|
| All new Panasonic FW430 Series projectors provide a reliable 6,000-hour lamp that is retrofit friendly and easy to replace from the rear, while using inorganic, durable LCD panels
that allow for a crisp, luminous picture quality. With the addition of a dust-resistant cabinet and a new, reusable Eco Filter, the FW430 Series saves on time, money and maintenance by allowing up to
12,000 hours of operation before filter replacement is necessary. And FW430 Series projectors offer greater installation flexibility than ever before with HDMI and DVI-I terminals that allow a wider
range of input capabilities and features including a 2x Zoom Lens with horizontal/vertical Lens Shift that facilitates easy placement in a wide variety of rooms, and a new wireless application option
that is compatible with the iPad, iPhone and iPod. Panasonic FW430 Series projectors fit the demands of any user, or any installation no matter what the requirements. |
• 6,000 hour lamp replacement cycle
• Dust-resistant design and an eco filter that needs no
replacement for 12,000 hours
• inorganic materials maintain image quality longer
• Detail clarity processor 3 brings depth and clarity
to details
• 3,500lm of brightness in a compact and lightweight
body
• Daylight view premium for better color perception
• 2x zoom lens and horizontal/vertical lens shift
• Abundant connection terminals including HDMI
• Easy remote monitoring and control over a LAN |
| LCD Panel |
Panel size |
20.3 mm (0.8 inches) diagonal (4:3 aspect ratio) |
| Display method |
Transparent LCD panel (x 3, R/G/B) |
| Pixel Configuration |
Stripe |
| Pixels |
786,432 (1,024 × 768) × 3, total of 2,359,296 pixels |
| Lamp |
250 W UHM lamp (The lamp replacement cycle is 6,000 hours.*2) |
| Brightness |
4,000 lm (lamp mode: normal) |
| Contrast ratio |
600:1 (full on/full off) |
| Resolution |
1,024 × 768 pixels (Input signals that exceed this
resolution will be converted to 1,024 × 768 pixels.) |
| Lens |
Manual 2× zoom (throw ratio: 1.48 - 2.96:1),
manual focus F 1.7 - 2.6, f 24.0 - 47.2 mm |
| Center-to-corner uniformity |
80% |
| Screen size (diagonal) |
0.84 - 7.62 m (33 - 300 inches), 4:3 aspect ratio |
| Optical axis shift |
Vertical: ±50% from center of screen (manual)
Horizontal: ±27% from center of screen (manual) |
| Scanning frequency |
HDMI/DVI-I (digital) |
fH: 27.0 kHz - 68.7 kHz; fV: 24.0 Hz - 85.0 Hz; dot clock: 25.2 MHz - 148.5 MHz |
| DVI-I (Analog)/RGB |
fH: 15 .6 kHz - 91.1 kHz; fV: 24.0 Hz - 85.1 Hz; dot clock: 162 MHz or lower |
| YPBPR (YCBCR) |
fH: 15.75 kHz; fV: 60 Hz [480i (525i)]
fH: 31.50 kHz; fV: 60 Hz [480p (525p)]
fH: 45.00 kHz; fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz; fV: 60 Hz [1080 (1125)/60i]
fH: 27.00 kHz; fV: 24 Hz [1080 (1125)/24p]
fH: 67.50 kHz; fV: 60 Hz [1080 (1125)/60p] |
fH: 15.63 kHz; fV: 50 Hz [576i (625i)]
fH: 31.25 kHz; fV: 50 Hz [576p (625p)]
fH: 37.50 kHz; fV: 50 Hz [720 (750)/50p]
fH: 28.13 kHz; fV: 50 Hz [1080 (1125)/50i]
fH: 33.75 kHz; fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p] |
| S-Video/Video |
fH: 15.75 kHz; fV: 60 Hz (NTSC/NTSC4.43/PAL-M/PAL60), fH: 15.63 kHz; fV: 50 Hz (PAL/PAL-N/SECAM) |
| Terminals |
| HDMI IN |
HDMI 19-pin × 1 (Deep Color, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/60p, 1080/50p,
VGA (640 × 480) - WSXGA+ (1,680 × 1,050), compatible with non-interlaced signals only;
dot clock: 25.2 - 146.25 MHz;
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) |
| DVI-I IN |
DVI-I 29-pin × 1
Digital: (DVI 1.0 compliant, compatible with HDCP, compatible with
single link only)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p,
VGA (640 × 480) - WSXGA+ (1,680 × 1,050), compatible with non-interlaced signals only;
dot clock: 25.2 - 146.25 MHz;
Analog: (RGB/YPBPR (YCBCR)) |
| COMPUTER (RGB) IN |
D-sub HD 15-pin (female) × 1 (RGB/YPBPR × 1) |
| VIDEO IN |
RCA pin × 1 (composite video) |
| S-VIDEO IN |
Mini DIN 4-pin × 1 (S-Video) |
| AUDIO IN 1 |
M3 × 1 (L, R × 1), 0.5 Vrms |
| AUDIO IN 2 |
M3 × 1 (L, R × 1), 0.5 Vrms |
| AUDIO IN 3 |
RCA pin × 2 (L, R × 1), 0.5 Vrms |
| AUDIO OUT |
M3 × 1 (L, R × 1) (monitor out: 0 - 2.0 Vrms, variable) |
| SERIAL IN |
D-sub 9-pin (female) × 1 for external control (RS-232C compliant) |
| REMOTE IN |
M3 Jack x 1 (for wired remote control) |
| LAN |
RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™) |
| WIRELESS MODULE |
Connector for optional wireless module ET-WM200 × 1 |
| Keystone correction range |
Vertical: ±30° |
| Installation |
Ceiling/desk, front/rear |
| Cabinet materials |
Molded plastic (PC+ABS) |
| Power supply |
100 - 240 V AC, 3.9 - 1.4 A, 50/60 Hz |
| Power consumption |
330 W (0.3 W at 100 - 120 V AC, 0.4 W at 220 - 240 V AC when
standby mode set to eco*1,
9 W when standby mode set to normal, 20 W when standby mode set to normal and audio monitor out.) |
| Dimensions (W x H x D) |
430 × 125.5*4 × 323 mm (16 - 15/16˝ × 4 - 15/16˝ *4 × 12-23/32˝ ) (Protruding parts not included) |
| Weight |
Approximately 6.0 kg (13.2 lbs.) |
| Operating temperature |
0°C-40°C (32°F-104°F) |
| Operating humidity |
20- 80 % (no condensation) |
| Supplied accessories |
Power cord, wireless remote control unit, batteries (AA type for North America, R6/LR6 type for Europe and Asia) x 2, software
CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software Ver. 2.5, Wireless Manager ME 5.5) |
|
|
|
