto, Manual: 0 dB to
18 dB |
| Shutter
speed |
Auto, Maual: 60 to
1/100,000 s |
| White balance |
- |
| Camera Features |
| Readout modes |
Normal, Partial scan |
| Readout features |
LUT (Binarization, Gamma (arbitary
setting), Test pattern |
|
Synchronization |
Hardware trigger,
Software trigger, PTP (IEEE1588) |
| Trigger modes |
OFF (Free run), ON (Trigger edge detection,
Trigger width detection), Special trigger (Bulk/Sequential) |
| User Set/ Memory
channel |
16 channels |
| User memory |
64 bytes x 16ch |
| Partial Scan |
16 to 2464 (W)
16 to 2056 (H) |
| GPO |
EXPOSURE / Strobe / Sensor readout /
Trigger through / Pulse generation signal / USer definition 1, 2, 3 (Selectable) |
| Other features |
Area gain, Shading correction, Defect
correction, Temperature readout, LUT, 3 x 3 filter |
| Interface |
| Video data output |
digital Mono 8, 10, 12 bit (default setting
8 bits) |
| Digital Interface |
Gigabit Ethernet (1000BASE-T/100BASE-TX) |
| Camera specification |
GigE Vision Version2.0, 1.2 |
| Output data clock |
- |
| Digital I/O |
ISO IN (x1), TTL IN/OUT (x2, selectable) |
| General |
| Lens mount |
C-mount |
| Flange focal length |
17.526 mm |
| Power requirements |
DC +12V(10.5V to 15.0V), IEEE802.3af (37v
to 57v) |
| Power consumption |
DC +12V 3.0 W (max)
IEEE802.3af 3.7 W
(max) |
| Operating temperature |
-5C to +45C |
| Dimensions |
29 x 29 x 42 mm (excluding protrusions) |
| Weight |
Approx 65g |
| Supplied Accessories |
Lens mount cap (1), Operating Instructions
(1) |
