Yamaha XP5000 Power Amplifier

Yamaha XP5000

XP Series Power Amplifier

 |  Homepage | Clear Com | Datavideo | DPA | Mackie | Event | Yamaha  | Steinberg | JBL | Sound Devices | Azden | SHURE | Sennheiser | Tascam | Kramer | Zoom | Feedbacks | Email Us | Visit Us |
Home > Yamaha Professional Audio > Power Amplifiers > XP5000

 Yamaha XP5000 Power Amplifier

Yamaha XP5000 Power Amplifier
Product Code: XP5000
Buy Sell Sales Yamaha XP5000 Power Amplifier

A full model revision takes Yamaha's high-end PC-N power amplifiers to the next level - the PC-1N Series. The new PC-1N Series amplifiers feature an extraordinarily solid low end, rich midrange, and superbly defined highs. They also deliver fast response and exceptional stability even in the face of serious power supply limitations. Refinements throughout this expanded five-model lineup make these amplifiers the new benchmarks for quality, reliability, and versatility in professional applications.

5 Models from 700W to 100W
The XP power amplifier series includes 5 models with different outputs ranging from 700W (stereo, 8ohms) to 100W (stereo, 8ohms). The broad choice of power output the XP series provides means you can select a model that will ideally match the power requirements of your application. For even further flexibility all models can operate in 3 modes: in the stereo mode the two channels are independent; the parallel (dual mono) mode allows a single mono input signal to drive both channels and two independent speaker systems; and in the bridge mode, both channels work together to deliver maximum power. The environmentally friendly XP series amplifiers also use lead-free parts.

Careful Parts Selection and Design Focused on Sound Quality
The XP-series power amplifiers deliver sound quality that's on a par with top-class models thanks to painstaking circuit design and components specifically selected to deliver the highest sound quality possible. These amps also feature anti-vibration measures inherited from the top-line PC-1N series, and as a result deliver tight, solid lows, extraordinary midrange presence, and precisely defined highs. The XP amps deliver unmatched clarity for speech and vocals.

A Perfect Blend of Performance and Value
Optimized circuit design and high-performance parts have been combined in the most efficient way possible to bring you outstanding performance with unmatched value. You can shop around, but you're unlikely to find this level of performance in other amplifiers in this price range.

Lightweight 2U Units
Thanks to EEEngine technology and an impressive array of other Yamaha innovations, the XP-series amplifiers are housed in compact 2U-size chassis that belie their high output and superior sound quality. They're remarkably lightweight, too, making them an ideal choice for portable live-sound applications as well as installations.

Connector and Features for a Variety of Applications
The XP series is equipped with a selection of input and output terminals that make them suitable for professional sound applications: XLR and Euroblock input terminals, with Speakon and 5-way binding post output terminals.
The XP7000 can be used to drive 70V lines (stereo) while the XP3500 is compatible with 100V lines (bridged) for high-impedance multi-speaker systems. The XP series is an ideal choice for medium-scale facilities such as churches, halls, and banquet rooms, as well as conference rooms and restaurants. But in addition to the applications just mentioned, the XP-series amplifiers deliver power and performance that make them suitable for events, exhibitions, and concerts as well.

Ideal Companions for the DME64N and DME24N Digital Mixing Engines and Installation Series Speakers
If you're building or planning to build a system using Yamaha's DME64N or DME24N Digital Mixing Engine and/or our high-performance Installation Series speakers, XP-series amplifiers may well be the ideal choice to provide the audio power your system needs.

Exclusive EEEngine Technology
An advanced switching regulator and original Yamaha EEEngine technology give the XP-series amplifiers unprecedented power efficiency. The switching regulator stabilizes output voltage and current for maximum drive efficiency, and EEEngine technology further reduces power consumption without sacrificing sound quality. In fact, you get approximately 50% lower power consumption than conventional class-AB amplifiers while still benefiting from class-AB sound quality. This improved efficiency is also the key to reduced heat generation, longer component life, lighter weight, more compact dimensions, and extended reliability.

Remote Monitoring and Control
XP-series amplifiers are equipped with monitor/remote terminals that allow remote monitoring of protection status and output levels, as well as remote control of the mute and standby functions.

