SHURE
PGXD4 Wireless Receiver

Homepage  |   Azden  |   Zoom  |   Sound Devices  |   Sennheiser  |   Tascam  |   Yamaha  |  JBL  | Mackie  | Audio Technica  | Rode  | SHURE  | Beyerdynamic  | Contact us
Home > SHURE > PGDX System > PGXD4 Wireless Receiver  
Wireless Systems
PGXD System
PGX Digital Wireless
PGXD4
PGXD2
PGXD1
PGXD24/SM86
PGXD24/SM58
PGXD24/PG58
PGXD24/BETA58A
PGXD14/93
PGXD14/85
PGXD14
PGXD14/PG30
PGXD14/BETA98H
Performance Gear System
PGX System
PGX Digital Wireless Systems
SLX Series
ULX Standard
ULX Professional
UHF- R - Series
Microphone
PG Microphones
SM Microphones
Beta Microphones
KSM Microphones
Microflex
Classic
All Others
Personal Monitor Systems
PSM 200
PSM 400
PSM 600
PSM 700
Earphones
Earphones & Headphones
SE Earphones
Headphones
Music + Mobile
Discussion Systems
C1-Ci
C1-Cs
C1-Di
C1-Ds
C1-PS 30s
C1-PS 60i
Mixers + Digital Signal Processors
DSP
Installed Mixers
Performance Mixers
Field + Mobile

DJ RecordNeedlz +

Hi-Fi Phono Cartridges

Record Needlz
Phono Cartridges

PGXD4 Wireless Receiver



Product Code:
PGXD4

The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap.

Features
  • 24-bit / 48kHz digital technology for incredibly accurate sound
  • Automatic frequency selection locates a clear channel instantly
  • One-touch sync automatically syncs the transmitter and receiver
  • True digital diversity for rock-solid wireless signal reliability
  • Up to 5 compatible channels per frequency band
  • 1/4" and XLR audio outputs
  • Included padded carrying case for portability and protection
Specifications
  • Dimensions: 40 mm H X 181 mm W X 104 mm D (1.6 x 7.125 x 4.1 in.)
  • Weight: 289 g (10.2 oz.)
  • Housing: ABS
  • Audio Output Level
    (ref. ± 38 kHz deviation, 1 kHz tone)
    XLR connector (into 3000 Ω load): -2.5 dBV
    1/4 inch connector (into 10000 Ω load): +10 dBV
  • Impedance
    XLR: 50 Ω
    1/4 inch: 50 Ω
  • Sensitivity: -102 dBm @ 10-5 BER
  • Image Rejection: > 70 dB, typical
  • XLR Output
    Impedance balanced
    Pin 1: Ground (cable shield)
    Pin 2: Audio
    Pin 3: No Audio
  • Audio LED
    Red: 2 dB below clip, Amber: 12 dB below clip,
    Green: 50 dB below clip
  • Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
  • Pin Assignments
    XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4")
    TRS: Tip=audio, Ring=no audio,Sleeve=ground

Read our blogs