• 17-inch class (16.5-inch
viewable) IPS panel with 16.7 million color
reproduction
• High 1500:1 Contrast Ratio
•
Full HD resolution: 1920 x 1080 pixels
• Fully
capable of displaying 2048 x 1080/24p (DCI 2K)
signal
• Built-in Histogram, Waveform, Vector
Scope, Zebra
• Built-in Audio Level Meter up to
16ch
• Lissajous audio metering
• 3 Gamma
Preset Modes
• Wide array of markers and
indicators
• Two 3G-SDI & Dual Link inputs
•
IMD (in monitor display)
• Optimized I-P
conversion
• Supports the EIA/CEA-708 and
EIA/CEA-608 SDI closed captioning standards
•
Color Temperature settings (9,300K, 6,500K, 5,600K
or User mode)
• IP modes: Normal, Field, and
Cinema (24p)
• Pixel-by-pixel (1:1) display
•
Time code display (SDI)
• Built-in stereo speaker
• Tiltable stand with 2-way installation capability
• Carrying handle
| General Specifications |
| Type | Multi-format LCD monitor |
| Screen Size | 17 inches, 419.7 mm measured diagonally |
| Aspect Ratio | 16:10 |
| LCD Panel | Active matrix TFT |
| Effective Screen Size (W x H) |
365.8 x 205.7 mm (14-7/16" x 8-1/8") |
| Pixels (resolution) | 1920 x 1200 |
| Display Colors | 16.77 million |
| Viewing Angle (typ.) | |
| Horizontal / Vertical | 178° / 178° |
| Brightness (typ.) | 300 cd/m2 |
| Contrast Ratio (typ.) | 1500:1 |
| Applicable Standard | 3G SDI: SMPTE424M/SMPTE425M; DUAL LINK HD SDI: SMPTE372M;
HD SDI: BTA S-004C, SMPTE292M; SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525; EMBEtdED AUDIO: SMPTE299M, SMPTE272M |
| Audio Output | Internal: 1.0 W + 1.0 W (L/R) |
| Environmental Conditions |
Operating temperature: 5°C to 35°C (41°F to 95°F), Operating humidity: 20% to 80% (non condensing) |
| Storage temperature | -20°C to 60°C |
| Energy Efficiency Class | D |
| Power Requirements | |
| AC | 120 V/220 V – 240 V, 50/60 Hz |
| DC | 12 V – 17 V |
| Rated Current | |
| North America | 0.47 A |
| Europe | 0.30 A |
| DC | 5.0 A |
| Power Consumption | |
| On-mode | 29.0 W |
| Stand-by mode | 0.30 W |
| Annual Energy Consumption* |
43 kWh/year |
| Dimensions (WxHxD)
with stand excluding protrusions | 430 x 349.6 x 212.9 mm
(16-15/16"" x 13-13/16"" x 8-7/16"") |
| Dimensions (WxHxD) without stand |
430 x 309 x 102 mm
(16-15/16"" x 12-3/16"" x 4-1/16"") |
| Weight with stand | 8.2 kg (18.1 lbs) |
| Weight without stand | 5.8 kg (12.8 lbs) |
| Provided Accessories | AC power cord x1 (only for N.America), ßAC power cord x2 (only for Europe), power cord holder x 1, screw x 2 (for power cord holder), instruction manual x 1, core filter x1 (only for N. America), CD-ROM (instructions PDF file) x 1 (only for Europe) |
*Annual energy consumption figures are based on the power consumption of the monitor operating 4 hours per day for 365 days. The actual energy consumption will depend on how the monitor is used.
| Input/output connectors |
| Video | |
| 3G/HD/SD SDI (OUT 2: SWITCHED OUT) |
Digital signal output (compatible with EMBEtdED AUDIO signals): 1 line switched out, BNC connector x 1 |
| 3G/HD/SD SDI (OUT 1) | Digital signal output (compatible with EMBEtdED AUDIO signals): 1 line, BNC connector x 1 |
3G/HD/SD SDI (IN 1)
3G/HD/SD SDI (IN 2) |
Digital signal input (compatible with EMBEtdED AUDIO/DUAL LINK signals): Auto detection, 2 lines, BNC connector x 2 |
| Component(Y, PB/B-Y, PR/R-Y) |
IN: 1 line; BNC connector x 3, Y: 1V (p-p), 750 (with sync);PB/B-Y, PR/R-Y: 0.7 V (p-p), 750 |
| HDMI | IN x1 (compatible with HDCP) |
| VIDEO | Composite video signal Input/output: 1 line; BNC connector x 2,1V (p-p), 750 (IN and OUT are connected with a bridge connection. Auto termination.) |
| Audio | |
Audio Assign (IN 1)
Audio Assign (IN 2) |
Analog audio signal input: 2 lines, RCA connector x 2, 3.5mm diam. stereo mini jack x 1, 500 mV (rms), high impedance |
| Audio Assign (MONITOR OUT) |
Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms) |
| External Control | |
| MAKE/TRIGGER | RJ-45 terminal x 1 (8 pin) |
| RS-485 | RJ-45 terminal x 2 (IN/OUT) (8 pin) |
| RS-232C | D-sub 9 pin x 1 |
|
