PVM-14L4

Homepage

PVM-14L4 Color Video Monitor

Features

• 14-inch

•  color video monitor

• HR Trinitron CRT provides a high resolution of 800 TV lines

• EBU standard phosphors

• Beam current feedback circuit for stable color reproduction

• Composite, Y/C, RGB and component (Y/R-Y/B-Y) inputs available as standard

• 1 slot available for optional input adaptors

• Accepts external sync

• Auto setup for chroma, phase and white balance

• Color temperature D65, D93 or user preset selectable

• Built-in H/V delay, underscan, blue only, mono and 3 color tally functions

• Aspect ratio 4:3 and 16:9 switchable

• 4:3 area marker

• Serial and parallel remote control capability

• Auto/manual degaussing *Mountable into an EIA standard rack with the optional rack mounting bracket

• 13 1/8-inch viewable area, measured diagonally.

Supplied Accessories

AC Power Cord (1)

Operation Manual (1)

Optional Accessories

BKM-150CP SDTI-CP/SDI Input Adaptor

BKM-120D SDI 4:2:2 Input Adaptor

BKM-129X Analog Component Input Adaptor

BKM-14L Auto Setup Probe

MB-521 Mounting Bracket

BKM-140M 16:9 Mask

Discontinued

Specifications

General

Color system: PAL, NTSC, SECAM, NTSC4.43

Power requirements: AC 100 to 240 V, 50/60 Hz

Power consumption: 0.9 to 0.5 A, 90 W (with options: 1.0 to 0.6 A, 95 W)

Operating temperature: 0 to 35 °C (32 to 95 °F)

Storage temperature: -10 to 40 °C (14 to 104 °F)

Humidity: 30 to 85% (no condensation)

Dimensions: Approx. 346 (W) x 280 (H) x 424 (D) mm

(13 5/8 x 11 1/8 x 16 3/4 inches)

Mass: Approx. 17 kg (37 lb 8 oz)

CRT

CRT type: 14-inch HR Trinitron

AG pitch: 0.25 mm

Phosphor: EBU

Effective picture size 4:3: 267.5 (W) x 200.6 (H) mm, 331.6 mm

(diagonal) (10 5/8 x 8 inches, 13 1/8 inches)

16:9: 267.5 (W) x 150.5 (H) mm, 306.9 mm (diagonal)

(10 5/8 x 6 inches, 12 1/8 inches)

Resolution: 4:3: 800 TV lines, 16:9: 600 TV lines

Aperture correction: OFF: 0 dB, ON: 2 to 6 dB

Frequency response: LINE: 10.0 MHz +0 dB/-3 dB (Y signal only)

RGB: 10.0 MHz +0 dB/-3 dB

Synchronization: AFC time constant 1.0 ms

Scanning frequency: 15.625 kHz (PAL, SECAM), 15.734 kHz (NTSC, NTSC4.43)

Normal scan: 7% overscan

Underscan: 5% underscan

Linearity: Horizontal: less than 4%

Vertical: less than 4%

Convergence:

Center: 0.4 mm (typical)

Peripheral: 0.5 mm (typical)

Raster size stability:

Horizontal: 1%

Vertical: 1%

HV regulation: 3.5%

Color temperature: D65, D93, User adjustable

Input/output

LINE A

Composite: Loop-through BNC, 1.0 Vp-p +3 dB/-6

dB, sync negative, automatic 75 .

termination

Y/C*:

Loop-through Mini Din 4-pin, automatic

75 . termination

Y:

1.0 Vp-p, sync negative

C:

0.3 Vp-p (PAL) or 0.286 Vp-p (NTSC)

Audio: Phono, -5 dBu 47 k. or higher

LINE B

Composite: Loop-through BNC, 1.0 Vp-p +3 dB/-6

dB, sync negative, automatic 75 .

termination

Audio: Phono, -5 dBu 47 k. or higher

RGB/Component:

Loop-through BNC, automatic 75 .

termination

G/Y:

0.7 Vp-p +3 dB/-6 dB

Sync on G:

0.3 Vp-p

B/B-Y:

0.7 Vp-p +3 dB/-6 dB

R/R-Y:

0.7 Vp-p +3 dB/-6 dB

External sync:

4.0 Vp-p 6 dB, sync negative, usable

tri-level sync signal 0.6 Vp-p 6 dB

Option slot: x 1

Audio: Phono (x 2), -5 dBu 47 k. or higher

Remote

Parallel remote: Modular 8-pin (assignable)

Serial remote: D-sub 9-pin (RS-485)

Audio output: 0.8 W (distortion: less than 5%)

Regulation compliance

EN 60950, CE (LVD, EMC), C-Tick, CCIB

* The Y/C input has priority over the composite

input.