azden

AZDEN Pro Audio Wireless
Powered Speaker

Home   Audio Tech   Sennheiser Tascam Shure Sound Devices Canon Sony ProAudio Sony Panasonic JVC E-Shop Contact us Visit Singapore Store
> Home > AZDEN > AC and Battery Speakers > APS 25-UH1
Azden
Speakers
APS 25
APS 25-RH1
APS 25-RH2
APS 25-RL1
APS 25-RL2
APS 25-RS1
APS 25-RS2
APS 25-UH1
APS 25-UH2
APS 25-UL1
APS 25-UL2
APS 25-US1
APS 25-US2
APS 25-VH1
APS 25-VH2
APS 25-VL1
APS 25-VL2
APS 25-VS1
APS 25-VS2
APS-30I
APS-IRII
APS-UR5
APS-VR
APS-30I
APS-100I
IRC-1

 

 AZDEN APS 25-UH1 Powered Speaker System (Discontinued)



The APS 25-UH1 powered speaker system is a fully self-contained wireless sound reinforcement system with a single UHF wireless handheld transmitter.
Incorporating a 20 watt amplifier, the APS 25 is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.

The APS 25 includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in.

Included with the APS 25 is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and dual-voltage(110/220V) switching to facilitate installation and use. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.

The APS 25-UH1 includes a APS-UR5 UHF receiver module and the 15HT transmitter/microphone.

Speaker Technical Specs:
Rated Power: 20 Watts continuous
Frequency Response: 65Hz – 18kHz
Max SPL @ Rated Output: 101db @ 1 meter
Woofer: 5.25" (133.35mm) high efficiency - magnetically shielded
Tweeter: 1" (25mm) dome
Crossover: 1st order passive @ 8kHz
Tone Control: -6dB/octave sliding low pass (3kHz to 8kHz)

Wireless Inputs: 2 user-installable receivers
VHF (169-213 MHz) – 30 fixed frequencies
UHF (566.25-589.75 MHz) – 92 user-selectable frequencies
Infrared – 2 fixed frequencies

Wired Inputs/Output:
Mic: -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable
Line: -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable
Line-Out: +15dBv max - RCA jack

Weight: 8.5lb (3.85kg) approx. w/out receivers
Dimensions: 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm)
Compliance: UL, C-UL, and FCC approved
AC Power Requirements: User switchable, 110-125 / 210-240VAC - 50Hz/60Hz

Included w/speaker: Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, removable right-angle, AC cord, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed

Receiver Technical Specs:
Frequency Range: UHF 92-channel Selectable (566.25 MHz to 589.75MHz)
Oscillator: PLL Synthesized
RF Squelch Level: 14dBµV
Frequency Response: 50Hz - 15kHz
S/N Ratio: better than 90dB (A weighted)
Audio Distortion: <1% @ 1kHz
Operating Temperature Range: 0° - 50° C (32° - 122° F)
Power Requirements: 12V DC @ 120mA

Technical Specs:
RF Power: 25 mW
Antenna: ¼ wavelength (internal)
Frequency Response: 50 Hz - 12 kHz
Reference Deviation: ± 5 kHz (-60 dBm - 1 kHz input) - ± 40 kHz max deviation
Noise Reduction: Compander (TOKO)
Mic Element: ECM
Power Requirement: 2 “AA” Batteries (Alkaline) - 6-8 hours runtime
Dimensions: 230H x 44D mm - 9.05H x 1.73D inches
Weight: ≅130 g (4.58 oz) w/batteries)

 

Read our blogs