|
GLIDECAM V-25 SYSTEM |
|
|
The V-25 System Includes:
This model has been discontinued and replaced by
Glidecam
X22
- Glidecam V-25 Vest
- Glidecam V-25 Arm
- Glidecam V-25 Sled with Anton Bauer style
base
- Glidecam L7-Pro LCD with Anton Bauer Battery
Plate
- (1) Glidecam V-25 Docking
Bracket
- (1) Glidecam V-25 Dovetail Video
Camera Plate
- (1) Camera power cable - 2-pin
Lemo style to 4-pin XLR
- (1) L7-Pro power cable - 2-pin
Lemo to L7-Pro 2.1mm
- (1) BNC to BNC video
cable
- (1) RCA to BNC video
cable
- Wrenches and
hardware
- (1) Setup and Operations
Guide
|
Product Code:
V25System
|
|
|
Glidecam V-25 Support Vest |
|
This
model has been discontinued and replaced by
Glidecam
X22
The Glidecam V-25 Vest is lightweight and comfortable, and can be
adjusted to fit a wide range of operators. High endurance, dual
density, EVA foam padding and integral T6 aluminum alloy create a
vest that can hold and evenly distribute the weight of the system
across the operator's shoulders, back, and hips. For safety, quick
release, high impact buckles allow the vest to be removed quickly.
The Vest’s outer shell is made of 1000 denier cordura fabric,
and 7-panel seat belt strapping, noted as being the best in the
industry. The Glidecam V-25 Vest incorporates a unique and
proprietary Arm-to-Vest Connector that allows the Support Arm to be
attached and removed from the Vest without affecting the
operator’s trim settings
|
|
|
|
Glidecam V-25 Arm |
|
This
model has been discontinued and replaced by
Glidecam
X22
The GLIDECAM V-25 Dyna-Elastic™ Support Arm employs Six
Titanium Extension Springs within its machined, hardcoat anodized,
Exo-Skeletal Shell. Utilizing internal pulleys and high-strand
cables, the energy of the Titanium Springs provides the Support Arm
with its lifting power. The spring tension is field adjustable and
allows for varying camera weights. The Support Arm can carry a
total combined camera and sled weight from 25 to 40 pounds.
Numerous rigid, internal support structures strategically
positioned within the Support Arm greatly reduce the effects of
external torsional forces. This feature greatly enhances the
arm’s ability to resist twisting even while under a full
load.
The GLIDECAM V-25’s Dual-Action Support Arm
incorporates thirty-two precision radial bearings within its T6
aluminum structure. The placement and implementation of these
double-shielded bearings produce minimal friction and allow both
segments of the Support Arm to pivot and boom smoothly throughout
their full range. Integrated Rubber Bumpers placed along the length
of the arm reduce noise when the arm is placed in extreme
positions. The Arm Post assembly has internal ball bearings that
afford the Arm Post a high degree of low-friction rotation. This
significantly enhances the arm’s ability to reduce the
transmission of undesirable movements caused by the operator to the
sled.
|
|
|
|
Glidecam V-25 Sled |
|
This model has been discontinued and replaced
by Glidecam X22
Glidecam V-25
Sled
Glidecam V-25 Sled shown docked on V-25 Docking Bracket
(Discontinued)
|
|
|
Glidecam V-25 Docking Bracket
|
|
Glidecam X-45 Sled with Anton Bauer or V-Mount
Base Email Us for
Offer |
|
High end sled with 1.75" post, Docking Bracket,
for cameras up to 45 lbs.
|
|
|
Glidecam X-45 Sled with
V-Lock Base Email Us for
Offer |
|
High end HD-SDI sled with heavy duty 1.75” post, V-Lock Base
and Docking Bracket, for cameras up to 45 lbs
|
|
|
Glidecam X-45 Sled with
PAG Base Email Us for
Offer |
|
High end HD-SDI sled with heavy duty 1.75” post, PAG Base and
Docking Bracket, for cameras up to 45 lbs
|
|
Home
Back to
Top
|
