DPA Heavy Duty 4060 Microphone

DPA d:screet™ Heavy Duty 4060

Omni Microphone, Hi-Sens

Home > DPA Pro Audio > d:screet Miniature > Heavy Duty 4060 Omnidirectional, Hi-Sens  
 
 DPA d:screet™ Heavy Duty 4060 Omnidirectional Microphone, Hi-Sens

DPA d:screet Heavy Duty 4060
ProductCode: HEAVYDUTY4060
Buy Sell Sales DPA Heavy Duty 4060


 

The d:screet™ Heavy Duty is DPA's toughest miniature microphone. Made for situations where you require the maximum amount of security and where the visual size is of less importance, the d:screet Heavy-duty which features a stainless steel housing, a heavy-duty cable relief and a thick 2.2 mm cable.

Originally designed for use with wireless systems in theater, television and close-miked instrument applications, the d:screet™ Heavy Duty 4060 Miniature Omnidirectional Microphone exhibit an exceedingly accurate omnidirectional pattern and therefore do not need to be aimed directly at the sound source to achieve quality pickup.

The d:screet™ series of Miniature Omnidirectional Microphones are the versatile workhorses that adapts to your needs. With eminent sound quality, a large range of accessories, and adapters available for all pro wireless systems, the d:screet Miniature Omni Mics are the obvious choice for any application requiring a big sound and a small footprint.

The d:screet Heavy Duty Omnidirectional Miniature Microphone comes with either our 4060 high sensitivity or our 4061 low sensitivity capsule and in either black or beige.

Features:
• Exceptional audio quality with low noise and high sensitivity
• Stainless steel housing, heavy-duty cable relief and thick 2.2 mm cable for maximum durability
• Adapts to all pro wireless systems
• Large selection of accessories
 
 Directional characteristics:  Omnidirectional
 Principle of operation:  Pressure
 Cartridge type:  Pre-polarized condenser element with vertical diaphragm
 Frequency range, ± 2 dB:  Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz.
 High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz.
 Sensitivity, nominal, ±3 dB at 1 kHz:  20 mV/Pa; -34 dB re. 1 V/Pa
 Equivalent noise level A-weighted:  Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
 Equiv. noise level ITU-R BS.468-4:  Typ. 35 dB (max. 38 dB)
 S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):  71 dB(A)
 Total harmonic distortion (THD):  <1% up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine
 Dynamic range:  Typ. 100 dB
 Max. SPL, peak before clipping:  134 dB
 Output impedance:  30 -  40 Ohm
 Cable drive capability:  Up to 300 m (984 ft)
 Output balance principle:  Impedance balanced
 Polarity:  Positively increasing sound pressure produces positive going voltage at pin 2
 Power supply:  For wireless For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.
 Connector:  MicroDot
 Color:  Black or beige
 Microphone weight:  7.5 g (0.26 oz) incl. cable and MicroDot connector
 Microphone diameter:  5.4 cm (0.2 in)
 Microphone length:  12,7 mm (0.5 in)
 Cable diameter:  2.2 mm (0.09 in)
 Cable length:  1,8 m (6 ft)
 Operating temperature range:  -40 °C to 45 °C (14 °F to 113 °F)
 Relative humidity (RH):  Up to 90 %
 

 

Products
d:fine Headsets
d:vote™ 4099
d:facto Vocal
d:screet™ Miniature
Miniature Omnidirectional Mics
4060 Omnidirectional
4061 Omnidirectional
4062 Omnidirectional
4063 Omnidirectional
4071 Omnidirectional
4090 Omnidirectional
4091 Omnidirectional
Heavy Duty 4060 Omnidirectional
Heavy Duty 4061 Omnidirectional
Heavy Duty 4071 Omni
Necklace Microphone
Miniature Directional Mics
4080 Miniature Cardioid
4081 Miniature Super Cardioid
Miniature Microphone Kits
EMK-SC4071
FMK-SC4071
IMK-SC4060
IMK-SC4061
LMK-SC4060
SMK-SC4060
SMK-SC4061
Boundary Layer Microphone
BLM4060
Miniature Directional Mics
SC4098
d:dicate™ Recording Mics
Adapters
Accessories