RODE MICROPHONES

Home  |  Azden  | Zoom  | Audio Tech  | Sennheiser  | Sound Devices| Tascam  |SHURE  | Yamaha  | Clear-Com  |  Sony  |  Panasonic  | Rode  |  JVC | Contactus  | Visit Us
 Home > RODE > Accessories

Page 1 2 3 4 5 6

RODE MiCon-10  
RODE MiCon-10
Product Code: MICON10
Buy Sell Sales RODE MiCon-10


The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-10 is designed to connect to MIPRO transmitters with 4-pin mini XLR connector. MIPRO is a registered name and trademark owned by MIPRO Electronics.
 

Weight : 10.00gm
Dimensions : 36.00mmH x 13.65mmW x 10.40mmD
Warranty : 1 year


RODE MiCon-11  
RODE MiCon-11
Product Code: MICON11
Buy Sell Sales RODE MiCon-11


The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-11 is designed to connect to TRRS devices such as the iPhone, iPad, iPod touch and select Android devices.
 

Weight : 7.00gm
Dimensions : 1200.00mmH x 9.00mmW x 9.00mmD
Warranty : 1 year


RODE MiCon-2  
RODE MiCon-2
Product Code: MICON2
Buy Sell Sales RODE MiCon-2


The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-2 is designed to connect to a standard 3.5mm stereo minijack, with a power supply of 1V minimum.
 

Weight : 8.00gm
Dimensions : 37.00mmH x 10.00mmW x 10.00mmD
Warranty : 1 year


RODE MiCon-3  
RODE MiCon-3
Product Code: MICON3
Buy Sell Sales RODE MiCon-3


The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-3 is designed to connect to Shure transmitters UR1, UR1M, ULX1, SLX1, PGX1 and PG1. Shure and the Shure products listed are registered names and trademarks owned by Shure.
 

Weight : 10.00gm
Dimensions : 36.00mmH x 13.65mmW x 10.40mmD
Warranty : 1 year


RODE MiCon-4  
RODE MiCon-4
Product Code: MICON4
Buy Sell Sales RODE MiCon-4


The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-4 is designed to connect to Audio Technica UniPakTM Body-Pack transmitters 1800, 2000 and 3000. Audio Technica, Uni-Pak and the Audio Technica products listed are registered names and trademarks owned by Audio Technica.
 

Weight : 13.00gm
Dimensions : 36.00mmH x 11.60mmW x 11.60mmD
Warranty : 1 year


RODE MiCon-5  
RODE MiCon-5
Product Code: MICON5
Buy Sell Sales RODE MiCon-5


The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3 pin XLR, with P48 phantom power.
 

Weight : 50.00gm
Dimensions : 61.80mmH x 30.10mmW x 21.00mmD
Warranty : 1 year


RODE MiCon-6  
RODE MiCon-6
Product Code: MICON6
Buy Sell Sales RODE MiCon-6


The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-6 is designed to connect to AKG transmitters PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000, as well as the Audix RAD-360. AKG, Audix and the AKG and Audix products listed are registered names and trademarks of their respective owners.
 

Weight : 10.00gm
Dimensions : 36.00mmH x 13.00mmW x 10.50mmD
Warranty : 1 year


RODE MiCon-7  
RODE MiCon-7
Product Code: MICON7
Buy Sell Sales RODE MiCon-7


The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-7 is designed to connect to Lectrosonics transmitters SM Series, UMa Series, LMa Series and UM450. Lectrosonics and the Lectrosonics products listed are registered names and trademarks owned by Lectrosonics Inc.
 

Weight : 10.00gm
Dimensions : 36.00mmH x 13.00mmW x 10.50mmD
Warranty : 1 year


RODE MiCon-8  
RODE MiCon-8
Product Code: MICON8
Buy Sell Sales RODE MiCon-8


The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-8 is designed to connect to Sony UWP transmitters. Sony and the Sony products listed are registered names and trademarks owned by Sony Corp.
 

Weight : 10.00gm
Dimensions : 39.00mmH x 10.00mmW x 10.00mmD
Warranty : 1 year


RODE MiCon-9  
RODE MiCon-9
Product Code: MICON9
Buy Sell Sales RODE MiCon-9


The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-9 is designed to connect to the Sennheiser transmitters SK 2000 and SK 5000 Sennheiser and the Sennheiser products listed are registered names and trademarks owned by Sennheiser.
 

Weight : 10.00gm
Dimensions : 1200.00mmH x 9.00mmW x 9.00mmD
Warranty : 1 year


RODE Micro Boompole Pro  
RODE Micro Boompole Pro
Product Code: MICROBOOMPOLEPRO
Buy Sell Sales RODE Micro Boompole Pro

Compatible Accessories: VideoMic, Stereo VideoMic, VideoMic Pro, VideoMic GO, Pivot Adaptor, Stereo VideoMic X, VideoMicro, Boompole Pro


The Micro Boompole Pro is a unique, modular booming device that allows location sound engineers to capture audio in confined or difficult spaces.

Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine to a maximum length of 2.2m (7’2”). Using an industry standard 3/8” thread, these sections can also be used to extend the Boompole Pro to reach to over 3.7m (12').
 


RODE MiniFur-HS1  
RODE MiniFur-HS1
Product Code: MINIFURHS1
Buy Sell Sales RODE MiniFur-HS1


The MINIFUR-HS1 is an artificial fur wind shield designed for us on the HS1 headset microphone in outdoor or high wind conditions. The MINIFUR-HS1 is supplied in a pack of three.

 

Weight : 1.00gm
Dimensions : 26.00mmH x 44.00mmW x 44.00mmD
Warranty : 1 year

 


RODE MINIFUR-LAV  
RODE MINIFUR-LAV
Product Code: MINIFURLAV
Buy Sell Sales RODE MniFur-LAV


The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three.

 

Weight : 1.00gm
Dimensions : 26.00mmH x 44.00mmW x 44.00mmD
Warranty : 1 year

 


RODE NT45-C  
RODE NT45-C
Product Code: NT45C
Buy Sell Sales RODE NT45-C


The NT45-C is an interchangeable cardioid capsule for the NT4, NT5, NT55 or NT6 microphones.

 

Weight : 14.00gm
Dimensions : 16.50mmH x 20.00mmW x 20.00mmD
Warranty : 1 year

 


RODE NT45-O  
RODE NT45-O
Product Code: NT45O
Buy Sell Sales RODE NT45-O


The NT45-O is an interchangeable omni capsule for the NT5, NT55 or NT6 microphones. As the omni polar pattern is designed for equal sensitivity on all sides, use it when you want to pick up a more overall 'room' sound.

 

Weight : 14.00gm
Dimensions : 16.50mmH x 20.00mmW x 20.00mmD
Warranty : 1 year

 


RODE PG1  
RODE PG1
Product Code: PG1
Buy Sell Sales RODE PG-1


The PG1 Cold Shoe Pistol Grip is a convenient and ergonomic way to operate your RØDE VideoMic, Stereo VideoMic, or any other cold-shoe device independently of your video camera. A convenient 3/8” thread on the base allows connection to a boompole or microphone stand, while the spine features handy cable management.

 

Weight : 82.00gm
Dimensions : 132.00mmH x 34.00mmW x 43.00mmD
Warranty : 1 year

 


RODE PG2  
RODE PG2
Product Code: PG2
Discontinued


The RØDE PG2 Pistol Grip Shock Mount is designed to reduce handling noise when recording with shotgun microphones. It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts, and a handy release lever on the mount allows for quick and easy adjustment of the microphone angle. Cable management is an integral design feature of the PG2 pistol grip, with the cable running through the handle assembly to minimise any handling noise or clutter. Additional cable security is provided on either side of the rubber shock mount. The PG2 can be operated by hand or attached to a boompole via the 3/8" thread attachment at the base.

 

Weight : 200.00gm
Dimensions : 215.00mmH x 65.00mmW x 95.00mmD
Warranty : 1 year

 

Live Microphones
S1
M1
M1-S
M2
M3
Studio Microphones
M5
NT-USB
NT-1
NT1-A
NT-1000
NT2-A
NT-2000
NT-3
NT-4
NT-5
NT-55
NT-6
Classic II
K2
NTK
NTR
NT-SF1
Shotgun Microphones
NTG1
NTG2
NTG3
NTG4
NTG4+
NTG8
NTG5 Recording Kit
Videomic NTG
AVX Series
AVX-MKE2
AVX-ME2
AVX-835
AVX-COMBO
SK AVX-3
EKP AVX-3
SKM AVX-835
SKM AVX-835S-3
Broadcast Microphones
Broadcaster
Podcaster
Procaster
Reporter
Wearables
HS-1
Lavalier
PinMic
Video Microphones
VideoMic Me
VideoMicro
Stereo VideoMic
Stereo VideoMic Pro
Stereo VideoMic X
VideoMic
VideoMic Pro
VideoMic Go
VideoMic Me-L
iOS Microphones
i-XY (Lightning Version)
smartLav+
SC6-L
SC6-L Kit
RODELInk
Filmmaker Kit
Wireless Go
Accessories
PSM1
SM1
SM2
SM3
SM4
SM5
WS2
Dead Cat
WS6
WS7
Boompole
Boompole Bag
PSA1
SM6
Blimp
Deadcat VMP
Deadkitten
WS8
Mini Boompole
Micro Boompole

Read our blogs