PPC4000 Phantom Power Checker

The DPA PPC4000 is designed to test if you have enough phantom power to drive your condenser microphones without changes in their specifications.

The DPA PPC4000 tests both voltage and current simultaneously, not just voltage. The test current is 3.5 mA through pin 2 and 3.

The functions are as follows:
OK: green light
Fail: red light for failure on pin 2; yellow light for failure on pin 3; red and yellow light (flashing) for failure on pin 2 and 3

Tip: Use your PPC4000 as a cable tester on e.g. your stage box. First test your console or another phantom power supply, then test your stage box and cables.