DPA Audio

DPA Pro Audio
4041-SP Large Diaphragm Microphone, P48

Home > DPA Pro Audio > Other Microphones > Other Omnidirectional Microphones > 4041-SP Large Diaphragm Microphone, P48  
 
  4041-SP Large Diaphragm Microphone, P48
 

Product Code:4041SP
 LaCie d2 Network 2 301504

 Model:4041SP
 Other Microphones - Omnidirectional

The 4041-SP is designed to work in a standard 48 V phantom power environment. Since the capsule is the same as for the high voltage alternative 4041-S, the 4041-SP offers the same superior sound quality, with very slight changes in the specifications.

 
 
 
   
 

4041-SP Large Diaphragm Microphone, P48

  • the ultimate vocal mic

  • handles high sound pressure levels with no distortion

  • natural and transparent sound

The 4041-SP is designed to work in a standard 48 V phantom power environment. Since the capsule is the same as for the high voltage alternative 4041-S, the 4041-SP offers the same superior sound quality, with very slight changes in the specifications.

The cartridge MMC4041 can be unscrewed from the preamplifier which allows for the exchange of the preamplifier module. It is therefore always possible to upgrade to the high voltage preamplifier, also using the DPA mic amp HMA5000.

The frequency response has a 4-6 dB soft lift around 8 kHz and matches the response of the legendary 4040 Hybrid Microphone. This microphone offers a totally transparent audio path with an exceptionally low noise floor of maximum 8 dB(A) and a SPL handling capability of 134 dB SPL peak.

General Specifications
Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: 24 mm (1 in) condenser w. stainless steel diaphragm
Frequency range, ± 2 dB: 20Hz - 20kHz with 4 - 6 dB soft boost at 8 kHz
Sensitivity, nominal, ±2 dB: 70 mV/Pa; -26dB re. 1 V/Pa
Equivalent noise level A-weighted: Max. 8 dB(A) re. 20 µPa
Equiv. noise level ITU-R BS.468-4: Max. 20 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 86 dB
Total harmonic distortion (THD): <0.5% THD up to 120 dB SPL peak, <1% THD up to 126 dB SPL peak
Dynamic range: Typ. 118 dB
Output impedance: <200 Ohm
Max. SPL, peak before clipping: 134 dB
Cable drive capability: Up to 100 m (328 ft)
Current consumption: 2.20 mA
Connector: 3-pin XLR-M (Standard P48)
Weight: 190 g (6.7 oz)
Length: 170 mm (6.7 in)

     

 

  Other Microphones
  Cardioid Microphones
  Microphone Kits
  Omnidirectional Microphones
  4003 Omni Microphone, 130V
  4004 Reference Microphone, 130 V
  4006-TL Omni Microphone, P48
  4006-TLX Microphone Upgrade 4006-TL
  4007 Reference Microphone, P48
  4041-S Large Diaphragm Microphone
  4041-SP Large Diaphragm Microphone
  4041-T2 Large Diaphragm Microphone
  4051/52/53 Compact Omnidirectional
  Wide Cardioid Microphones
  Miniatures
  Boundary Layer Microphones
  Miniature Directional Microphones
  Miniature Microphone Kits
  Miniature Omnidirectional Microphones
  Headbands
  4065 Omnidirectional Headband
  4066 Omnidirectional Headband
  4067 Omnidirectional Headband
  4088 Cardioid Headband
  Live Instrument Mics
  4090 Omni Mic, Hi-Sens, P48
  4091 Omni Mic, Low Sens, P48
  4099B Clip Microphone
  4099C Clip Microphone
  4099D Clip Microphone
  4099G Clip Microphone
  4099P Stereo Microphone System
  4099S Clip Microphone
  4099T Clip Microphone
  4099U Universal Clip Microphone
  4099V Clip Microphone
  Reference Standard
  Accessories
  Capsules
  Microphones
  Preamplifiers
  Surround
  Multichannel Solutions
  Surround Matched Microphone Kits
  Accessories
  Adapters
  Accessory Kits
  Acoustic Equalizers
  Amplifiers and Power Supplies
  Cables
  Cases
  Concealers
  Grids
  Headband Booms and Mounts
  Holders and Suspension
  Microphone Summation System
  Preamps and Capsules
  Stands  
  Stereo Booms
  Surround Accessories
  Tape
  Tools 
  Windscreens
 

Read our blogs