Vinten Adaptors & Accessories

Adaptor Leveling QUICKFIX 4-bolt flat base (3328-30)
The Quickfix levelling adaptor with four-hole flat base not only allows for quick set-up and breakdown, but can also be leveled independently to whatever it is clamped to. Compatible with all Heavy Duty Tripods as well as all Vinten pedestals.
Max. Capacity: 45 kg / 99.2 lbs

Four-Hole to 150mm Bowl Adaptor (3104-3)
This adaptor allows a pan and tilt head with a standard Vinten four-hole base to be installed on a 150 mm bowl.
Load capacity 45 kg (100 lb).

100mm Leveling Bowl Adaptor (3330-16)
This adaptor allows a pan and tilt head with a 100 mm ball base to be installed on a standard Vinten four-hole base. It may also be secured using a ‘Quickfix’ adaptor.
Max. Capacity: 45 kg (100 lb)

150mm Leveling Bowl Adaptor (3330-17)
This adaptor allows a pan and tilt head with a 150 mm ball base to be installed on a standard Vinten four-hole base. It may also be secured using a ‘Quickfix’ adaptor.
Max. Capacity: 45 kg (100 lb)

Product Code : 34903

Discontinued

Heavy Duty Quickfix Adaptor (3490-3)
The heavy-duty Quickfix adaptor has an extended capacity range of up to 100 kg / 220.5 lbs and is compatible with the Heavy Duty Tripods as well as all Vinten pedestals.
Max. Capacity: 100 kg / 220.5 lbs

Quickfix Adaptor with 100mm Ball Base
(3144-3)
The heavy-duty Quickfix adaptor has an extended capacity range of up to 100 kg / 220.5 lbs and is compatible with the Heavy Duty Tripods as well as all Vinten pedestals.
Max. Capacity: 100 kg / 220.5 lbs

Quickfix Adaptor with 150mm Ball Base
(3143-3)
The Quickfix adaptor with 150 mm ball base is compatible for use with any Pozi-Loc 150 mm bowl tripod.
Max. Capacity: 45 kg / 99.2 lbs

Quickfix Adaptor with Four-hole Flat Base
(3100-3)
The Quickfix adaptor with four-hole flat base is compatible for use with the Heavy Duty Tripods as well as all Vinten pedestals.
Weight:0.65 kg / 1.43 lbs
Max. Capacity:45 kg / 100 lbs

Mitchell Adaptor, 4-Hole Flat Base to Heavy Duty Tripod (3103-3)
This adaptor allows a four-hole flat-base pan and tilt head to be installed on a heavy-duty tripod with a Mitchell fixing.
Load capacity 100 kg (220 lb)

Mitchell Base with Wingnut (3750-3)
This adaptor allows pan and tilt head with a standard Vinten four-hole base to be mounted on a Mitchell base. The adaptor comprises a Mitchell adaptor, wingnut and key. Load capacity 100 kg (220 lb).
Weight: 1 kg / 2.2 lbs
Max. Capacity: 100 kg / 220 lbs

Mitchell Centre Screw (3724-3)
This adaptor allows a Vector pan and tilt head to be mounted on a Mitchell base. The adaptor comprises a spider, wingnut and key, together with fixing hardware..
Load capacity 100 kg (220 lb)

Mitchell Spider Adaptor (3055-3)
[add 'B' to order black version]
TThis adaptor allows a pan and tilt head with a Mitchell centre screw to be installed on a standard Vinten four-hole base.
Load capacity 100 kg (220 lb)

4-Hole Fixing to Skid (3368-24B)
This adaptor allows a pan and tilt head with a standard four-hole fixing to be installed on a Vinten skid.
Load capacity 150 kg (330 lb).

Scaffold Clamp (3407-1A)
This adaptor provides a flat base with a standard four-hole fixing that may be mounted directly onto Outside Broadcast scaffolding.
Load capacity 182 kg (400 lb)

Camera Mounting Plate for Vision Blue to Vision 10AS Heads (V4043-1901)
Camera Mounting Plate suitable for use with Vision blue, 3AS, 5AS, 8AS and 10AS heads

Camera Mounting Plate for Vision 100/250 Heads (3449-900SP)
Camera Mounting Plate suitable for Vision 100 and Vision 250 Heads.

Extended Camera Slide Plate with 2x 3/8" Screws (3330-33)
The Extended Camera Slide Plate can be used to increase the positional range of the camera on the pan and tilt head, particularly useful for balancing changing camera configurations, for example because of added accessories.
Suitable for all Vision heads.

