SHURE
WL50 Wireless Systems

Homepage  |   Azden  |   Zoom  |   Sound Devices  |   Sennheiser  |   Tascam  |   Yamaha  |  JBL  | Mackie  | Audio Technica  | Rode  | SHURE  | Beyerdynamic  | Contact us
Home > SHURE > All Others > WL50  
Microphones
All Others
514B 450 Series II
503BG 512
515 Series 522
527B 561
527C 577B
562 596LB
588SDX VP64
MC50B & MC51B  WCB6
VP88 WCE6i
WCE6 WH20
WCM16 WL183/ WL184/ WL185
WH30 WL51
WL50 104C
WL93 WBH54
WBH53 El Diablo
Naked Eye Proscenium
Recordist Soundstage
SPLx Custom Studio Vocalist
810 Modulink
PG Microphones
SM Microphones
Beta Microphones
KSM Microphones
Microflex
Classic
Wireless System
Performance Gear System
PGX System
PGX Digital Wireless Systems
SLX Series
ULX Standard
ULX Professional
UHF-R-Series
Personal Monitor Systems
PSM 200
PSM 400
PSM 600
PSM 700
PSM 900
PSM 1000
Earphones & Headphones
SE Earphones
Headphones
Music + Mobile
Discussion Systems
C1-Ci
C1-Cs
C1-Di
C1-Ds
C1-PS 30s
C1-PS 60i
Mixers + Digital Signal Processors
DSP
Installed Mixers
Performance Mixers
Field + Mobile

DJ RecordNeedlz +

Hi-Fi Phono Cartridges

Record Needlz
Phono Cartridges
WL50 Professional Subminiature Lavalier Microphones


Product Code:
wl50

Shure's WL50 lavalier microphone series sets a new standard for miniature microphones. Visually unobtrusive, the WL50s are ideal for theater, television broadcast, video/film, and event production. Designed for applications that require minimal visibility without compromising sound quality, these microphones are available individually, as well as with the Shure ULX, UHF and UC Wireless Systems.

Features
  • All models include foam windscreens, swiveling lapel clip, dual tie clip, magnet mount, and mini mount
  • Subminiature size (5.8 mm diameter x 11 mm height)
  • Electret condenser cartridge
  • Omnidirectional pattern
  • One termination: 4-pin mini connector (fits directly into Shure wireless transmitters)
  • Two sensitivities available:
    Standard: -40 dBV/Pa (for speech applications)
    Reduced: -50 dBV/Pa (10 dB more headroom for theater applications)
  • Interchangeable equalization caps for optimal clarity and response:
  • Silver mesh cap provides a 4 dB boost in the 8-18 kHz range - typically used in applications that require a microphone to be head-mounted
  • Gold mesh cap provides a 10 dB boost centered at 12 kHz - typically used in applications that require a chest-worn microphone
  • Black, beige, and white models are available
  • All models include magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens
  • Frequency response: 20-20,000 Hz

Specification
 
SPECIFICATIONS WL50
Measured with test circuit (see User Guide)
WL50-LO
Measured with test circuit (see User Guide)
MC50
Measured with RPM626 Preamplifier
WL51
Measured with test circuit (see User Guide)
MC51
Measured with RPM626 Preamplifier
Condenser (electret bias) Condenser (electret bias) Condenser (electret bias) Condenser (electret bias) Condenser (electret bias) Condenser (electret bias)
Polar Pattern Omnidirectional Omnidirectional Omnidirectional Cardioid Cardioid
Output Impedance N/A N/A 136 ohms actual (rated at 150 ohms) N/A 136 ohms actual (rated at 150 ohms)
Recommended Min.
Input Impedance
20 kilohms 20 kilohms N/A 20 kilohms N/A
Output Level �45.0 dBV/Pa
(1 Pa=94 dB SPL)
�54.0 dBV/Pa
(1 Pa=94 dB SPL)
�41.0 dBV/Pa
(1 Pa=94 dB SPL)
�50.0 dBV/Pa
(1 Pa=94 dB SPL)
�46.0 dBV/Pa
(1 Pa=94 dB SPL)
Maximum SPL 133 dB at 1% THD/
20 kilohm load
142 dB at 1% THD/
20 kilohm load
138 dB at 1% THD/
1 kilohm load
138 dB at 1% THD/
20 kilohm load
143 dB at 1% THD/1 kilohm load
Frequency Response 20 to 20,000 Hz 20 to 20,000 Hz 20 to 20,000 Hz 20 to 20,000 Hz 20 to 20,000 Hz
Dynamic Range 103.0 dB 103.0 dB 108.0 dB 103.0 dB 108.0 dB
Output Noise
(equivalent SPL, A-weighted)
30 dB typical; 33 dB maximum 39 dB typical; 42 dB maximum 30 dB typical; 33 dB maximum 35 dB typical; 38 dB maximum 35 dB typical; 38 dB maximum
Signal-to-Noise Ratio 64 dB at 94 dB SPL 55 dB at 94 dB SPL 64 dB at 94 dB SPL 59 dB at 94 dB SPL 59 dB at 94 dB SPL
Power Requirements +5 Vdc on pin 2, return on pin 1 (ground). +5 Vdc on pin 2, return on pin 1 (ground). 11 to 52 Vdc (positive on pins 2 and 3, return on pin 1). +5 Vdc on pin 2, return on pin 1 (ground). 11 to 52 Vdc (positive on pins 2 and 3, return on pin 1).
Current Drain 60�130 µA 60�130 µA 4.6 mA 60�130 µA 4.6 mA
Polarity�Positive pressure on
the diaphragm produces a
positive voltage at:
Pin 3 relative to pin 1 at the output connector of the microphone. pin 2 relative to pin 3 of the output
connector of preamplifier.
pin 3 relative to pin 1 at the
output connector of the
microphone.
pin 2 relative to pin 3 of the output
connector of preamplifier.
Overvoltage Protection N/A N/A +/- 75.0 Vdc maximum from pins
2 and 3 to pin 1.
N/A +/- 75.0 Vdc maximum from pins
2 and 3 to pin 1.
Cap and Overmold Material Polypropylene
Environmental Conditions Operating Temperatures: �18 to 57 degrees C (0 to 135 degrees F)
Storage Temperatures: �29 to 74 degrees C (�20 to 165 degrees F)
Humidity: 0 to 95%
Packaged Weight 188 g (6.63 oz.) 188 g (6.63 oz.) 305 g (10.76 oz.) 188 g (6.63 oz.) 305 g (10.76 oz.)
Cable and Connector 1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).
WL50X: 3 m (10 ft.)
small-diameter, shielded, with
stripped and tinned leads.
1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).
WL50X�LO: 3 m (10 ft.)
small-diameter, shielded, with
stripped and tinned leads.
1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).
1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).
1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).
Microphone and Preamp
Dimensions
See User Guide
Net Weight WL50: 21 g (0.7 oz.) with cable
and connector.
WL50X: 28 g (1.0 oz.) with 3 m
(10 ft.) stripped and tinned
cable.
WL50�LO: 21 g (0.7 oz.) with
cable and connector.
WL50X�LO: 28 g (1.0 oz.) with
3 m (10 ft.) stripped and tinned
cable.
121 g (4.3 oz.) with cable,
connector, and preamplifier.
WL51 21 g (0.7 oz.) with cable
and connector.
121 g (4.3 oz.) with cable,
connector, and preamplifier.

Read our blogs