Sony BRU-SF10 HD/SD Optical Multiplex Unit for BRC-H900
Product Code: BRUSF10
Product Comparison Chart
• Various signal outputs by using two interface card slots
• Simple single cable operation of BRC-Z330 using optical fiber cable
• RS-232C/RS-422 serial control (VISCA protocol)
• One master and up to 7 slave devices can be daisy-chained via VISCA connection
• External sync input
The Sony BRU-SF10 HD Optical Multiplex Unit is designed to connect the
BRC-H900 and BRC-Z330 HD Colour Video Cameras.
The Sony BRU-SF10 HD optical multiplex unit enables the BRC-H900 and BRC-Z330 HD cameras (fitted with the optional BRBK-SF1 HD optical multiplex card) to transmit
uncompressed digital data without deterioration through the CCFC-S200 single-mode fiber-optic cable, at a maximum distance of about 6,500 feet (2 km).
- Long-distance transmission via optical fiber cable
Sony BRU-SF10 is equipped with a camera connector to allow the connection of single optical fiber cable. You can connect the BRC-H900 and BRC-Z330 HD cameras
from up to 2,000 m (6,562 feet) away by inserting the optional BRBK-SF1 HD Optical Multiplex Card into the HD camera and using the CCFC-S200 Optical Fiber Cable.
- Two interface card slots
The BRU-SF10 is equipped as standard with an RGB/component video output (D-sub 15-pin). In addition to this connector, two interface card slots allow the unit to be equipped with various
SD analog signal outputs such as composite video, S video, component video and RGB outputs, and digital signal outputs such as SD-SDI signal and HD-SDI signal outputs.
External sync signal input/output equipped
When multiple BRC-H900 and /or BRC-Z330 HD cameras are connected via the Optical Fiber Cable, the video signal can be synchronized by inputting the
sync signal into the external sync input connector.
- Audio line output connectors (phono jacks, L/R) equipped
BRU-SF10 allows output of stereo audio line signals that are transmitted from the BRBK-SF1 HD Optical Multiplex Card inserted into the BRC-H900 or BRC-Z330 HD