Standard Wedge with Fixing Screws (3053-33)
This wedge is secured to the underside of a camera and may be installed in a wedge adaptor on any suitable pan and tilt head.
Weight: 0.85 kg / 1.87 lbs
Load Capacity: 150 kg / 330 lbs

Intermediate Plate (3384-11)
This plate is fitted between a portable camera and a wedge and provides a locking surface for the wedge adaptor.

EFP Quickfit Automatic Adaptor (3761-3)
This adaptor provides a quick-release fixing for EFP cameras weighing up to 45 kg (100 lb).
includes 3761-13 wedge

EFP Quickfit Wedge (3761-13)
Suitable for use with the EFP Quickfit Automatic Adaptor.

ENG Quickfit Automatic Adaptor (3471-3)
This adaptor provides a quick-release fixing for cameras weighing up to 25 kg (55 lb). Available in grey or black.

ENG Quickfit Wedge (3763-11)
Suitable for use with the ENG Quickfit Automatic Adaptor.

1/4" Pin Adaptor (3330-29)
The 1/4 in. Pin adaptor is designed to connect a camera with a 1/4 inch BSW mounting hole and a location hole to a standard Vision camera slide plate. The pin and 1/4 inch BSW camera mounting screw are connected by a plastic link.

Vision Head Pan Bar (3219-110)
Black, non-telescopic pan bar and clamp for Vision 3AS to Vision 10AS

Vision Head Pan Bar (3219-91)
Black, telescopic pan bar and clamp for Vision 8AS, 10AS,100 and 250

Vector Pan Bar (3219-93)
Extra short pan bar and clamp [suitable for Vector 75, 750 and 950]

Vector Pan Bar (3219-94)
Short pan bar and clamp [suitable for Vector 75, 750 and 950]

Vector Pan Bar (3219-82)
Telescopic pan bar and clamp [suitable for Vector 75, 750 and 950]

Vector Pan Bar (3219-116)
Short pan bar and clamp [suitable for Vector 430]

Vector Pan Bar (3219-115)
Telescopic pan bar and clamp [suitable for Vector 430]

Extended Pan Bar Clamp (3219-105)
The Extended Pan Bar Clamp can be used to position the pan bar away from wider cameras and other obstructions. The clamp is only available in black and is suitable for all Vision heads.
 

Product Code : 33343

Discontinued

Rounded Soft Case (3334-3)
Soft Case for Vision blue range, Vision 3, 6, & 8 with single-stage Pozi-Loc tripod

Rounded Soft Case (3358-3)
Soft Case for Vision blue range, Vision 3, 6, 8 & 11 with two-stage Pozi-Loc tripod

Product Code : 33403

Discontinued

Square Soft Case (3340-3)
Soft Case for Vision 3, 6, 8, 11 &100 with two-stage Pozi-Loc tripod

Product Code : 33413

Discontinued

Square Soft Case (3341-3)
Soft Case for Vision 250 with EFP Pozi-Loc tripod

Product Code : 35353

Discontinued

Square Soft Case (3535-3)
Soft Case for HDT-1 single-stage heavy duty tripod

Product Code : 33433

Discontinued

Square Soft Case (3343-3)
Soft Case for HDT-2 two-stage heavy duty tripod

Product Code : 39093

Discontinued

Hard Case (3909-3)
The hard case is designed to offer added transit protection to Vision systems in soft cases. Vision 3AS, 5AS, 8AS, 10AS & 100 with single-stage Pozi-Loc tripod [in soft case]

Product Code : 39103

Discontinued

Hard Case (3910-3)
The hard case is designed to offer added transit protection to Vision systems in soft cases.
Vision 250 with EFP Pozi-Loc tripod [in soft case]

Product Code : 33723

Discontinued

Tube (3372-3)
Tubes are available for all Vision systems and Pozi-Loc tripods [excluding Baby Legs]. Tubes for Vision 3, 6, 8, 11 & 100 with single-stage Pozi-Loc tripod

Tube (3396-3)
Tubes are available for all Vision systems and Pozi-Loc tripods [excluding Baby Legs]. Vision 3, 6, 8, 11 & 100 with two-stage Pozi-Loc tripod

Product Code : 34113

Discontinued

Tube (3411-3)
Tubes are available for all Vision systems and Pozi-Loc tripods [excluding Baby Legs]. Tubes for Vision 250 with EFP Pozi-Loc tripod

Product Code : 34113S

Discontinued

Tube (3411-3S)
Tubes are available for all Vision systems and Pozi-Loc tripods [excluding Baby Legs]. Tubes for HDT-1 single-stage heavy duty tripod

Product Code : 34113T

Discontinued

Tube (3411-3T)
Tubes are available for all Vision systems and Pozi-Loc tripods [excluding Baby Legs]. Tubes for HDT-2 two-stage heavy duty tripod

Transit Case (3907-3)
Hard transit case for all Vector heads. Vector 450*, 90 and 950 pan & tilt heads

Product Code : 33553

Discontinued

Transit Case (3355-3)
Hard transit case for all Vector heads.
Vector 750 pan & tilt head

Product Code : 34253P

Discontinued

Pozi-Loc Carrying Strap (3425-3P)
The Pozi-Loc Carrying Strap provides a convenient way to carry Pozi-Loc Tripods [excluding Baby Legs] and Vision systems whilst filming.

