DPA d:dicate™ 4004 Reference Microphone, 130
V |
![DPA 4004 Reference Microphone DPA d:dicate 4004](d-dicate/4004.jpg)
Product Code:
4004
![DPA 4004 Reference Microphone Buy Sell Sales DPA 4004](../../../images/order_but1.jpg)
![](../../../contact/review_but.jpg)
|
• measurement
microphone
• unbeatable dynamic range
• close miking recording situations regardless of the sound
source
• specially designed to handle extremely high sound pressure
levels
The 4004 is an omnidirectional hi-voltage (130 V) close miking
specialist with an extended on-axis frequency response from 10 Hz
to 40 kHz (±2 dB).
An ideal measurement mic, the 4004 is a reference condenser
microphone specially designed to handle extremely high sound
pressure levels - up to 168 dB SPL before clipping occurs.
It has an unbeatable dynamic range of 124 dB from the noise floor
to 1% THD and an extended headroom of 20 dB up to clipping level
due to the special hi-voltage powering system.
The 4004 is acoustically identical with the reference microphone
Type 4007, but differs in the powering system and the fact that the
4004 has a transformerless output.
4004 is totally transparent and is the perfect choice in all close
miking recording situations regardless of the sound source.
|
Directional
characteristics: |
Omnidirectional |
Principle of
operation: |
Pressure |
Cartridge
type: |
12 mm (0.47 in) pre-polarized
condenser |
Frequency
range,
± 2 dB: |
10 Hz - 40 kHz |
Sensitivity,
nominal, ±2 dB: |
10 mV/Pa; -40dB re. 1V/Pa |
Equivalent noise
level A-weighted: |
Typ. 24 dB(A) re. 20 µPa (max. 26
dB(A)) |
Equiv. noise level
ITU-R BS.468-4: |
Typ. 36 dB (max. 38 dB) |
S/N ratio, re. 1 kHz
at 1 Pa (94 dB SPL): |
70 dB |
Total harmonic
distortion (THD): |
<0.5% up to 142 dB SPL peak, <1% up to 148
dB SPL peak |
Dynamic
range: |
Typ. 124 dB |
Output
impedance: |
<75 ohm |
Max. SPL, peak
before clipping: |
168 dB SPL peak (f<4 kHz) |
Cable drive
capability: |
From microphone to HMA5000: Up to 20 m (6 ft)
From HMA5000: Up to 300 m (984 ft) |
Power
supply: |
130 V via HMA5000 |
Connector: |
4-pin modified XLR-M (High
Voltage) |
Weight: |
150 g (5.29 oz) |
Current
consumption: |
2.60 mA |
Capsule
diameter: |
12 mm (0.47 in) |
Length: |
165 mm (6.5 in) |
Operating
temperature range: |
-40 to +55°C (-40 to
131°F) |
|
|
|
|
|