Yamaha ProAudio Singapore

Yamaha Professional Audio
Loud Speakers - Installation Series

  Mackie | Yamaha Professional Audio | Steinberg | JBL   | Sound Devices | Azden |SHURE  |  Sennheiser  | Tascam  | Data video Feedbacks Contact Us  |  Email Us |  Visit Us  |

Home > Yamaha Professional Audio > Speakers > Loud Speakers > Installation Series
Yamaha ProAudio
Mixers
Processors
Power Amps
Speakers
Loudspeakers
CBR 10 IF2115M/64
CBR 12 IF2115M/95
CBR 15 IF2115M/99
BR 10 IF3115/64
BR 12 IF3115/95

BR 12M

IH2000/64
BR 15 IH2000/95
BR 15M IL1115
IF2205 IS1118
IF2108 IS1215
IF2208 IS1218
IF2112/64 S112V
IF2112/95 S115V
IF2112/99 S215V
IF2112/AS SM10V
IF2112M/64 SM12V
IF2112M/95 SM15V
IF2112M/99 SW115V
IF2115/64 SW118V
IF2115/95 CW118V
IF2115/99 SM218V
IF2115/AS  
Surface Mount Speakers
VS6 VXS10S / VXS10SW
VS4 VXS10ST / VXS10STW
VXS5 / VXS5W VXS5-VA / VXS5-VAW
 VXS8  / VXS8W VXS8-VA  / VXS8-VAW
Ceiling Speakers
VXC4 / VXC4W VXC6-VA / VXC6-VAW
VXC6 / VXC6W VXC8-VA / VXC8-VAW
VXC8 / VXC8W VXC5F / VXC5FW
 VXC4-VA / VXC4-VAW VXC3F / VXC3FW
Ceiling Speakers
DSR215 DBR12
DSR118W DBR15
DSR115 DXS12
DSR112 DXS15
DXR8 MSR400
DXR10 MSR250
DXR12 MSR100
DXR15 MSR800W
DBR10  
Powered Monitor Speakers
MSP7 STUDIO HS 8
MSP5 STUDIO HS 8S
SW10 STUDIO MSP 3
HS 5 MSP101III
HS 7  
DAW Systems
PA Systems
Add-On-Effects
Interfaces
Recorders

 

Yamaha Loud Speakers - Installation Series



Model:
Installation Series Speakers
Yamaha Speakers


Favorites with discerning contractors and engineers, these speakers feature Uni-Phase design and matching sound - even between different models - for easy system setup and tuning
 

 LaCie d2 Network 2 301504
Optional Products:

The Quest for the Best in Pro Sound

Technological innovation occurs at a breathtaking pace in the world of professional audio, except in one vital but often-overlooked area. In spite of all the innovation, the fact remains that speaker systems are still the most critical, variable, and problematic link in the audio chain. Speakers interact directly with their environment and other components in the system, making it essential to both use speakers that are properly designed for their application and to set them up so that they and the room function as a well-balanced whole. The second part of the above equation is the realm of the sound contractor and engineer, but the first is the responsibility of the manufacturer, and that's where Yamaha's dedication to delivering the best can mean the difference between average and superlative sonic performance.

Yamaha realized more than 40 years ago that simply building systems around speaker units bought from other manufacturers would not do, initiating a long and arduous but fruitful quest for ideal speaker performance based on original technology. Along the way innovative Yamaha speaker technology has resulted in a number of breakthrough products that established new performance standards in a number of critical fields.

The goal is simple: to provide sound reproduction that is totally faithful to the source. But as anyone involved in speaker design and manufacture will attest, achieving that simple goal is extremely difficult, and no speaker on earth can claim absolute perfection in this regard. The good news is that now we've come closer than ever to achieving that elusive goal.

Yamaha's new Installation Series Speakers address a number of important issues that give them unprecedented performance and handling characteristics for live sound applications, including permanent installations. In particular, phase characteristics have been kept smooth and consistent throughout the entire series, so you can mix and match speakers to suit any system and venue without ending up with hot and dead spots due to phase interference. And of course sonic quality is superb throughout the entire reproduction range so the full impact of the source material reaches the audience undiluted.

This approach to design is evident in every Yamaha Commercial Audio product. The proof is in the enormous success of our groundbreaking PM1D and PM5D digital consoles, digital signal processing products, and industry-standard analog live consoles and related gear. Yamaha is simply dedicated to delivering the best sonic performance available anywhere, at any price, from system input to output. Our new Installation Series breaks new ground once again with performance and convenience that can take the sound at any venue to a higher level.
 

