| Clear-Com BP-850 1 or 2-Channel Beltpack with battery sled & antennas |
Product Code: BP850
|
| Highlights of BP850 |
|
·
PDA interface
provides a convenient method to configure beltpack frequencies and functions through a built-in IrDA port using a Palm-OS PDA and PDA850 Tools.
· Beltpac controls are configurable for
multiple transmit modes. Separate talk buttons for each channel can be configured for "push-to-talk" or "push-to-enable" operation. Buttons not configured for transmitter control can be configured
for party-line selection, paging, ISO, alert and call functions.
· Individual volume controls
allow beltpack users to adjust and mute the volume. The MASTER and Auxiliary Volume Controls provide a push-to-mute function so you can temporarily mute a channel while
keeping previous volume settings.
· Dual-channel access
allows users to choose from two hardwired intercom channels. Simultaneous dual-channel access is obtained using the optional 2nd receiver module.
·
Alert and Page Relay Closures
allow you to remotely control external devices from the beltpack.
· Channel lockout
enables multiple beltpack users to share the same operating frequency and automatically disable a beltpack’s ability to
transmit if another user is already transmitting on that frequency.
·
Low battery alert
informs the user through the headset and base station that the beltpack batteries are low.
·
Versatile headset connector
allows use of standard 4-pin male connector or field-install of a 4-pin or 5-pin female XLR connector. The
beltpack auto-detects the microphone type.
·
Detachable antennas
with strong, threaded connectors make storage and shipping easy.
·
Auxiliary audio input
allows a separate audio source, such as an IFB receiver, to be heard through the beltpack headset and controlled by the
beltpack volume controls.
· LED blackout mode
enables crew members to work on a darkened stage without tell-tale lights being visible to the audience.
· Automatic status reporting
to base keeps the technical crew informed of the battery condition and which users are talking.
|
| |
| Technical Specifications of BP-850 |
| |
| General |
| Frequency Range: |
470-608 MHz, 614-698 MHz in Dual TX/RX Bands
|
| Antenna Type: |
Flexible ¼-Wave, Field-Replaceable
|
| Frequency Response: |
50 Hz to 10 kHz
|
| Battery Requirements: |
6 "AA" Alkaline Cells (Optional NiMH)
|
| Battery Life: |
PTE: Up to 9 Hours (Alkaline)
PTT: Up to 15 Hours (Alkaline)
|
| Size: |
5.75" x 4.38" x 2.31" (14.6cm x 11.13cm x 5.87cm)
|
| Weight: |
16 oz (0.45 kg) with Batteries
|
| Base Interface: |
RJ10, RS-232
|
| PDA Interface: |
IrDA
|
| Auxiliary Input: |
Connector: 1/8" Miniature Phone Jack
Impedance: 8kΩ, Input Level: 100 mV
*Overrides Optional 2nd Receiver if Installed.
|
| Headset Connector: |
XLR-4M (Optional Field-Installable XLR-4 or 5F)
|
| Mic Input: |
Auto-Detect, Low Impedance Dynamic or Electret
|
| Headset Output: |
200 mW @ 1% THD into 50Ω
|
| Controls: |
Main Volume Control with Power Switch and Push-to-Mute,
2nd RCVR/AUX Volume Control with Push-to-Mute,
4 Mode/Function Switches,
Microphone Gain Adjustment
|
| Indicators: |
Power/Low Battery LED, Transmit LED & 4 Channel/Status LEDs
|
| |
| Transmitter |
| Type: |
720 Synthesized (480 for Upper Band), 25 kHz Channel Steps
|
| Transmit Power: |
100, 50, 10 or 1mW, Fixed Output/Automatic Control
|
| Transmission Modes: |
Push-to-Talk (PTT), Push-to-Talk-Shared (PTS), or Push-to-Enable (PTE),
May Be Configured for Momentary or Latch Mode
|
| Modulation Type: |
FM
|
| Deviation: |
.50 kHz
|
| Frequency Stability: |
10 ppm
|
| Harmonics/Spurious: |
Exceeds FCC Specifications
|
| |
| Receiver |
| Type: |
720 Synthesized, 25 kHz Channel Steps
|
| RF Sensitivity: |
<1μV for 20dB SINAD
|
| Squelch Threshold: |
User Configurable
|
| Image Rejection: |
>70dB
|
| Squelch: |
Adjustable Carrier Signal Level
|
| Squelch Quieting: |
80dB
|
| Frequency Stability: |
10 ppm
|
| Distortion: |
<1% at Maximum Deviation
|
|
|
|
|