Comprehensive Protection Circuits, Indicators, and Variable-Speed Cooling
Protection circuits include power-on muting, output protection, and DC detection. Indicators clearly show the status of the protection systems and other parameters: a PROTECTION indicator indicates protection circuit activation, a TEMP indicator indicates heat sink overheating, a POWER/STANDBY indicator shows the unit's power status, and SIGNAL and CLIP indicators are provided for each channel. Continuously variable low-noise fans efficiently prevent overheating and maintain high stability.
100V models XP5000
Dynamic power; 1kHz 20ms nonclip 2ohms 1050W x 2
4ohms; Bridge 2100W
Output power; 1kHz 4ohms 750W x 2
8ohms 525W x 2
8ohms; Bridge 1500W
Output power; 20Hz-20kHz 4ohms 700W x 2
8ohms 500W x 2
8ohms; Bridge 1400W
70V line -
100V line -
120V models XP5000
Dynamic power; 1kHz 20ms nonclip 2ohms 1300W x 2
4ohms; Bridge 2600W
Output power; 1kHz 4ohms 750W x 2
8ohms 525W x 2
8ohms; Bridge 1500W
Output power; 20Hz-20kHz 4ohms 700W x 2
8ohms 500W x 2
8ohms; Bridge 1400W
70V line -
100V line -
230V models XP5000
Dynamic power; 1kHz 20ms nonclip 2ohms 1300W x 2
4ohms; Bridge 2600W
Output power; 1kHz 4ohms 750W x 2
8ohms 525W x 2
8ohms; Bridge 1500W
Output power; 20Hz-20kHz 4ohms 700W x 2
8ohms 500W x 2
8ohms; Bridge 1400W
70V line -
100V line -
240V models XP5000
Dynamic power; 1kHz 20ms nonclip 2ohms 1300W x 2
4ohms; Bridge 2600W
Output power; 1kHz 4ohms 750W x 2
8ohms 525W x 2
8ohms; Bridge 1500W
Output power; 20Hz-20kHz 4ohms 700W x 2
8ohms 500W x 2
8ohms; Bridge 1400W
70V line -
100V line -
General specifications XP5000
Total harmonic distortion Less than 0.1% (20Hz-20kHz; Halfpower), RL=4ohms
Intermodulation distortion Less than 0.1% (60Hz:7kHz=4:1; Halfpower)
Frequency response +0dB, -1.0dB (RL=8ohms, 20Hz - 20kHz)
S/N ratio 103dB
Power band width 10Hz-40kHz
Crosstalk Less than -70dB
Damping factor More than 350
Voltage gain 32dB/26dB / 34.2dB (+4dBu)
Input sensitivity +6.2dBu (32dB), +12.2dBu (26dB), +4dBu
Maximum input voltage +22dBu
I/O Connectors Line input / output ports 2x XLR-3-31 type, 2x Euroblock connector
Speaker output ports 2x speakON, 2x 5-way binding post
Control ports D-sub 15pin
Processors HPF (20Hz/55Hz/OFF, 12dB/Oct)
Protection circuit Load protection Power switch on/off mute, DC-fault: Amplifier shuts down automatically.(Operation not restored automatically), Clip limiting (THD ≥ 0.5%)
Amplifier protection Thermal (Mute the output; heatsink temp ≥ 90°C; Operation not restored automatically), VI limiter (Limit the output, RL ≤ 1ohm)
Power supply protection Thermal (Amplifier shuts down automatically; heatsink temp ≥ 100°C)
Amplifier class EEEngine
Cooling 2x Variable-speed fan
Power requirements Depend on area of purchase; 100V, 120V, 230V or 240V; 50/60Hz
Power consumption Music source equivalent 500W
Idling 35W
Stand-by 5W
Dimensions W 480mm; 18-7/8in
H 88mm; 3-7/16in (2U)
D 456mm; 17-15/16in
Net weight 14.0kg; 30.9lbs
Accessories Owner’s manual, Security cover (with a hex wrench)
 
Yamaha ProAudio
Mixers
Processors
Power Amps
Stereo Power Amps
TX6n (TXn Series)
TX5n (TXn Series)
TX4n (TXn Series)
T5n (Tn Series)
T4n (Tn Series)
T3n (Tn Series)
PC9501N (PC-1N Series)
PC6501N ( PC-1N Series)
PC4801N ( PC-1N Series)
PC3301N ( PC-1N Series)
PC2001N (PC-1N Series)
XP7000 (XP Series)
XP5000 (XP Series)
XP3500 (XP Series)
XP2500 (XP Series)
XP1000 (XP Series)
P7000S (P Series)
P5000S (P Series)
P3500S (P Series)
P2500S (P Series)
MA2030
PA2030
Multi-Channel
Power Amps
XMV4280 (XMV Series)
XMV4140 (XMV Series)
XMV4280-D (XMV Series)
XMV4140-D (XMV Series)
XM4180 (XM Series)
XM4080 (XM Series)
IPA8200
Power Distribution Amps
XH200
Speakers
DAW Systems
PA Systems
Add-On-Effects
Interfaces
Recorders

 

Read our blogs