*Legends
Spec 1: IF2208, IF2205, IF2108
Spec 2: IF2112/64, IF2112M/64, IF2115/64, IF2115M/64
Spec 3: IF2112/95, IF2112M/95, IF2115/95, IF2115M/95
Spec 4: IF2112/99, IF2112M/99, IF2115/99, IF2115M/99
Spec 5: IF2112/AS, IF2115/AS, IF3115/64, IF3115/95
Spec 6: IH2000/64, IH2000/95, IL1115
Spec 7: IS1118, IS1215, IS1218

 
  • A Wide Selection of Models Accommodate the Widest Possible Range of Installations
    Two important criteria for speakers to be used in installations are installation/positioning ease and service area controllability. The Yamaha Installation Series includes 16 different models with speakers from 5 to 15 inches in 2-way, main, support, floor monitor, subwoofer, and other configurations. With a range of driver sizes, single and dual woofers, and a variety of external configurations, these speakers integrate easily into a wide variety of installations. The 12-inch and 15-inch models are available with four different coverage angles. By selecting and combining the appropriate models it is possible to create systems that provide any type of coverage required - from near to far, narrow to wide. Furthermore, all models feature rotatable horns to allow vertical or horizontal operation. In addition to multiple rigging points for convenient flying/hanging installation, specialized U-brackets and array frames are available to accommodate just about any installation requirements. (Four eye bolts are provided with all models except the IF2205 and IF2205W).
     

  • Consistent Sound and Phase Characteristics
    Most installations involve the positioning of multiple speakers at numerous locations. The Installation Series offers a range of models that can be combined as required while delivering the most natural sound field possible, with the greatest controllability. The Installation Series has been specifically designed to provide an acoustic "white canvas" on which the most delicate tonal gradations will stand out clearly. The entire lineup has been designed with consistent phase characteristics so that they will deliver optimum performance in any combination, and respond smoothly to equalization for unprecedented installation flexibility and natural sound.
     

  • A Range of Processing Data Available for Yamaha DME Series Processors
    The Installation Series speakers will deliver peak performance when used with Yamaha digital mixing consoles such as the PM5D, or DME series digital mixing engines. In particular, a range of speaker processing programs specifically designed to bring out the best in the Installation Series are available for DME series digital mixing engines. Even with complex multi-speaker systems you only need to select the appropriate program to be running at optimum performance in no time.
     

  • Cabinets
    Building a high-performance speaker cabinet is a lot more complex than simply building a solid box. The materials used, size, shape, bracing, porting, acoustic treatment and other factors all interact to determine the final performance of the design. This can be partly determined by good old science and engineering, but a lot also hinges on experience and exhaustive listening and field tests. Yamaha Installation Series Speakers feature cabinets constructed from high-quality 11-ply Finland birch, as much as 16 millimeters thick in most models. Solid gluing of all joints and critical placement of internal bracing results in cabinets that are virtually indestructible as well as free from resonance. The cabinets also feature a wrap-around grille that, in addition to being aesthetically pleasing, minimizes reflections from the cabinet frame.
     

  • Horns
    To allow the system designer maximum freedom and flexibility, all Yamaha Installation Series Speakers feature rotatable horns in a variety of configurations. 60°x 40°, 90°x 50°, and 90°x 90° horns are available for the 12-inch and 15-inch models, while 60°x 40° and 90°x 50° horns are available for the 3-way designs. 8-inch and 5-inch models feature 90°x 60°horns. Horns are made from fiber-reinforced plastic to minimize unwanted resonance.
     

  • Networks
    Selected top-quality crossover network parts including heavy-gauge inductor wire, large film capacitors, and painstakingly designed circuit boards deliver unmatched sonic quality and reliability. Heavy 16-gauge wire is used for all internal wiring.
     

  • Drivers
    HF drivers feature one-piece titanium domes formed to precision tolerances for superior sound as well as long-term reliability. 12-inch, 15-inch and 18-inch woofer cones have been specially treated for water resistance, providing optimum durability in the widest range of operating environments.
     

  • Finish
    The fact that speakers must sound good goes without saying, but in permanent installations they have to look good and match the interior of the venue, too. Yamaha Installation Series Speakers are available in black or white, featuring a durable textured paint. But if basic black or white doesn't suit your visual requirements, they can be easily repainted as required.
     

  • Grille & Logo
    Extremely rugged 14-gauge steel grills with a 63% aperture ratio protect your speakers without detracting from their sonic performance in any way. An acoustically transparent foam is located behind the grilles for a smart, unobtrusive looks without degraded sound. The logo plate can easily be rotated to match the speaker's orientation, or removed completely.
     