Product Code : 380327

Discontinued

Side Monitor Bracket (3803-27)
Bracket enabling a side monitor to be fitted onto a pan and tilt head via an extra rosette. Suitable for Vector 450, 90, 950 and 950 Active pan & tilt heads

Product Code : V40341010

Discontinued

Side Monitor Bracket (V4034-1010)
Bracket enabling a side monitor to be fitted onto a pan and tilt head via an extra rosette. Suitable for Vector 750 pan & tilt head

Product Code : 333030

Discontinued

Short Securing Knob for Vision Heads (3330-30)
This knob is designed for use on tripods or other bowl bases where space below the bowl is restricted.

Product Code : 3525901SP

Discontinued

Quickfix / 4-Bolt Flat Base for Vision 250
(3525-901SP)
Dual Quickfix and 4-bolt flat base for Vision 250.
Compatibility:Vision 250

Product Code : 3525900SP

Discontinued

Ball Base for Vision 250 (3525-900SP)
Dual 100 mm / 150 mm Ball Base to fit the Vision 250.
Ball Base: Dual 100 / 150 mm
Compatibility: Vision 250
 

Product Code : 333021

Discontinued

1/4" Camera Fixing Screw (3330-221)
1/4 " Camera Fixing Screw.

Product Code : 3170202

Discontinued

3/8" Camera Fixing Screw (3170-202)
3/8 " Camera Fixing Screw.

Product Code : 31553B

Discontinued

200mm Hi-Hat (3155-3B)
This adaptor provides a 200 mm (7.9 ") height extension for any tripod or pedestal with a standard four-hole fixing.

Product Code : 338412

Discontinued

Document Holder for Quattro Pedestals (3384-12)
This Document Holder is designed to carry essential day-to-day items and clips onto the base of the Quattro-L and Quattro-OBL [not suitable for Quattro-SL.

Product Code : 342921

Discontinued

Large Steering Ring (3429-21)
The Large Steering Ring is fitted as standard on Quartz Pedestals, the Quattro-L and the Quattro-SL, and can be purchased as an alternative for the Osprey Elite and Quattro-OBL. Suitable for Osprey Elite, Quartz One* and Quartz Two*

Product Code : 344543

Discontinued

Large Steering Ring (3445-43)
The Large Steering Ring is fitted as standard on Quartz Pedestals, the Quattro-L and the Quattro-SL, and can be purchased as an alternative for the Osprey Elite and Quattro-OBL. Suitable for Quattro-L*, Quattro-OBL and Quattro-SL*

Product Code : 332944

Discontinued

OB Wheel Cable Guards for Osprey Elite (3329-44)
OB Wheel Cable Guards for Osprey Elite

Product Code : 332930

Discontinued

OB Wheel Set Osprey Elite (3329-30)
OB Wheel Cable Guards for Osprey Elite

Product Code : 3429904SP

Discontinued

Set of Soft Wheels for Quartz One and Two (3429-904SP)
Set of Soft Wheels for Quartz One and Two

Product Code : 332943

Discontinued

Set of Soft Wheels for Quartz One and Two (3429-904SP)
Set of Soft Wheels for Quartz One and Two

Product Code : 370232

Discontinued

Nitrogen Charging Adaptor (3702-32)
Enables a suitable pressure source to be easily connected to any Vinten pedestal.
NOTE: this piece of equipment IS NOT a pressure reducing valve.
 

Osprey Light to Tracking Base Adaptor
(V3950-1110)
This adaptor enables the Osprey Light pedestal to be used on the Tracking Dolly/Skid [3369-57].

Product Code : 342921

Discontinued

Large Steering Ring (3429-21)
The Large Steering Ring is fitted as standard on Quartz Pedestals, the Quattro-L and the Quattro-SL, and can be purchased as an alternative for the Osprey Elite and Quattro-OBL. Suitable for Osprey Elite, Quartz One* and Quartz Two*

Product Code : 344543

Discontinued

Large Steering Ring (3445-43)
The Large Steering Ring is fitted as standard on Quartz Pedestals, the Quattro-L and the Quattro-SL, and can be purchased as an alternative for the Osprey Elite and Quattro-OBL. Suitable for Quattro-L*, Quattro-OBL and Quattro-SL*