| DLP™ chip |
Panel size |
17.0 mm (0.67 in) diagonal (16:10 aspect ratio) |
| Display method |
DLP™ chip x 1, DLP™ projection system |
| Pixels |
2,304,000
(1,920 x 1,200) pixels |
| Lamp |
420 W UHM lamp x 2 |
| Brightness*1 |
8,500 lm
(dual-lamp, LAMP MODE: NORMAL) |
| Center-to-corner uniformity*2 |
90 % |
| Contrast ratio*1 |
10,000:1 (full on/full off, in dynamic iris 3 mode) |
| Resolution |
1,920 x 1,200 pixels |
| Lens |
PT-DZ870 |
Powered zoom
(throw ratio 1.7-2.4:1),
powered focus
F 1.7-1.9, f 25.6-35.7 mm |
| PT-DZ870L |
Optional powered zoom/focus lenses and fixed-focus lens |
| Screen size (diagonal) |
1.27-15.24 m (50-600 in),
1.27-5.08 m (50-200 in) with the ET-DLE055,
2.54-8.89 m (100-350 in) with the ET-DLE030,
16:10 aspect ratio |
| Optical axis shift |
Vertical |
+50% from center
of screen (powered) |
| Horizontal |
±10 % from center
of screen (powered) |
| Scanning frequency |
SDI |
3G-SDI |
SMPTE ST 424 compliant,
[RGB 4:4:4 12-bit/10-bit]
1125(1080)/60i,
1125(1080)/50i,
1125(1080)/25p,
1125(1080)/24p,
1125(1080)/24sF,
1125(1080)/30p,
[YPBPR 4:2:2 10-bit]
1125(1080)/60p,
1125(1080)/50p |
| HD-SDI |
SMPTE ST 292 compliant,
[YPBPR 4:2:2 10-bit]
750(720)/60p,
750(720)/50p,
1125(1035)/60i,
1125(1080)/60i,
1125(1080)/50i,
1125(1080)/25p,
1125(1080)/24p,
1125(1080)/24sF,
1125(1080)/30p |
| SD-SDI |
SMPTE ST 259 compliant,
[YCBCR 4:2:2 10-bit]
525i(480i), 625i(576i) |
| HDMI/DVI-D |
fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 25-162 MHz |
| RGB |
fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower |
| YPBPR (YCBCR) |
fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p] |
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p] |
| Video/YC |
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
| Terminals |
| SDI IN |
BNC x 1 (3G/HD/SD-SDI) |
| HDMI IN |
HDMI 19-pin x 1 (Deep Color, compatible with HDCP) |
| DVI-D IN |
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
| RGB 1 IN |
BNC x 5 (RGB/YPBPR/YCBCR x 1) |
| RGB 2 IN |
D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1) |
| 3D SYNC 1 IN/OUT |
BNC x 1 (3D timing signal) |
| 3D SYNC 2 OUT |
BNC x 1 (3D timing signal) |
| VIDEO IN |
BNC x 1 (composite video) |
| SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| SERIAL OUT |
D-sub 9-pin (male) x 1 for link control) |
| REMOTE 1 IN |
M3 jack x 1 (for wired remote control) |
| REMOTE 1 OUT |
M3 jack x 1 (for link control) |
| REMOTE 2 IN |
D-sub 9-pin (female) x 1 for external control (parallel) |
| LAN / DIGITAL LINK |
RJ-45 x 1 (for network and DIGITAL LINK (video/network/serial
control) connection,
100Base-TX, compatible with Art-Net, compliant with PJLink™,
Deep Color, compatible with HDCP) |
| Keystone correction range |
Vertical: ±40 °
horizontal ±15° |
| Keystone correction range with the optional upgrade kit ET-UK20 |
Vertical ±45°,
horizontal ±40° |
| Installation |
Ceiling/floor, front/rear |
| Cabinet materials |
Molded plastic |
| Power supply |
120-240 V AC, 10-5.2 A, 50/60 Hz |
| Power consumption |
1,030 W (1,060 VA)
(0.3 W when STANDBY MODE set to ECO*1, 3 W when STANDBY MODE set to NORMAL) |
| Dissipation BTU |
3,516 BTU/hour
(without light DZ870: 3,400 BTU/hour) |
| Dimensions (W x H x D) |
PT-DZ870 |
498 x 200 x 556 mm (19-19/32 x 7-7/8 x 21-7/8 in) (with supplied lens) |
| PT-DZ870L |
498 x 200 x 513 mm (19-19/32 x 7-7/8x 20-3/16 in) (without lens) |
| Weight |
PT-DZ870 |
Approximately 18.3 kg (40.3 lbs) (with supplied lens) |
| PT-DZ870L |
Approximately 17.6 kg (38.8 lbs) (without lens) |
| Operating environment |
Operating temperature: 0-45 °C (32-113 °F),
operating humidity: 10-80 % (no condensation) |
| Operation noise |
40 dB (dual lamp operation, lamp mode: NORMAL),
35 dB (dual lamp operation, lamp mode: ECO) |
| Applicable software |
Logo Transfer Software,
Multi Projector Monitoring &
Control Software,
Geometry Manager Pro
(included in the ET-UK20) |
| Supplied accessories |
Power cord with secure lock, wireless/wired remote control unit,
batteries (R03/AAA type x 2), software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring & Control Software) |