  • Connectors & Mode Selectors
    To match the widest possible range of systems and wiring arrangements, Yamaha Installation Series Speakers feature parallel-connected barrier-strip and Neutrik NL4 connectors (NL8 on 3-way models). The IF2112/AS, IF2115/AS, IF2108, and IF2208 models feature an additional Neutrik NL4 connector - 1 barrier strip + 2 Neutrik NL4 connectors - to facilitate wiring in monitor applications. 12-inch and 15-inch 2-way models have a selector on the rear panel that allows easy switching between bi-amp and single-amplifier drive modes. The 8-inch and 5-inch models are designed for single-amp use only. 3-way models allow switching between tri-amp and bi-amp modes. Dual-woofer subwoofers also allow switching between parallel and discrete modes for maximum system compatibility and flexibility. All mode switches are recessed to prevent inadvertent operation.
     

  • Pole Mount Sockets & Handles
    Since the "multi-angle" IF2112/AS, IF2115/AS, IF2108, and IF2208 models are likely to be used for floor monitoring or other applications that require maximum portability, they are equipped with handles that make moving them about comfortable and easy. They also feature pole-mount sockets so they can be easily pole mounted wherever you need extra monitor or fill sound.
     

  • Rigging
    Multiple M10 rigging points are provided for shoulder eye bolts or optional U-brackets. Four eye bolts are supplied with each speaker. All hardware is industry-standard, and is compatible with third-party mounting accessories. Horizontal and vertical array frames are available in black or white to match the standard speaker finishes.
     

  • Shape
    In addition to having a significant effect on a speaker's sound, the shape of its cabinet is an important factor for handling and setup versatility. The IF2112/AS, IF2115/AS, IF2108, and IF2208 models feature a "multi-angle" design that allows them to be used as floor monitors as well as for house sound. The IF2205 features a compact "stair-step" configuration. All other full-range cabs have a 30º trapezoidal shape that results in minimum interference when the speakers are combined in arrays.

General Specifications
  IF2208 IF2108 IF2205
Images

IF2208

IF2108

IF2205
Dimensions Width 283mm 283mm 457mm
Height 673mm 448mm 146mm
Depth 250mm 250mm 226mm
Weight 19kg 14kg 7.5kg
Similar Descriptions •90º x 60º Dispersion Pattern.
•Durable black or white finish (can be painted to match any interior).
•Horn can be rotated 90-degrees, allowing vertical or horizontal mounting.
Other Descriptions •Multi-angle cabinet design enables floor monitor applications.

•1.75" high-frequency compression driver with 1" exit.

•Eleven 10mm-screw (M10) and six 8mm-screw (M8) suspension points provided for flexible rigging.

•Optional matching U-bracket available.

•Parallel-wired two Neutrik NL4 and barrier strip connectors.
•1" high-frequency compression driver with 1" exit.

•Six 8mm-screw (M8) and two 6mm-screw (M6) suspension points provided for flexible rigging.

•Matching U-bracket available as an option.

•Barrier strip connectors
General Specifications
  IF2112/64 IF2115/64 IF2112M/64 IF2115M/64
Images

IF2112/64

IF2115/64

IF2115M/64

Dimensions Width 378mm 448mm 378mm 448mm
Height 695mm 770mm 695mm 770mm
Depth 454mm 534mm 454mm 534mm
Weight 31kg 39kg 28kg 34kg
Similar Descriptions •12" and 15" woofer models available.
•60º x 40º Dispersion Pattern.
•Horn can be rotated 90-degrees, allowing vertical or horizontal mounting.
•Trapezoidal design eliminates interference in array use.
•Switchable between single-amp and bi-amp operation.
•Fifteen 10 mm-screw (M10) and four 8 mm-screw (M8) suspension points provided for flexible rigging.
•Durable black or white finish (can be painted to match any interior).
•Optional matching array frame and U-bracket available.
•Parallel-wired Neutrik NL4 and barrier strip connectors.
Other Descriptions •3" high-frequency compression driver with 1.4" exit. •1.7" high-frequency compression driver with 1.4" exit.
General Specifications
  IF2112/95 IF2115/95 IF2112M/95 IF2115M/95
Images

IF2112/95

IF2115/95

IF2112M/95

IF2115M/95

Dimensions Width 378mm 448mm 378mm 448mm
Height 695mm 770mm 695mm 770mm
Depth 454mm 534mm 454mm 534mm
Weight 31kg 39kg 28kg 34kg
Similar Descriptions •12" and 15" woofer models available.
•90º x 50º Dispersion Pattern.
•Horn can be rotated 90-degrees, allowing vertical or horizontal mounting.
•Trapezoidal design eliminates interference in array use.
•Switchable between single-amp and bi-amp operation.
•Fifteen 10 mm-screw (M10) and four 8 mm-screw (M8) suspension points provided for flexible rigging.
•Durable black or white finish (can be painted to match any interior).
•Optional matching array frame and U-bracket available.
•Parallel-wired Neutrik NL4 and barrier strip connectors.
Other Descriptions •3" high-frequency compression driver with 1.4" exit. •1.7" high-frequency compression driver with 1.4" exit.
General Specifications
  IF2112/99 IF2115/99 IF2112M/99 IF2115M/99
Images

