Audio Technica AT2050 Multi-Pattern Condenser Microphone

Audio Technica AT2050
Audio Technica AT2050   

Audio Technica AT2050 Multi-Pattern Condenser Microphone

Product Code: AT2050

Buy Sell Sales Audio Technica AT2050


Features

  • Three switchable polar patterns
  • Switchable 80 Hz high-pass filter and 10 dB pad
  • Large diaphragm for smooth, natural sound and low noise
  • State-of-the-art surface-mount electronics
  • Includes shock mount & protective pouch

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.

Element Externally-polarized (DC bias) condenser
Polar Pattern Cardioid, Omnidirectional, Figure-of-Eight, Multi-Pattern
Frequency Response 20 - 20,000 Hz
Open Circuit Sensitivity -42 dB (7.9 mV) re 1V at 1 Pa
Impedance 120 ohms
Maximum Input Sound Level 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
Low Frequency Roll Off 80 Hz, 12 dB/octave
Dynamic Range 136 dB, 1 kHz at Max SPL
Signal to Noise Ratio 77 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 4.7 mA typical
Weight 412 g
Dimensions 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
Output Connector Integral 3-pin XLRM-type
Accessories AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch