| |
|
5006-11 Surround Microphone
Kit
The 5006-11,
4006-TL/4011-TL Surround Microphone Kit consists
of:
3 x 4006-TL Omnidirectional Microphones, P48, Transformerless
(match within ±0.5 dB in sensitivity and frequency response in
the microphone’s entire frequency range)
3 x
L50B Acoustic Pressure Equalizers, 50 mm (1.97 in)
Ball
3 x
UA0961 Microphone Holder
3 x DD0251 Free-field Grid, Silver
2 x 4011-TL Cardioid Microphones, P48 (match
within ±1 dB in sensitivity and frequency response in the
microphone’s entire frequency range)
2 x
UA0898 Shock Mounts
2 x DD0297 Diffuse-field Grid, Black
2 x UA0896 Windscreen
1 x
PSM5000 Protractor for Shock Mount
Intended for use in
Decca Tree front/backwards faced cardioids rear configuration, this
kit offers:
The Decca Tree advantages: more vivid dynamics and clarity due to
its closer placement
The excellent sound color and authentic reproduction that is unique
for omni microphones
Full frequency range in front channels
Relatively little direct signal in rear channels; avoiding the
front sound sources from sounding too close or even behind
you
|
|
General
Specifications |
|
Directional characteristics: |
4006-TL: Omnidirectional,
4011-TL: Cardioid |
| Principle of
operation: |
4006-TL: Pressure, 4011-TL:
Pressure gradient |
|
Cartridge type: |
4006-TL:16 mm (0.63 in)
pre-polarized condenser, 4011-TL: 19 mm (0.75 in) pre-polarized
condenser |
| Frequency
range: |
4006-TL: 15 Hz – 20 kHz,
4011-TL: 40 Hz – 20 kHz |
|
Sensitivity, nominal +/- 2 dB at 250
Hz: |
4006-TL: 35 mV/Pa; -29 dB re. 1
V/Pa, 4011-TL: 10 mV/Pa; -40 dB re. 1 V/Pa |
| Equivalent noise level,
A-weighted: |
4006-TL: Typ. 15 dB(A) re. 20
µPa (max. 17 dB(A)), 4011-TL: Typ. 19 dB(A) re. 20 µPa
(max. 20 dB(A)) |
|
Equivalent noise level, ITU-R
BS.468-4: |
4006-TL: Typ. 27 dB (max. 29
dB), 4011-TL: Typ. 25 dB (correct with the attenuator in 0 dB or
-20 dB setting) |
| S/N ratio (A-weighted),
re. 1 kHz at 1 Pa (94 dB SPL): |
4006-TL: 79 dB, 4011-TL: 75
dB(A) |
|
Total Harmonic Distortion
(THD): |
4006-TL: <0.5% THD up to 129
dB SPL peak, <1% THD up to 135 dB SPL peak. 4011-TL: <0.5% up
to 110 dB SPL peak, <1% up to 116 dB SPL peak |
| Dynamic
range: |
4006-TL: Typ. 120 dB, 4011-TL:
Typ. 97 dB |
|
Max. SPL, peak before
clipping: |
4006-TL: 143 dB, 4011-TL: 158
dB |
| Output
impedance: |
4006-TL: <200 Ohm, 4011-TL:
<200 Ohm |
|
Cable drive capability: |
4006-TL: Up to 100 m (328 ft),
4011-TL: Up to 100 m (328 ft) |
| Power
supply: |
4006-TL: Phantom P48, 4011-TL:
48 V Phantom power |
|
Attenuators, filters etc.: |
4011-TL: 0 dB, -20
dB |
| Connector: |
4006-TL: 3-pin XLR-M
(Standard P48), 4011-TL: 3-pin XLR-M (Standard
P48) |
| Weight: |
4006-TL: 150 g (5.29 oz),
4011-TL: 165 g (5.82 oz) |
| Capsule
diameter: |
4006-TL: 16 mm (0.63
in), 4011-TL: 19 mm
(0.75) |
|
Microphone length: |
4006-TL: 165 mm (6.5 in),
4011-TL: 175 mm (6.89 in) |
| Temperature
range: |
4006-TL: -10 to +70° C (+14
to 158° F), 4011-TL: -10 to +70° C (+14 to 158°
F) |
|
| |
|
|
|