IF2112/99

IF2115/99 IF2112M/99 IF2115M/99
Dimensions Width 378mm 448mm 378mm 448mm
Height 695mm 770mm 695mm 770mm
Depth 454mm 534mm 454mm 534mm
Weight 31kg 39kg 28kg 34kg
Similar Descriptions •12" and 15" woofer models available.
•90º x 90º Dispersion Pattern.
•Horn can be rotated 90-degrees, allowing vertical or horizontal mounting.
•Trapezoidal design eliminates interference in array use.
•Switchable between single-amp and bi-amp operation.
•Fifteen 10 mm-screw (M10) and four 8 mm-screw (M8) suspension points provided for flexible rigging.
•Durable black or white finish (can be painted to match any interior).
•Optional matching array frame and U-bracket available.
•Parallel-wired Neutrik NL4 and barrier strip connectors.
Other Descriptions •1.7" high-frequency compression driver with 1.4" exit. •1.7" high-frequency compression driver with 1.4" exit.

 

General Specifications
  IF2112/AS IF2115/AS IF3115/64 IF3115/95
Images IF2112/AS IF2115/AS IF3115/64 IF3115/95
Dimensions Width 378mm 448mm 610mm 610mm
Height 695mm 770mm 1006mm 1006mm
Depth 333mm 374mm 600mm 600mm
Weight 29kg 35kg 64kg 64kg
Other Descriptions •12" and 15" woofer models available.
•60-100º x 60º dispersion pattern.
•Horn can be rotated 90-degrees, allowing vertical or horizontal mounting.
•3" high-frequency compression driver with 1.4" exit.
•Switchable between single-amp and bi-amp operation.
•Sixteen 10 mm-screw (M10) suspension points provided for flexible rigging.
•Pole mountable.
•Durable black or white finish (can be painted to match any interior).
•Optional matching U-bracket available.
•Parallel-wired two Neutrik NL4 and barrier strip connectors.
•Two horn dispersion patterns available: 60º x 40º and 90º x 50º.
•Horn can be rotated 90-degrees, allowing vertical or horizontal mounting.
•15" low-frequency driver, 8" midrange driver, and 3" high-frequency compression driver with 1.4" exit.
•Switchable between bi-amp and tri-amp operation.
•Fifteen 10mm-screw suspension points (M10) provided for flexible rigging.
•Durable black or white finish (can be painted to match any interior).
•Optional matching array frame available.
•Parallel-wired Neutrik NL8 and barrier strip connectors.

 

General Specifications
  IH2000/64 IH2000/95 IL1115
Images IH2000/64 IH2000/95 IL1115
Dimensions Width 610mm 610mm 610mm
Height 591mm 591mm 591mm
Depth 600mm 600mm 600mm
Weight 33kg 33kg 38kg
Similar Descriptions •Durable black or white finish (can be painted to match any interior).
•Optional matching array frame and U-bracket available.
•Parallel-wired Neutrik NL4 and barrier strip connectors.
Other Descriptions •Two horn dispersion patterns available: 60º x 40º and 90º x 50º.
•Horn can be rotated 90-degrees, allowing vertical or horizontal mounting.
•8" midrange driver and 3" high-frequency compression driver with 1.4" exit.
•Switchable between single-amp and bi-amp operation.
•Fifteen 10mm-screw suspension points (M10) provided for flexible rigging.
•15" low-frequency driver.

•Thirteen 10mm-screw suspension points (M10) allow flexible rigging.

 

General Specifications
  IS1118 IS1215 IS1218
Images IS1118

IS1215

IS1218
Dimensions Width 610mm 448mm 610mm
Height 591mm 883mm 1006mm
Depth 709mm 610mm 709mm
Weight 44kg 63kg 76kg
Similar Descriptions •High power subwoofer.
•Dual woofers can be switched for discrete drive (IS1215 and IS1218).
•Twelve 10mm-screw suspension points (M10) provided for flexible rigging.
•Durable black or white finish (can be painted to match any interior).
•Optional matching array frame available (for IS1118 and 1218 only).
•Parallel-wired Neutrik NL4 and barrier strip connectors.

 

Expandore Singapore India Vietnam

Read our blogs