SHURE
SM10A Headworn Microphone Performance Microphones

Homepage  |   Azden  |   Zoom  |   Sound Devices  |   Sennheiser  |   Tascam  |   Yamaha  |  JBL  | Mackie  | Audio Technica  | Rode  | SHURE  | Beyerdynamic  | Contact us
Home > SHURE > SM Microphone> SM10A Headworn Microphone  
Microphones
SM Microphones
SM27
SM57
SM57+X2u
SM58
SM58+X2u
SM137
SM86
SM87A
SM48
SM63
SM81
DMK57-52
SM10A
SM11
SM2
SM7B
SM89
SM93
SM94
PG Microphone
Beta Microphone
KSM Microphones
Microflex
Classic
All Others
Wireless Systems
Performance Gear System
PGX System
PGX Digital Wireless Systems
SLX Series
ULX Standard
ULX Professional
UHF- R - Series
Personal Monitor Systems
PSM 200
PSM 400
PSM 600
PSM 700
PSM 900
PSM 1000
Earphones & Headphones
SE Earphones
Headphones
Music + Mobile
Discussion Systems
C1-Ci
C1-Cs
C1-Di
C1-Ds
C1-PS 30s
C1-PS 60i
Mixers + Digital Signal Processors
DSP
Installed Mixers
Performance Mixers
Field + Mobile

DJ RecordNeedlz +

Hi-Fi Phono Cartridges

Record Needlz
Phono Cartridges
SM10A Headworn Microphone


Product Code:
SM10A

The Shure SM10A is a low-impedance, unidirectional dynamic microphone designed for close-talk head-worn applications such as remote-site sports broadcasting and corporate intercom systems. It is also ideal for singing drummers, keyboard artists, and other performers who need a head-worn vocal microphone with superior noise rejection and a smooth, natural-sounding frequency response
 

Features
The SM10A is very lightweight and is typically mounted on the supplied steel headband assembly. An adjustable pivot on the headband assembly allows the microphone boom to be moved 20 degrees in any direction. The boom also slides out so the microphone can be positioned up to 89 mm (3 1/2 in.) from the pivot housing. A supplied windscreen reduces wind noise and explosive breath sounds. Other features:
  • Close-talk design provides excellent isolation and minimizes gain-before-feedback
  • Extremely rugged with fully adjustable headband and microphone boom
  • Unidirectional(cardioid) polar pattern for superior rejection of unwanted sound
  • A clip that fits over the XLR connector and attaches to the user's belt or waistband, providing cable strain relief

Specifications
  • Microphone Type : Dynamic, close-talk
  • Frequency Response (at 8 mm [5/16 in.]) : 50 to 15,000 Hz
  • Polar Pattern : Cardioid, uniform with frequency, symmetrical about axis
  • Impedance : Rated at 150 ohms (223 ohms actual)
  • Sensitivity (1,000 Hz at 8 mm (5/16 in.)
    Open Circuit Voltage: –65.0 dBV/Pa* (0.45 mV)
    *1 Pa = 94 dB SPL
  • Polarity : Positive pressure on diaphragm produces positive voltage on pin 2 of microphone connector.
  • Connector : Professional three-pin male XLR audio connector.
  • Cable : Non-detachable, 1.5 m (5 ft), two-conductor, shielded, plastic-jacketed
  • Case : Black thermoplastic microphone and pivot housing, anodized aluminum end caps, stainless steel grille, and boom
  • Net Weight : 78 grams (2.7 oz) less cable and connector
  • Packaged Weight : 950 grams (2 lbs., 1 1/2 oz)

Read our blogs