Specifications

General
Power Requirements CCU: DC48V, 1.7A (max.)
Ext.DC In: DC12V, 3.6A (max.)
Power Consumption 17W
Operating Temperature -10°C to +45°C
14°F to +113°F
Storage Temperature -20°C to +60°C
-4°F to +140°F
Dimensions (W x H x D) *[1] 86 x 130 x 210 mm
3 1/2 x 5 1/8 x 8 3/8 inches
Mass Approx. 1.5 kg
Approx. 3 lb 4 oz
Camera Section
Pickup Device 3-chip 2/3-inch type CMOS
Effective Picture Elements 1920 x 1080 (H x V)
Signal Format HD: 1080/59.94i, 1080/50i, 1080/29.97PsF, 1080/25PsF, 720/59.94p, 720/50p
SD: 480/59.94i, 576/50i
Spectrum System F1.4 prism system
Lens Mount Sony 2/3-inch type bayonet mount
Built-in Filters CC: Electrical
ND: 1; CLEAR, 2; 1/4ND, 3; 1/16ND, 4; 1/64ND
Sensitivity (at 2000 lx, 3200K, 89.9% reflectance) F12 (59.94 Hz), F13 (50 Hz)
Signal-to-noise Ratio Typical 59dB *[2] (1080/59.94i)
Modulation Depth HD : 45% or higher at 27.5 MHz (1080i)
Horizontal Resolution 1,000 TV lines or higher
Shutter Speed 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (59.94i mode)
1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (50i mode)
Shutter Speed (Slow Shutter (SLS)) 2, 3, 4, 5, 6, 7, 8, 16, 32, 64-frame accumulation (Only for HD1080 mode)
Input/Output
Mic Input -60dBu to -20dBu, Balance, via D-Sub 9pin, female (x1)
DC Input XLR-type 4-pin (x1), DC 10.5 V to 17 V
DC Output DC 10.5 V to 17 V, 1.5 A (max.) via D-Sub 9pin
SDI Output BNC (x2) HD-SDI or SD-SDI selectable
CCU Optical Fiber (x1), for Single Mode Fiber Cable
Distance of Power Supply (with HXCU-FB70) 500m (max.)
by CCFN Sony Hybrid Type Fiber Cable with Portable Lens Installed
Distance of Fiber Cable (with HXCU-FB70) 10km (max.)
by Single Mode Fiber Cable with Local Power Supply
Remote 8pin (x1)
RJ-45 (x1), Ether 10BASE-T, 100BASE-TX
Lens 12-pin (x1)
USB USB 2.0 (x1)
EXT Input/Output D-Sub 9pin, female (x1)
Supplied Accessories
Supplied Accessories Tally Number Plate (1 set)
Operation Guide (1)
Operation Manual (CD-ROM 1)
Notes
Note *[1] The values for dimensions are approximate.
*[2] The value is in NS (Noise Suppressor) : ON mode.