Clear-Com FreeSpeak Base Station

Clear-Com FreeSpeak-Base 1.88GHz-1.93GHz band digital wireless basestation

Product Code: FreeSpeakBase

1.88GHz-1.93GHz* Band Digital Wireless Basestation. Supports up to 20 Beltpacks and 10 Antennas. The basestation has connections for two Partylines and five 4-wires including a dedicated SA output and Program audio input. (Former FREESPEAK10 Basestation)

The FreeSpeak base station serves as the heart of the wireless communication system for all digital wireless beltpack users. All wired and wireless communications flow through the basestation. Each wireless beltpack and wired intercom connection on the rear panel has its own full-duplex port, and the voice communication from each is sampled, mixed, and re-routed throughout the system as desired.

The base station supports up to 20 wireless beltpacks, with a front-panel vacuum fluorescent display showing status and battery information. Each beltpack has its own timeslot and can be individually addressed by the base, allowing multiple combinations of beltpack-to-beltpack and small-group conversations to happen simultaneously.

*exact frequency range depends upon country

Specifications of FreeSpeak-Base

Base-to-Beltpack Frequency Response:	100 Hz – 7.1 kHz.
No. of Beltpacks per Base Station:	20
No. of Transceiver/ Antennas Supported by Base, Basic Base:	10
No. of Active Antenna Ports:	2
PC Programming Port:	DB9
Relay Port:	DB9
Party-Line Intercom A and Intercom B (each):	XLR-3F with XLR-3M loop through, on/off termination switch (via software)
Four-Wire/Matrix Connection:	4 RJ-45 (Intercom 3 – 6)
Program Input:	XLR-3F, transformer isolated, line-level input
Stage Announce Output:	XLR-3M, transformer isolated, line-level output
Front-Panel Headset:	4-pin male connector with 2-channel capability and individual talks and listens
Front-Panel Display:	254 x 32 dot-graphic VFD
Front-Panel Indicators:	2 Talk LEDs for frontpanel headset, CH A and CH B party-line enable LEDs, Program Input enable LED, 10 individual antenna LEDs
Base-Station Programming/Editing:	Push-to-enter rotary encoder
Dimensions:	1RU unit, 1.75 x 19.0 x 12.5 in (44 x 483 x 312 mm) (HxWxD)
Weight :	10.8 lbs (4.9 kg)