DPA IMK-SC4061 Microphone Kit

DPA IMK-SC4061

Instrument Microphone Kit

Home > DPA Pro Audio > d:screet Miniature > IMK-SC4061  
 
 DPA IMK-SC4061 Instrument Microphone Kit with 4061

DPA IMK-SC4061
Product Code: IMKSC4061
Buy Sell Sales DPA IMK-SC4061

 

Containing a d:screet™ SC4060 Miniature Microphone with DPA reinforced cable relief and a XLR adapter DAD6001-BC with a selection of our unique mounting accessories, this kit is designed to use as a close miking solution for a wide variety of musical instruments. The SC4060 microphone offers a very clean, detailed and natural sound quality, leaving placement up to the user, in order to receive the desired timbre for studio use or amplification for live use.

Included are holders for strings, universal surface mounts with double sided tape, a magnet mount and foam windscreens.

The SC4061 can handle 144 dB peak before clipping, allowing the microphone to be used even for snare drums, guitar/bass speaker cabinets or other high SPL sound sources.

For maximum versatility, the DPA adapter system makes it possible to use the SC4061 with close to any professional wireless system available.

Also available as IMK-SC4060 with a d:screet™ SC4060 Miniature Omnidirectional Microphone, Hi-Sens.

This microphone kit is made for film or TV production where the microphone needs to be invisible.
• 1 x SC4061 Omnidirectional Mic, Lo-Sens
• 1 x DAD6001-BC Adapter, MicroDot to 3-pin XLR (P48) w. Belt Clip
• 1 x DMM0002-B Miniature Double Pin
• 1 x DMM0007 Universal Surface Mount, 5 pcs.
• 1 x DMM0011-B Magnet Mount
• 1 x DUA0560 Windscreens, Black, 5 pcs.
• 2 x Microphone Holder for Strings

The IMK-SC4061 kit is still available with the original d:screet™ 4061 Miniature Mics without the reinforced cable relief upon request.
 Directional characteristics:  Omnidirectional
 Principle of operation:  Pressure
 Cartridge type:  Pre-polarized condenser element with vertical diaphragm
 Frequency range, ± 2 dB:  Soft Boost Grid: 20 Hz-20 kHz ±2 dB, 3 dB soft boost at 8-20 kHz
 Sensitivity, nominal, ±3 dB:  6 mV/Pa; -44.5 dB re. 1 V/Pa
 Equivalent noise level A-weighted:  Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
 Equiv. noise level ITU-R BS.468-4:  Typ. 38 dB (max. 40 dB)
 S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):  Typ. 68 dB(A)
 Total harmonic distortion (THD):  <1% THD up to 123 dB SPL peak
 Dynamic range:  Typ. 97 dB
 Max. SPL, peak before clipping:  144 dB
 Output impedance:  30-40 Ohm
 Cable drive capability:  Up to 300 m (984 ft)
 Power supply:  For wireless systems: Min. 5 V – max. 50 V through DPA adapter; with DAD6001: 48 V phantom power ±4 V.
 Connector:  MicroDot
 Weight:  <7.5 g (0.26 oz) incl. cable and MicroDot connector
 Microphone length:  12.7 mm (0.5 in)
 

 

Products
d:fine Headsets
d:vote™ 4099
d:facto Vocal
d:screet™ Miniature
Miniature Omnidirectional Mics
4060 Omnidirectional
4061 Omnidirectional
4062 Omnidirectional
4063 Omnidirectional
4071 Omnidirectional
4090 Omnidirectional
4091 Omnidirectional
Heavy Duty 4060 Omnidirectional
Heavy Duty 4061 Omnidirectional
Heavy Duty 4071 Omni
Necklace Microphone
Miniature Directional Mics
4080 Miniature Cardioid
4081 Miniature Super Cardioid
Miniature Microphone Kits
EMK-SC4071
FMK-SC4071
IMK-SC4060
IMK-SC4061
LMK-SC4060
SMK-SC4060
SMK-SC4061
Boundary Layer Microphone
BLM4060
Miniature Directional Mics
SC4098
d:dicate™ Recording Mics
Adapters
Accessories