| Clear-Com E-Que Integrated Wireless E1 and T1 Control card (6RU frames only) |
|
Product Code: EQue
|
The E-Que card is an Eclipse frame card, capable of being used as a wireless cell controller card (known as FreeSpeak Integra) and E1
and T1 digital audio trunks. The E-Que card slots directly into an Eclipse-Median or Eclipse-Omega, providing a seamless connection for digital wireless communication and high capacity links between matrix frames.
|
| Key Benefits of E-Que |
• E-Que provides FreeSpeak Integra radio connectivity for 40 FS-BP or CEL-BP digital wireless beltpacks. This means that panels can call beltpacks with the same signalling LEDs and labels making it all more intuitive.
• Up to 40 users per E-Que card (depending on the environment)
• Up to 4 E-Que cards can be used in one matrix (expanding up to 40 antennas per system offering many cells for wide area roaming.)
• Up to 200 pre-set roles can be defined in the ECS management system
• Full duplex 7kHz ”commentator” bandwidth for high-clarity communications
• The E-Que Front & Rear Card set has up to 8 directly attached Antennas or 10 antennas via 2 locally powered splitters.
• E-Que Digital trunks provide Eclipse to Eclipse linking between sites, cities or countries over high density standard digital telecomm lines.
• E-Que cards can be simply switched between CellCom/FreeSpeak and digital trunking as configuration option inside the ECS software.
• The E-Que card’s E1 trunking can be connected to the E1 connection of a 4000 series Hi-Que card to link an Eclipse matrix to a Drake 4000 matrix.
|
| Specifications of E-QUE |
• E-Que is available for the Eclipse-Median or Eclipse-Omega matrices
• E-Que Card capacity per Matrix frame: Eclipse-Median: 4 cards, Eclipse-Omega: 4 cards
• Maximum number of beltpacks per E-Que card: 40 beltpacks
• 1 E-Que card can support a maximum of 2x30 E1 trunk lines
• 1 E-Que card can support a maximum of 2x24 T1 trunk lines
• 1 E-Que card can support a maximum of 10 active antennas
• CellCom/FreeSpeak Frequency Spectrum 1.88GHz to 1.93GHz
• G.722 CODEC 16khHz sample rate (@64kpbs)
• Audio Pass band: 100Hz - 7kHz
• Cat 5 connectivity
• Environmental: -67˚F to +158˚F (-55˚C to +70˚C
E-Que Interface Front Card
• Height: 6RU
• Depth: 300 mm
• Operating Temperature: 0º C to +40º C
• Storage Temperature: -55º C to +70º C
• Humidity: 40 - 90% non-condensing
• Power: (combined cards) +3.3V 3.5A; +5V 0.7A' +12V 0.05A
E-Que Interface Rear Card
• Height: 6RU
• Depth: 58mm (max)
• Operating Temperature: 0º C to +40º C
• Storage Temperature: -55º C to +70º C
• Humidity: 40 - 90% non-condensing
Compatibility
•Eclipse-Median and Eclipse-Omega Matrix frames
•Requires ECS V5.0 software or later
•The ECS/CEL passcode is required to unlock CellCom/FreeSpeak Integra functions. |
|
|
|
