|
Panasonic BL-C121
Wireless Network Camera
|
|
Product Code :
BLC121
|
Install the
camera anywhere with no transmission cables to connect, and enjoy
high-speed communications at 2.4 GHz, 54 Mbps*2 (IEEE
802.11g) or 2.4 GHz, 11 Mbps*2 (IEEE
802.11b).
*1 Cannot be used in bathrooms or
outdoors.
*2 The indicated speed is the
maximum theoretical value of the wireless LAN specification, and
does not denote the actual data transfer speed achieved by the
cameras.
Cameras
simultaneously send MPEG-4 images in three resolutions (VGA, QVGA,
and QSIF_SP), and JPEG images in the same three resolutions in
favour motion, standard, and favour clarity image-quality types.
MPEG-4 is recommended for viewing smooth motion images, and JPEG is
recommended for recording higher quality images.
* Size comparisons
are simulated.
MPEG-4 Visual License
This product is
licensed under the MPEG-4 Visual patent portfolio license for the
personal and noncommercial use of a consumer for (i) encoding video
in compliance with the MPEG-4 Visual Standard (“MPEG-4
Video”) and/or (ii) decoding MPEG-4 Video that was encoded by
a consumer engaged in a personal and non-commercial activity and/or
was obtained from a video provider licensed by MPEG LA to provide
MPEG-4 Video. No license is granted or shall be implied for any
other use.
It's so
reassuring to see your pet's happy face while you are out. A simple
mouse operation is all you need to enlarge the image, using the 10x
digital zoom, so you get a clear view of your pet's expression.
* This feature is not available when viewing on a cell
phone.
* Area is
multiplied by 10x.
Check the images
from four cameras at once. Monitor 12 cameras in all, and display
them all at once (with no audio). Use a recording program
(BB-HNP11) to save images and audio to a PC hard disk.
*1-1 To use this function, one of
the cameras must be registered with the addresses of all other
cameras in advance. The 640 x 480 resolution cannot be used with
the multi-screen display.
*1-2 Switching from the moving
image mode to the still image mode reduces the load on the network.
The still image mode is recommended when the Internet connection
speed is 100 kbps or lower (guideline speed).
*1-3 This function can be used
only with a PC. It cannot be used with a cell phone.
Sounds picked up
by the built-in microphone can be heard through the PC. Video
monitoring with sound enhances security by providing additional
information that images cannot convey.
In this mode, the
camera captures an image only when motion is detected based on the
preset threshold or sensitivity of the camera. The image can be
stored temporarily in the camera, or sent to you by e-mail or FTP
data transfer.*1
*1-1 The sensor's detection
history can also be e-mailed to you once each day at a preset
time.
*1-2 POP before SMTP
authentication and SMTP authentication (PLAIN LOGIN and CRAM-MD5)
are supported.
You can record
the moving images captured by the camera on your PC. This lets you
enjoy natural motion that isn't possible with still
pictures.
*Recording is
possible for only one camera. To record images from multiple
cameras, use the BB-HNP11.
This system
supports SSL data encrypted communications. By encrypting the
network camera's image and other data for network transmission, it
prevents electronic eavesdropping for greatly improved
security.
* For JPEG only.
The audio feature does not work on cell phone.
By connecting
commercially available sensors, like door sensors, or switches to
the External I/O Connector, sensor detection acts as a trigger to
record and send images. This helps to expand the camera's
installation area and applications.
While viewing
MJPEG images on the single or multi-camera screens, your computer
can play a sound to notify you when motion is detected or the
external sensor is triggered.
|
|
Server |
| Image compression |
JPEG (Motion
JPEG), MPEG-4 |
| Video resolution |
640 x 480, 320 x
240 (default), 192×144 |
| Image quality |
JPEG (favor
clarity, standard, favor motion) , MPEG-4 |
| Frame rate |
Max. 30
frames/sec. (640 x 480, 320 x 240 or 192 x 144) |
| Security |
User ID /
password, SSL |
| Supported protocols, |
IPv4/IPv6
Dual-Stack |
| IPv4: TCP, UDP,
IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP,
UPnP™, |
| SMTP
Authentication, RTP, RTSP, RTCP, SSL, HTTPS, TLS |
| IPv6: TCP, UDP,
IP, HTTP, FTP, SMTP, DNS, ICMPv6, POP3, NDP, NTP, |
| RTP,
RTSP, RTCP, SSL, HTTPS,
TLS |
| User access limit |
Max. 30
simultaneous users (Max. 10 users in SSL
communication) |
| Buffered images |
Approx. 250 images
(320 x 240) |
| •Standard
image quality •with time display |
| Image transfer method |
SMTP,
FTP, HTTPS |
| Image buffer/transfer triggers |
Alarm, timer or
motion detection |
|
Network camera |
| Zoom |
10x digital zoom
(by area) |
| Viewing angle |
58°
horizontal, |
| 45°
vertical |
| Sensor type |
1/4 inch CMOS
sensor, approx. 320,000 pixels |
| Lens focal point |
Fixed (focal
range: 0.3 m to ∞) |
| Lens brightness |
F2.8 |
| Required light intensity |
5 to 10,000 lux
(in color night view mode : 3 to 10,000 lux ) |
|
Audio |
| Audio communication |
One-way
communication |
| Audio compression |
ADPCM 32
kbps |
| Audio bandwidth |
300 Hz – 3,4
kHz |
| Audio input |
Built-in
microphone |
|
Wireless |
| Standards |
IEEE
802.11b/g |
| Antenna |
Diversity |
| Number of channel |
11ch. (USA), 13ch.
(Others) |
| Transmission speed |
Up to 54
Mbps. |
| Security |
SSID, WEP
(64/128/152 bit), WPA-PSK (TKIP), WPA2-PSK (AES) |
|
Terminal |
| Network interface |
Ethernet
(10Base-T/100Base-TX) |
| External I/O connector |
Input:1
Output:1 |
|
General |
| Operating temperature |
+5°C to
+40°C (+41°F to +104°F) |
| Operating humidity |
20% to 80% (no
condensation) |
| Dimensions (H x W x D) |
85 x 85 x 35.5
mm |
| (3 3/8 x 3 3/8 x 1
3/8 inches) |
| Weight (only the unit) |
140 g
(0.31lb) |
| Power supply (E) |
Input: 220-240 V
AC, |
| output: 9 V
DC |
| Power supply (CE) |
Input: 100-240 V
AC, |
| output: 9 V
DC |
| Power supply (US) |
Input: 120 V
AC, |
| output: 9 V
DC |
| Consumption |
6.8
W |
|
|
|
|
|
