| Panasonic PT-ST10
Projector - ( This Model has been Discontinued
, Replaced by PT-TX300 ) |
|
|
Product Code: PTST10
|
The PT-ST10 features a newly developed short-throw lens delivering
a good size image from a very short distance. Close range
projection is ideal for use with interactive whiteboards to reduce
shadows or where projection distance is limited. Panasonic's new
Short Throw projector offers 2800 lumens of brightness producing a
good quality image even in rooms with lots of ambient light.
Combine this with superb image quality, advanced functionality and
ease of use and you have a projector suitable for a wide range of
applications. The PT-ST10 projector is ideal for the boardroom,
classroom and any situation that requires a bright projector with
superior image quality and good resolution. |
|
|
|
|
|
• 2800
Lumen Brightness
•
The New Lamp Drive System Enables a
5,000-hour Lamp Replacement Cycle
• Intelligent Power Management Function Allows Resistance to
Sudden Voltage Fluctuations
• Low Standby Power Consumption of 0.4 W Conserves
Energy
• The Daylight View Basic Function Ensures Clear Images Even
in Brightly Lit Rooms
• Use a Whiteboard to Project Images in Classrooms with no
Screens
• Quiet 29-dB Design Helps to Hold Viewers'
Attention
• Easy Remote Monitoring and Control Even When Mounted on the
Ceiling
• Various Interfaces Allow Use with a Wide Range of
Systems
• Top-Panel Lamp Replacement and Side Air Filter
Replacement
• Simplify Maintenance Even for a Ceiling-Mounted
Projector
• A Variety of Functions Provide Easy Setup
•
Effective Theft Prevention with the
Startup Logo
• Direct Power Off Function - Turn Off the Room's Main Power
Immediately After Use
|
|
|
| |
PT-ST10 |
|
Power supply |
100–240 V AC,
50/60 Hz |
| Power consumption |
300 W (0.4 W*1 in
eco standby mode. 15 W in normal standby mode. 18 W in normal
standby mode when set to audio monitor out and with fan
stopped.) |
| Optical system |
Dichroic mirror separation/prism
synthesis system |
| LCD Panel |
Panel size |
16 mm (0.63") diagonal, 4:3 aspect
ratio |
| Display method |
Transparent LCD panel (x 3,
R/G/B) |
| Drive method |
Active matrix |
| Pixels |
786,432 (1,024 x 768) x 3, total of 2,359,296
pixels |
| Pixel configuration |
Stripe |
| Lens |
Fixed, manual focus,
F 1.80, f 6.74 mm |
| Lamp |
220 W UHM lamp |
| Projection size |
1.52-2.79 m(60-110 inches) (4:3
aspect ratio) |
| Colors |
Full color (16,777,216
colors) |
| Brightness *2 |
2,800
lumens |
| Center-to-corner uniformity ratio
*2 |
85% |
| Contrast ratio *2 |
500:1 (full on/full
off) |
| Resolution (RGB) *3 |
1,024 x 768 pixels (Input
signals that exceed this resolution will be converted to 1,024 x
768 pixels.) |
| Scanning frequency |
RGB |
Horizontal: 15–91 kHz,
Vertical: 50–85 Hz |
| YPBPR |
480i (525i): fH 15.75 kHz; fv 60
Hz
576i (625i): fH 15.63 kHz; fv 50 Hz
480p (525p): fH 31.50 kHz; fv 60 Hz
576p (625p): fH 31.25 kHz; fv 50 Hz
720 (750)/60p: fH 45.00 kHz; fv 60 Hz
720 (750)/50p: fH 37.50 kHz; fv 50 Hz
1080 (1125)/60i: fH 33.75 kHz; fv 60 Hz
1080 (1125)/50i: fH 28.13 kHz; fv 50 Hz
1080 (1125)/60p: fH 67.50 kHz; fv 60 Hz
1080 (1125)/50p: fH 56.25 kHz; fv 50 Hz |
| S-Video/Video |
NTSC, NTSC4.43, PAL-M, PAL60:
fH15.75 kHz; fv 60 Hz
PAL, SECAM, PAL-N: fH15.63 kHz; fv 50 Hz |
| Optical axis shift |
10:-0.5 (fixed) |
| Keystone correction
range |
Vertical: approx.
±10° |
| On-screen menu |
17
languages: English, French, German, Spanish, Italian, Korean,
Russian, Chinese, Japanese, Swedish, Norwegian, Danish, Portuguese,
Polish, Hungarian, Czech, and Thai |
|
Installation |
Front/rear, ceiling/desk (menu
selection) |
|
Built-in speakers |
4cm-2cm
(1-1/16”-25/32”) (oval) x 1 |
| Terminals |
COMPUTER (RGB) 1 IN |
D-sub HD 15-pin
(female) x 1
RGB signal:
G: 0.7 V [p-p] (1.0 V [p-p] for sync on green signals), 75 ohms, R,
B: 0.7 V [p-p], 75 ohms, HD/SYNC, VD: TTL (positive/negative
polarity compatible)
YPBPR signal:
Y: 1.0 V [p-p] (including sync signal), 75 ohms, PB, PR: 0.7 V
[p-p], 75 ohms |
| COMPUTER (RGB) 2 IN |
D-sub HD 15-pin
(female) x 1
RGB signal:
G: 0.7 V [p-p] (1.0 V [p-p] for sync on green signals), 75 ohms, R,
B: 0.7 V [p-p], 75 ohms, HD/SYNC, VD: TTL (positive/negative
polarity compatible)
YPBPR signal:
Y: 1.0 V [p-p] (including sync signal), 75 ohms, PB, PR: 0.7 V
[p-p], 75 ohms |
| VIDEO IN |
RCA pin x 1, 1.0 V
[p-p], 75 ohms |
|
S-VIDEO IN |
Mini DIN 4-pin x 1,
Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 ohms |
|
AUDIO IN |
M3 (L, R) x 2, 0.5
V [rms] |
| VARIABLE AUDIO OUT |
M3 (L, R) x 1, 0 –2.0 V
[rms] |
| SERIAL |
D-sub 9-pin x 1, for external
control (RS-232C compliant) |
| LAN |
RJ-45 x 1, compatible with
PJLink™ (class 1), 10BASE-T/100BASE-TX |
|
Power cord length |
4.4 m (14.4') |
|
Cabinet material |
Moulded plastic
(PC+ABS) |
|
Dimensions (W x H x D)*4 |
327 x 135 x 307 mm
(12-7/8"x5-5/16"x12-3/32”) |
|
Weight *5 |
Approx. 3.1 kg (6.8
lbs.) |
|
Operating environment |
Temperature:
0°–40°C (32°–104°F) *6
Humidity: 20%–80% (no condensation) |
|
Supplied accessories |
Power cord, Power
cord secure lock, Wireless remote control, Batteries for remote
control ( AAA type for North/South America, R03 type for
Europe/Asia) x2, VGA cable, Application software (CD-ROM), safety
wire rope |
|
Optional accessories |
ET-PKB2 |
Ceiling mount
bracket |
| ET-KFB2 |
Highly durable filter
unit |
| ET-RFB2 |
Replacement air filter for
ET-KFB2 |
| ET-LAB2 |
Replacement lamp
unit |
|
|
|
|
|
