|
|
| P2RE2
Wired Personal Monitor System |
|
|
Product Code: p2re2
|
Whether
you're playing live or rehearsing, you need to hear yourself to be
your best. That's what monitoring is all about. Yet some performers
still struggle with booming floor wedge monitors and loud stage
volume. Introducing the PSM®200 - the personal monitoring
break through that performers have been waiting for. Featuring
smart, versatile components that grow with you as your needs
change, the PSM 200 series is a practical alternative to floor
wedges for performers who want to start out In Ear and stay
there.
The P2R Hybrid Bodypack Receiver is the world's first bodypack
receiver to function as a wired receiver, a wireless receiver, or
both at the same time. This and other unique features, along with
excellent sound quality, make the P2R an exceptional value.
The PSM 200 model P2RE2 is a wired personal monitor system
featuring the P2R Hybrid Bodypack Receiver and the clear SCL2 Sound
Isolating Earphones. |
|
| Features |
- Can operate as a wired or
wireless bodypack, or both simulaneously
- Frequency
locator
- Built-in headphone
limiter
- Integrated cable
management
- High-impact plastic
chassis
- 1/4" Line input jack with
high/low gain switch
|
|
| Specifications |
- PSM200 System
- RF Carrier Frequency Range: 518
-865 MHz (country dependent)
- Operating Range: 100 m (300 ft.)
under optimal conditions
- Audio Frequency Response: 30 Hz
to 12 kHz (+/ 3 dB); earphone dependent
- Total Harmonic Distortion (1
kHz): <1% typical (Ref. +/- 35 kHz deviation)
- Modulation: FM +/- 35 kHz
Deviation (Nominal)
- Signal-to-Noise Ratio: 80 dB
typical (A-weighted)
- Operating Temperature: -7
degrees C to +49 degrees C (+20 degrees F to +120 degrees
F)
- P2R Receiver
- RF Sensitivity: 109 dBm
typical
- Squelch Threshold: 102 dBm
typical
- Antenna: Attached
Whip
- Connector Type: 1/4-inch
Mono
- Impedance: 1
megohm
- Maximum Input Level: LO = +0
dBu; HI = 10 dBu
- Frequency Response: 30 Hz to 20
kHz (+/ 3 dB); earphone dependent
- Power Requirements: 9 V alkaline
battery, Duracell® type MN1604 recommended
- Battery Life: Volume
Dependent
- Wired (RF Off): 6
hours
- Wireless (RF On): 4
hours
- Audio Output Connector: 1/8 inch
(3.5 mm)
- Minimum Load Impedance: 8
ohms
- Net Weight: 100 g (3.52 oz.),
less battery
- Overall Dimensions: 122 mm x 73
mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)
- SCL2 Sound Isolating Earphones
Specifications
- Frequency Range: 22Hz -
17.5kHz
- Sensitivity (at 1 kHz): 105 dB
SPL/mW
- Weight: 30g
(1oz)
- Impedance (at 1 kHz) 16
ohms
- Output Connector: Gold-plated
stereo, 3.5 mm (1/8-inch)
- Cable Length: 1.57 m (62
inches)
|
|
|
