|
Clear-Com Eclipse-Pico 36 port 1RU Digital matrix frame |
|
Product Code: EclipsePiCo
|
Eclipse PiCo is ideal for communication needs in small to mid-size production environments such as OB vans, studio and sports
facilities. It provides high-quality full-duplex communication requiring a moderate number of ports in a compact 1RU form. The front user menu enables quick and easy changes to input/output
levels, routes and configurations.
Eclipse PiCo offers 36 full-duplex panel/4-wire ports, including four 4-wire ports, in a one-rack unit (1RU) chassis. Each Eclipse PiCo has two power supplies for fail-safe redundancy and eight
on-board general purpose inputs and outputs. It supports V-Series, I-Series, 4000 series panels, ICS panels and all IMF interface modules including the AES Co-Ax and DIG-2 modules for external
panels.
|
| Features of Eclipse-Pico |
- User menu for I/O levels, routing and status
- Intelligent trunk linking
- Seamless interfacing with Clear-Com IMF modules
- DTMF inward access and outward dialing
- 4 on-board configurations selectable by front menu
- Individual level control adjustments
|
| Technical Details of Eclipse-Pico |
0 dBu is referenced to 0.775 volts RMS
| General |
Height: 44 mm or 1.75 inches (1 RU)
Width: 482 mm (19 inches)
Depth: 300 mm (12 inches)
Weight: 5 kg max.
Power Consumption: 40 W Max. per inlet
Number of Panel Compatible Ports: 32
Number of Analog Audio Ports: 4
Number of Expansion Modules: 1
Number of Power Supply Units: 2
Maximum Number of Ports Per System: Can intelligently link 2 Eclipse PiCo matrices
|
| Matrix Performance |
Sample Rate: 48 kHz
Resolution: 24 bit
Frequency Response: @ 48 kHz sampling30 Hz – 22 kHz ± 3 dBu
Crosstalk (adjacent channel): <–70 dBu
Nominal Level: 0 dBu
Matrix headroom: 18 dBu
Distortion: <0.05 %, @ 0 dBu, 300 Hz to 10 kHz; <0.1 %, @ 0 dBu, 100 Hz to 20 kHz
Off Noise: <–98 dBu relative to +18 dBu, 20 Hz - 22kHz
On Noise: <–83 dB relative to +18 dBu, 20 Hz - 22kHz
Key Response, Intra-System: <40 ms for audio route
Linked Systems: <60 ms for audio between matrices
Temperature: 0 to +40 C, ambient; -55 to +70 C, storage
Humidity, Maximum: 90% non-condensing
|
| Matrix Interfaces |
GPI inputs: 8 total; opto-isolated
GPI outputs (relays): 8 total; isolated relay contacts
GPI connector: 25-pin D-type socket on rear panel
GPO connector: 25-pin D-type plug on rear panel
External GPI-6/RLY-6: RJ-45 on rear panel
Network: 10/100 Base-T Ethernet ; maximum distance: 100 meters; connector RJ-45
Serial PC RS-232
Baud rate: 57600
Maximum distance: 10 meters
Number of ports: 1
Connector: 3.5 mm socket on front
|
| System Programming |
Crosspoint Level Control: 0.355 dB steps
Input Level Control: 0.355 dB steps
Output Level Control: 0.355 dB steps
VOX Input Detection Threshold: 0 dB to – 40 dB adjustable
|
| Minimum PC Requirements |
Processor: Pentium III 600 MHz
Memory: 512 MB RAM
Hard Disk: 500 MB
Input Devices: CD-ROM Drive
Display Resolution: SVGA
User Entry Keyboard, Mouse
Ports: 2 serial ports and/or network IEEE 802.3
|
| Ethernet card |
Network: IEEE 802.3 Ethernet Card
Operating Systems: Windows 2000 SP4/XP Professional
SP2/2003 Server: SP1
|
| |
|
|
|
|
|
