BR-DV6000E BR-DV6000 BR
DV6000EN BRDV6000
BRDV6000E
|
Ideal spooler and flexible, easy-to-use non-linear editing
machine with a variety of interfaces
JVC New Product 2012
| GY-HMQ10
| GY-HM600 |
GY-HM650
|
|
|
General
BR-DV6000E
Power requirements |
DC 12 V (from provided 12 V, 5 A AC
adapter) |
Power consumption |
Approx. 38 W |
Dimensions |
212 (W) x 88 (H) x 327 (D) mm (8-3/8" x 3-1/2" x
12-7/8") |
Weight |
Approx. 4.5 kg (9.9 lbs.) |
Temperature |
Operating |
5°C to 40°C (41°F to
104°F) |
Storage |
-20¡C to 60¡C (-4¡F to
140¡F) |
Humidity |
Operating |
30% to 80% RH |
Storage |
85% RH or less |
Format |
DV format (SP mode only. Not compatible with the
LP mode.) |
Signal format |
PAL |
Usable tape |
Standard/Mini DV tape |
Tape width |
6.35 mm |
Tape speed |
18.831 mm/s |
Record/play time |
276 minutes (with LA-DV276PRO tape), 63 minutes
(with an M-DV63 tape) |
Video signal recording format |
8-bit, 13.5 MHz, 4:2:0 |
Video inputs (BNC) |
Analog composite |
1.0 V (p-p), 75 ohms |
Analog Y/C |
Y: 1.0 V (p-p), 75 ohms
C: 0.3 V (p-p), 75 ohms |
Analog component (BNC) |
Y: 1.0 V (p-p), 75 ohms
R-Y/B-Y: 0.7 V (p-p), 75 ohms |
External sync input |
0.3 V (p-p), 75 ohms |
Video output |
Analog composite |
1.0 V (p-p), 75 ohms |
Analog Y/C |
Y: 1.0 V (p-p), 75 ohms
C: 0.3 V (p-p), 75 ohms |
Analog component (BNC) |
Y: 1.0 V (p-p), 75 ohms
R-Y/B-Y: 0.7 V (p-p), 75 ohms |
Audio signal recording format |
16-bit, 48 kHz for two channels or 12-bit, 32
kHz PCM for four channels |
Frequency response |
20 Hz to 20 kHz (16 bits) |
Audio inputs |
Line |
-8 dBs, 50 kohms, unbalanced (RCA) |
Mic |
-60 dBs, 600 ohms, unbalanced (mini
jack) |
Audio outputs |
Line |
-8 dBs, 1 k-ohm, unbalanced (RCA) |
Monitor |
-8 dBs, 1 kohm, unbalanced (RCA) |
Headphone |
Stereo, unbalanced (mini jack) |
|
Input |
0 dBs ± 3 dBs, low impedance |
Output |
0 dBs ± 3 dBs, low impedance |
IEEE 1394 interface |
4-pin |
RS-422 interface |
D-sub 9-pin |
JVC bus connector |
DIN 12-pin |
AC adapter x 1 |
AC cable x 1 |
|
|
|